Question about Marantz CDR633 CD Player Recorder
You have to isolate where problem is. Does a prerecorded disc play at normal volume levels? no? Check fade settings in menu. If yes, substitute another line level analog input from another device right at the recorders back panel. Test recording with that input and verify if recording level display can reach clipping level. If you have that and still have weak playback, again check for an in/out fade function being programmed. Also check volume selection in menu and try different settings, including 0.0. There is also a monitor mode to check input levels without using a test disc. Otherwise have unit checked by a repair business
Posted on Nov 22, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Hi.I have CD Recorder Marantz
DR-6000 only accepts CD-R audio or CD-R music discs, not the standard CD-R discs. the difference is that the audio and music discs have the OPC formatted differently and they cost a bit more because they include the royalties fee. Standard CD-R discs won't work in this recorder. The correct discs have compact disc "digital audio" logo on them.
Posted on Nov 22, 2010
The input side is the end one adjusts for to ensure good audio capture without distortion.
One it's digital you can play it as loud as you like.
0 dB is the absolute maximum value the Analog-to-Digital-Converter can encode. If "OVER" lights up and stays on more than mometarily you will record a constant maximum level signal with a flat top rather than the nice sinusoidal waveform of real sound. THAT could cause audible distortion at best and severe speaker/amp stress at worst.
Your task is to attempt to set a level that anticipates those loud sounds and leaves a bit of room for the outbursts. CD has so much dynamic range you shouldn't have to worry about losing the signal in the noise floor of the process. Whispering wind and crickets to roaring jet engines on the same recording is possible.
The difficulty in enjoying the entire dynamic range of such a recording is to find an environment that is quiet enough to hear the soft sounds and having speakers capable of reproducing the loudest sounds without adjusting the volume.
There IS another solution. Dynamic compression or peak limiting of the input.
Go on eBay and search for dbx dynamic range compressors. They're available in pro and home-versions.
Some models have both selectable compression and expansion.
I personally own a lot of dbx home audio gear and I recommend it.
Posted on Feb 24, 2011
Tips for a great answer:
Oct 06, 2012 | Tascam Cd-rw900sl Cd Recorder/player
Sep 22, 2012 | Marantz CDR631 CD Recorder
Jul 15, 2011 | Marantz DR-6000 CD Player
Mar 14, 2010 | Marantz CDR510 2-Disc CD Recorder
Feb 26, 2010 | Marantz CDR632 CD Recorder CDR-RW with...
Jan 15, 2010 | Marantz DR-4050 2-Disc CD Recorder
Aug 27, 2008 | Marantz CDR500 2-Disc CD Recorder
Sep 16, 2006 | Marantz CDR631 CD Recorder
107 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: