Question about Regal Ware GL2850 Bread Maker

Open Question

Regal Ware K6761 Bread Maker

This is a brand new machine. I used it for the first time and happened to look inside while it was kneading the dough and noticed that the paddle had come off. I stopped the machine, put the paddle back on, but when I check it a few minutes later, it was off again. Neeless to say the bread did not come out. Any ideas?

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 161 Answers

SOURCE: Regal parts?

Go to e bay. They have a couple of stores that sell nothing but parts for bread machines.

Posted on Jul 03, 2008

Ad

Anonymous

  • 204 Answers

SOURCE: Regal Ware K6726 bread maker

http://breadmakerpartsemporium.ioffer.com/. They have manuals and parts for most breadmakers at very reasonable prices.

Posted on Jan 11, 2009

JSEhandyman

Jon Stignani

  • 368 Answers

SOURCE: bread paddle isn't "strong" enough to knead

Hi bex_ta,

If the paddle doesn't have the power to knead, you're probably losing torque at one or more of several points:
1) Where the paddle attaches to the shaft (is there evidence of slippage/wear in the paddle socket?),
2) Where the shaft goes through the pan (possible friction point - presumably this is what you oiled)
3) The belt might be slipping, either due to friction in the shaft, or because the belt is worn and loose.

You need to determine if the shaft is sticking, and if it's because it's bent (fairly unlikely) or if there's something fouling it. You'll need to isolate and fix that first. If you can rotate the shaft freely, then we look at (1) and (3) above - these are simple parts replacements, but the shaft would be more involved.

Belts are getting tough to find - if you can provide specs/measurements, I'm going to start contacting a small-run manufacturer to see about making some new belts, as I'm seeing multiple online requests for belt parts. If you happen to have a broken one, I'd like to get one as a sample to send to a manufacturer.

If I can be of further assistance, or if you have questions about any of my response(s), please let me know before rating me.

If this solves the issue, please rate it accordingly. My goal is to earn a "FixYa" rating from everyone I help.

Thanks for using Fixya.com,

Jon

Posted on Feb 16, 2009

lmmuresan

Laura Muresan

  • 131 Answers

SOURCE: I need new bread pan and kneading paddle for regal K6725

You can sometimes find them here: http://stores.ebay.com/Lauras-Last-Ditch/_i.html?_nkw=regal+bread&submit=Search&_sid=93311479

Posted on Sep 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kneading Paddle


All bread machines have a final "punch down" of the dough that lasts a few seconds before the final rise stage. When "punch down" is over that is when you can remove the dough ball, remove the paddle, set it aside and place the dough ball back in the pan. It usually helps to have your hands dusted with a little bit of flour.

Apr 21, 2013 | Morphy Richards Kitchen Appliances -...

1 Answer

Paddle problems.


All bread machines have a final "punch down" of the dough that lasts a few seconds before the final rise stage. When "punch down" is over that is when you can remove the dough ball, remove the paddle, set it aside and place the dough ball back in the pan. It usually helpsicon1.png to have your hands dusted with a little bit of flour.

Apr 21, 2013 | Morphy Richards 48280 FastBake Bread...

1 Answer

Why did the kneading paddle on my 1148X bread machine quit working. This happened the third time it was used. It did the initial mixing and resting. When it started the kneading process again, the blade...


Hi, If this is the third time using it, it could be defective. Return it for service. If not under warranty, try a few things. 1) Make sure the pan is inserted in the machine correctly. 2) Make sure that the paddle is not sticking, or the sealed bearing on the bottom of the bread pan is not broken or frozen. (Take pan out and see if you can turn the paddle freely by hand). Or finally, the belt may be loose and slipping, especially when it takes more power to knead the dough the second time. Good luck...Hank

Jun 12, 2010 | Toastmaster 1148X FastBake Bread Maker

1 Answer

I have the 5890 Sunbeam breadmaker, I love it except for the kneading blade bakes right in the bread, how can you give a loaf away with that in it?


Hi,
You can take the paddle out of the bread pan after the last kneading cycle and before final rise. Do this rather quickly if you don't have a pause feature so you don't lose any rising time.

Take the bread pan out of the machine, put dough in a bowl, remove paddle, put dough back in pan, put pan back in machine.

Some people suggested to spray a small squirt of olive oil on the shaft to prevent sticking.

Hank

Aug 29, 2009 | Kitchen Appliances - Others

1 Answer

Can the kneading paddle be removed before baking?


Hi,
Yes you can remove the paddle before baking. The cuizinart has a buzzer that sounds when to take the paddle out

If you want to take the paddle out you should make sure your machine has a pause feature so you don't lose any rising time.

Take pan out of machine, empty dough into a bowl, remove paddle, squirt the shaft in the bread pan lightly with veg oil (prevents sticking) then return the dough after final kneading time and before final rise.

Hank

Aug 26, 2009 | Kitchen Appliances - Others

1 Answer

Need kneading paddle


Not sure of your Model number but you can get replacement paddles for model 41080 and 41085 at https://www.amazon.com/Replacement-Kneading-West-Bend-Machines/dp/B001UM1HYA for $20.49

Oct 30, 2017 | West Bend 41089 Bread & Dough Maker

1 Answer

Kneading paddle having problem kneading


Sounds like you might need a new belt. If it works ok with nothing in it but wont when the dough is in there

Feb 13, 2009 | Breadman TR875 Bread Maker

2 Answers

The ingredients aren't mixing. I have to take the dough out and


My experience with the machine is that it kneads perfectly, but you have to use ACTIVE DRY YEAST instead of another kind of yeast, and you have to throw the ingredients into the pan in order - do not mix the ingredients at all - just pour them in, and let the machine do the mixing. Except for substituting between BREAD FLOUR and WHOLE WHEAT FLOUR, do not substitute any other ingredients. This one is very picky about the type of ingredients that you use - not for the innovator :-)

-Tha Mp3 Doctor

Feb 06, 2009 | Cuisinart CBK-200 Bread Maker

3 Answers

Paddle won't come out


I've had pretty good results with a crochet hook (use a metal one that can be run through your dishwasher). Insert the hook through the hole in the paddle and it should catch on the far side just enough to pull the paddle out of the loaf. Best to do it before it cools and the crust hardens, though.

Sep 23, 2006 | Black & Decker B1561 Bread Maker

Not finding what you are looking for?
Regal Ware GL2850 Bread Maker Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Regal Ware Kitchen Appliances - Others Experts

Irene Tulloch

Level 2 Expert

498 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Regal Ware Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...