Question about Craftsman Garden

1 Answer

The unit continually stalls (model # 358.974.470)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Craftsman Master
  • 1,545 Answers

Common and annoying problem. Most of times this is a fuel delivery issue and the carb may be ready for a diaghram kit or a rebuild kit...or it may just have a little trash in it.Start with the condition of the intank fuel filter, the fuel lines, the internals of the carb. Clean the ****** with non-flammable Brake Cleaner

Posted on Aug 12, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Van stalls when taking off from a stop, what can cause this


I would definitely run a fuel pressure test see what you got

Jul 26, 2014 | PIAA 2003 Chevy Venture - All Venture...

1 Answer

My Hoover Duros (blue color, S3000 something model with the power brush) worked fine for 3 years, than it died. The other day I couldn't turn it on... What can it be? A fuse? Where's is the fist in...


manual > http://hoover.com/file/682/
To reset the breaker:

(1) Push the ON/OFF switch
http://hoover.com/file/682/completely
down. You will feel some

resistance when the switch moves

downward. The switch will also move

slightly upward on its own.

(2) Wait one minute.

(3) Repeat step 1.

(4) Turn the cleaner ON and continue

cleaning.

If the brushes continue to stall and

the breaker trips again, clean the

brushes to remove debris. (Figs. 4-1

through 4-4)
To reset the breaker:(1) Push the ON/OFF switch
completely
down. You will feel someresistance when the switch movesdownward. The switch will also moveslightly upward on its own.(2) Wait one minute.(3) Repeat step 1.(4) Turn the cleaner ON and continuecleaning.If the brushes continue to stall andthe breaker trips again, clean thebrushes to remove debris. (Figs. 4-1through 4-4)

Jul 28, 2013 | Vacuums

1 Answer

Maytag jetclean dishwasher eq plus


What is the model number?

May 21, 2013 | Dishwashers

1 Answer

Pressure continues to build then stalls


if te unit builds up pressure then stalls the motor, the unloader isnt working. it bay be corroded or the O ring are U/S

Jul 01, 2010 | Honda 2500 PSI Gas Pressure Washer

1 Answer

C2200 belt is slipping How to adjust??


If the problem is in the drive belt, either the drive belt will stop when stalled or the front roller will stop when stalled. If the motor, drive belt, and front roller continue to turn when the walking belt is stalled, the problem is with the walking belt slipping on the front roller. If the drive belt continues to turn but the front roller stalls, you may have a broken front roller pulley.
Find the motor mounts. Many motors in Icon treadmills have a main pivot joint in which a bolt runs the full length of the motor mount. This bolt will require loosening to provide maximum adjustability. Some models have a single jack bolt and others have an auto tensioner. Single jack bolts are the easiest to adjust.
the drive belt must be tensioned by hand. While one person applied increased tension to the drive belt, the other person should tighten the motor set bolt(s)

May 18, 2010 | Nordic Track /proform Treadmill...

1 Answer

I need to tighten the belt, it keeps slipping while walking on it


Unplug unit then remove motor shroud then do the following: If the problem is in the drive belt, either the drive belt will stop when stalled or the front roller will stop when stalled. If the motor, drive belt, and front roller continue to turn when the walking belt is stalled, the problem is with the walking belt slipping on the front roller. If the drive belt continues to turn but the front roller stalls, you may have a broken front roller pulley.

1) Adjusting the running belt if the problem: If the walking belt slips when walked on, UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. off the walking platform. Be careful to keep the walking belt centered.Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
2) Adjusting Drive belt: Find the motor mounts. Many motors in Icon treadmills have a main pivot joint in which a bolt runs the full length of the motor mount. This bolt will require loosening to provide maximum adjustability. Some models have a single jack bolt and others have an auto tensioner. Single jack bolts are the easiest to adjust.

May 14, 2010 | Proform 860 Competitor Treadmill

1 Answer

Help...Have 97 Nissan Cefiro with idling ans stalling issue. Problem started abtou 6 weeks ago and has been in 3 different shops now. Car will run fine for a day or two, then when sitting at a stop,...


i have had some experience with that exact prob with the exact same unit and model. it turned out to be an issue with the air flow meter module. but in your case, it's stated that you already replaced that, it may be a problem with the wiring of the air flow meter module. as oem wiring tends to be brittle after so many years. try doing a continuity test on the wires first to see if you're getting the correct voltage and resistance. if not, replace the wires and hookup terminals.

Dec 14, 2009 | 2003 Nissan Sentra

1 Answer

Dishwasher stalls


If the cycle doesn't complete, check these:

Water-heating cycle
Timer
Water-heating cycle Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows:

  • On some units, the pause is timed and the unit continues after the allotted time.

  • On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too.

Timer Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.


May 31, 2009 | Bosch SHU4006 Dishwasher

1 Answer

Replaced map sensor and mass sensor unit, continues to stall


it sounds like it is starved for fuel. you could have a bad fuel pump or your injectors are dirty (add a can of injector cleaner to fuel tank), or your uel gauge sending unit is sticking above empty even though the tank is empty.
Check for @ 40 psi of pressure at the fuel rail. There should be a shrader valve to connect a pressure gauge. If it is low, the pump is in the fuel tank Hvae to drop the tank to replace.

How does it run when cold? If better, a sign of a failing pump.

Mar 21, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Test bosch heating element


remove the kick plate at bottom of dishwasher, at the left leg there will be a wiring diagram. remove console and test element from there. diagram will show which wires to test

Nov 16, 2007 | Dishwashers

Not finding what you are looking for?
Garden Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

22486 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

rjivaro

Level 2 Expert

158 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...