Question about Uniden Cordless Phone

Open Question

One of uniden cordless head set is not working , it says register it by placing on main base please help me how to rgister it

Posted by on

Ad

5 Suggested Answers

JCinNC

James Cagle

  • 11 Answers

SOURCE: Uniden Tru8885-2

The older Tru8885 phones will not work with the new base unit. My recommendation would be to ebay those and then buy new ones or find replacements for your new base on ebay also.

Posted on Jul 19, 2006

Ad

Anonymous

  • 1 Answer

SOURCE: Uniden Cordless handset

we purchased the uninden 3 pack bundle they worked fine when installed now one handset will light up but the screen comes up blank and the handset won't work also if this can be corrected i would like to know how to purchase one extra hand set and charger

Posted on Oct 03, 2008

Ad

Anonymous

  • 98 Answers

SOURCE: Handset Fails to Register

It is quite possible that you'll need to go into the menu settings on your base-unit and reset the unit or restore factory default, whichever option it gives you. Also, look in the menu on the phone to see if there is an option to reset the handset also. After resetting the unit and/or handsets, try to register the handsets again, one at a time. If that still does not fix the problem, you may have handsets that are not compatible with your system, or your system may not be able to support that many phones. However, if you have the right handsets, and your system can host that many handsets, then I'm confident that resetting the unit and re-registering your handsets should fix your problem.
Hope this helps! Have a nice day!

Posted on Nov 23, 2008

SOURCE: Uniden Have problem

Dear....Fixya Team,

I'm Soontaree. Thank you for your reply email. I would like to let you know i'm already solved this problem. I just have a look from the Uniden Manual so i just follow them detail like as below,

Thank you for your help i will contact to you later if i have anything problem.

Have a great day.
Soontaree



Registering DSS7905 Accessory Handsets
Your phone supports a total of ten (10) cordless handsets. Handset(s) supplied in the box with the phone base are
pre-registered at the factory. If you purchase an accessory handset, you need to register the handset before use.
Only one handset can be registered at a time. When charged, pre-registered handsets display a handset ID number.
Handsets that have not been registered display.

Before registering the DSS7905 accessory handset, the battery pack MUST be charged for 15-20 hours.
To register the DSS7905 handset:

Place the handset in the telephone base charging cradle to begin registration.
During the registration process, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE. is displayed; the handset has been registered to the base. If REGISTRATION FAILED. appears,
please try these steps again. When you register an accessory handset to the base, the handset ID will be
assigned.

Note:
If an accessory handset has ever been registered to a base, you must reset the handset before you can
register it to a new base. See Resetting the Handsets on page 24.

Posted on Feb 11, 2009

Anonymous

  • 1 Answer

SOURCE: i had a uniden 5.8 cordless phone with 2extra hand

problem solved threw uniden in trash and bought another brand

Posted on Nov 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have three handset cordless phone only the main base phone work the other two says connecting when you turn it on but it wont connect it have loss its connection with the base phone


Often the handsets must be re-registered when they won't work. Sometimes they have to be de-registered, then re-registered before getting them to work. Uniden has many different model number 5.8 GHz cordless phones, send a comment with the model number and I will give specific help on your cordless. I have included a link where Uniden cordless manuals can be downloaded if you need it.

http://www.uniden.com/index/manuals_results.cfm?cat=1

Mar 27, 2011 | Uniden 5.8GHz Cordless Phone

1 Answer

No caller id coming up. Do I need to program that in the phone or should it be automatic?


IT SAYS REGISTER HEAD SET PLACING ON MAIN BASE , HOW CAN REGISTER IT PLEASE HELP

Aug 08, 2010 | Uniden 5.8GHz Cordless Phone

1 Answer

Uniden 5.8GHz and model DSS7915 have a problem


What that means is after you plug in the base set the #1 handset into the base charger for a few seconds, then put #2 handset into the base charger that registers it to that base at your house. continue on through the rest of them if you have more than 2 , They only need to be in the base for about ten seconds, then it should or might say registered on the screen,,Good Luck

Feb 10, 2009 | Uniden 5.8GHz Dual Cordless Phone

3 Answers

My Uniden cordless' handset and the base wont register Can it be bypassed or decoded


Here it is step-by-step: 1. Remove battery

2. Hold down the * and # buttons and reinsert battery. You should hear a long beep. If not retry. (This is a bit awkward but hold the handset upside down and it’s workable)

3. Screen will be blank. Immediately press the right soft menu button.

4. Screen will report that EEPROM is clearing and then state EEPROM Clear Ok

5. Remove battery (yes again)

6. Reinsert battery (this time there’s no need to hold down any buttons)

7. Handset will reboot with Welcome screen and then state that phone must be registered (this is the status a handset should be in from the factory)

8. Place handset on base and it will register as normal

Oct 26, 2008 | Uniden TRU8885 Digital Answering Machine

1 Answer

Adding a new handset


You need to register the new handset with the base.
In Global settings De-register the new handset then place it on the main base unit connected. It should then register.

Jun 30, 2008 | Uniden TRU8885 Cordless Phone

2 Answers

PLEASE REGISTER!!!!!!!!!!


You may need to "reset" the whole system1.gif. Do this by :
1 Unplug phone line, power to charger base, and remove the batteries.
2 Wait a couple of minutes.
3 Plug in batteries first, then phone line, and finally the power cord.

Then try to set the phones in the basecharger to register.

Dec 27, 2007 | Uniden Cordless Phone

2 Answers

How to REregister handsets


You can unregister your phone without being in the cradle, but to re-register them, just put them back in the cradle.  After being unregistered, they will automatically re-register once they are put back in the cradle of the main base.  Try setting them back in the base cradle to re-register, and hopefully that will work for you.

Dec 01, 2007 | Uniden TRU9480 Cordless Telephone

3 Answers

Doesn't anyone have an answer or some help? Please!!!!


Uniden TRU8885-2 Cordless Phone > User Guide E X P A N D I N G Y O U R P H O N E w w w . u n i d e n . c o m Register the Handset to the Base If you purchase an extra handset, you need to register the handset to the base before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 or #2 in the display (#2 for models that have two handsets in packaging). When you register additional handset to the base, the handset ID will be assigned. 1) Before registering the extra handset, the battery pack must be charged for 15-20 hours. 2) Place the extra handset in the main base unit to begin registration. 3) While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again. Extra Handset Extra Handset Charger Charger Main Base Extra Handset + Main Base Charge the handset for 15-20 hours. Place the extra handset in the main base to register. 1 2 3 4 ?An extra handset can be registered when the main base is in standby mode. ?Standby Mode - The handset is not in use and talk/flash has not been pressed.

Jun 26, 2006 | Uniden TRU8885-2 Cordless Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

Cindy Wells

Level 3 Expert

6073 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

martin hogg

Level 2 Expert

157 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...