Question about Whirlpool Cabrio WTW6600SBT Top Load Washer
The troubleshooting page in the owner's manual says: 5d "Sd" Suds Detected - Did you use regular detergent? Regular or hand-washing detergents are not recommended for this washer. Use only High Efficiency (HE) detergent. Did you add too much detergent? Always measure detergent. Follow detergent manufacturer's directions. If excessive suds are detected, the washer will display this code while running a suds reduction correction routine at the end of the wash cycle.The susds reduction routine removes extra suds and asures proper rinsing of your garments. If te code remains and the wash cycle dial is flashing after the recovery routine has stopped, re-select your desired cycle using cold water. Press start. Do not add detergent.
Posted on Nov 04, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: when my cabrio washer gets
This code is not 5d it is sd, the "s" just looks like a five.
Sd is displayed when the machine/motor control, by analyzing drag on the basket, detects a soap suds-lock condition, and is steady on while the control then runs a mini-clean out cycle. If the clean out cycle is unable to correct the over-sudsing problem, the cycle ends and Sd flashes in the display. This may signify:
Excessive detergent usage.
Basket cannot engage during drain step.
Mechanical friction on drive mechanism, not allowing basket to engage.
Posted on Nov 02, 2010
Tips for a great answer:
Jan 05, 2016 | Washing Machines
Oct 19, 2014 | Whirlpool WTW6400SW Cabrio Washer
May 31, 2014 | Whirlpool Cabrio WTW6600SBT Top Load...
May 23, 2014 | Whirlpool Cabrio WTW6600SBT Top Load...
Dec 13, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...
code SD/5d means LONG DRAIN. This error appears when the drain time exceeds 8
minutes and the water valves turn off. After 4 minutes the "Sd" error
will be displayed, and then 4 minutes later the F21 error code will be
displayed. Press PAUSE/CANCEL two times to clear the display. Please Check the
drain hose and make sure it is not plugged or kinked. If the drain hose if fine
then unplug the washer and check the electrical connections at the pump and
make sure the pump is running. Check the drain pump filter for foreign objects.
To access the drain pump and filter remove the front kick panel and trace the
drain hose to the bottom of the washer, drain pump would be located there. If
you are not able to access it, then replace the back panel as well. Plug in
washer or reconnect power. If the issue is still not resolved then you would
need to replace the drain pump. Hope this helps...please post
back for further assistance.
Aug 15, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...
Hello & Welcome to FixYa
Error code 5d/Sd means suds have been detected. To solve this
problem you have to take the bottom front panel apart and then clean the drain
filter pump assembly completely, make sure the washer is unplugged before
working on it. Please get back to me if you have any other questions.
Jul 02, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...
Aug 11, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Jul 13, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...
4,809 people viewed this question
Usually answered in minutes!