Question about NEC VT47 Multimedia Projector

Hello I have a NEC VT47 projector. I recently changed the lamo in the projector. The lamp needing replacing and projector otherwise was working fine. However after repacing lamp when i turn on the projector both the standby light(orange)and lamp (red) are lit and projector will not turn on. Both lights are constant. Please assist

1 Answer

Sanyade Akinwale

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
1,099 Answers

Hello,

first of all , did you reset the lamp counter? did you clean the dust out of the projector? it may be overheating as well. if the lamp looks ok, you may have just blown the ballast.More likely a faulty ballast. Check connections.if otherwise and you are not able to check it yourself
contact skilled personnel to handle to check the ballast..
Hope this helpout....

Posted on Jul 09, 2010

ssarai Jul 15, 2010

Hello, how will i know if the ballast has blown and where can this be located?

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Lamp light stays on after new lamp has been installed and have used remote to try and restart by pushing and holding off button and exit buyyon ?

Select Menu option locate the selection for STATUS on the menu....you should be able to resent the lamp hours from here and signify manually that you have changed the bulb...hope this helps!!

Mar 11, 2010 | NEC VT47 Multimedia Projector

1 Answer

How can i get a user manual for VT47 LCD projector user

I googled it and found one here:
http://www.aboutprojectors.com/pdf/nec-vt47-manual.pdf

Jan 08, 2010 | NEC VT47 LCD Projector

1 Answer

Audio Jack of NEC VT47 (using external speakers)

go to your menu find the volume settings. i think your volume is 0 or muted.

Oct 07, 2009 | NEC VT47 Multimedia Projector

1 Answer

NEC VT 47 projector, status lamp flashes red x 6 which the manual indicates lamp should reset after turning off after 1 minute. New lamp installed and it still will not come on. Any suggestions?

the "try again after one minute" is a trial. if the new lamp doesn't work, the problem lies with the ballast.

Sep 03, 2009 | NEC VT47 Multimedia Projector

1 Answer

Replacing lamp on nec projector

http://www.necdisplay.com/Products/Storefront/

Go to the link, the NEC has an online store, or you can use their link to find an authorized reseller.

Usually there is just some sort of door on the bottom or side held in place with a screw or two. Refer to your owners manual, or download it from NEC in pdf format.

Jan 19, 2009 | NEC VT47 Multimedia Projector

2 Answers

Blinking status light

Replacing the lamp with an old one was helpful for me. Good news: the projector itself not faulty. Bad news: I have two projectors with the same issue at the same time (the lamps were replaced also at the same time) after only 400 hours of running.

Apr 01, 2008 | NEC VT47 Multimedia Projector

1 Answer

The picture shows dark

Hi there

Take out the Projector's lamp and check for any black marks ( almost looks like veins ) on the inside of the bulb.

If you spot anything on the lamp , your lamp will need replacement.

If you can't see anything - then you might be in for a new Mainboard.

Very expensive exercise !

Mar 11, 2008 | NEC VT47 Multimedia Projector

3 Answers

NEC VT47 Lamp type VT70LP will not power up 2 red lights spear Lamp not working

When the lamp exceeds 2100hoursof service, the projector cannot turn on and the manu is not displayed. Do the following:
For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds.
For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum of ten seconds. When the lamp time clock is reset to zero, the lamp indicator goes out. Hope this helps! :]

Feb 27, 2008 | NEC VT47 Multimedia Projector

1 Answer

NEC VT47 Blink Sequence but not comming up.

If it is a lamp error try this:
When the lamp exceeds 2100 hoursof service, the projector cannot turn on and the manu is not displayed. Do the following:
For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds.
For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum of ten seconds. When the lamp time clock is reset to zero, the lamp indicator goes out. Hope this helps! :]

Feb 08, 2008 | NEC VT47 Multimedia Projector

3 Answers

Status light blinking red

If it is a lamp error try this:
When the lamp exceeds 2100 hoursof service, the projector cannot turn on and the manu is not displayed. Do the following:
For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds.
For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum of ten seconds. When the lamp time clock is reset to zero, the lamp indicator goes out. Hope this helps! :]

Oct 23, 2007 | NEC VT47 Multimedia Projector