Question about Whirlpool RBD305PD Electric Double Oven
F2 and e6 in combination indicate a cancel key open condition. What this means in layman's terms is that the key-panel Has a problem. If it was just recently cleaned with a wet cleaner, you can try drying the keypad off or even CAREFULLY warming it up with a hair dryer. Don't get it too hot so that you melt anything.
If this does not work, you will need to replace the key panel on the oven.
You can do this repair yourself and should you decide to, please just comment back with the full model number off the tag on the oven and I will give you step by step instructions on how to do it.
Posted on Aug 14, 2010
On my control card with a similar problem the failure was traced to a failed C6 capacitor in the display filament drive circuit on the card.
Posted on Jan 12, 2011
At www.fixyourboard.com , we repair this controller frequently. An E6 F2 error code on these parts has always been due to the control board. These controllers can be repaired quickly and reliably for a fraction the cost of a new one. If buttons are not working or you get an F2-E0 or F2-E1 then the keypad needs to be replaced.
Posted on Oct 30, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This could be either a problem with the keypad or the control. Here's the manufacturer's "recommended repair procedure":
1. Check keypad connector for firm connection.
2. Press CANCEL. If error code returns after 60 sec., replace keypad.
3. Replace control.
... not so good, they want you to replace the keypad and if that doesn't work replace the control board ... both very expensive!
First I suggest trying to clean up the keypad ribbon connection into the control board ... this is free! We put a procedure on our website that describes how to do it, heres the link:
If you come to the conclusion that the failure is due to the control board, we can have a look at it for you if your comfortable to remove it. We repair oven controllers.
Or, if you want to send us the keypad and control board as a unit (they are bolted together) we can determine which is the problem and repair as needed.
Posted on Oct 03, 2009
I wrote a blog on this topic recently, perhaps this will help you:
Posted on Mar 05, 2010
HI. This will be the result of a failed touch pad assembly. Use the procedure below to isolated the issue.
1. Once you have gained access to the touch pad assembly, Inspect the keypad connector for firm a connection. The Key pad will be connected to the rear of the man control board. Check the connectors for a firm connection. Move to step two if the connection is secure.
2. Press CANCEL. If the error code returns after 60 seconds, replace your keypad (also called touch pad or membrane switch). Some models may incorporate the keypad and control board as one unit. In this case, replace the entire control board (also called ERC or clock).
Posted on Apr 23, 2010
Testimonial: "This was the problem. Thank you! Using the self clean option can burn out the control board. "
Tips for a great answer:
Nov 03, 2010 | Whirlpool RBD245PDS Electric Double Oven
Mar 26, 2010 | Whirlpool RBD245PDS Electric Double Oven
Jan 04, 2010 | Whirlpool RBD306PD Electric Double Oven
Jan 03, 2010 | Whirlpool Ovens
Jan 11, 2009 | Whirlpool RBD245PDS Electric Double Oven
Dec 20, 2008 | Whirlpool RBS245PDS Electric Single Oven
Sep 19, 2008 | Whirlpool RBD305PD Electric Double Oven
Sep 16, 2006 | Whirlpool GBD307PD Electric Double Oven
759 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: