Question about Malibu Hardware & Accessories
My malibu transformer has a reset button on the back near the terminal connections. If the transformer is on (time displays on the panel) but the light fixtures are not lit, look for the reset button on the back and depress it.
Posted on May 01, 2013
>knowledge base search is located top right corner of website
> I serched knowledge-base for 'lights not working' >>> came back with thin results
> Evidently Malibu doesn't have knowledge of lights not working
Here's simple test: Leave unit plugged in. Remove wires from unit. Use On-off dial to turn ON system. Use wire to scratch across terminals where wires connect >> do you see any sparking that would indicate voltage is present? if voltage is present, your lights may be burned out from last night's power surge ... or those pesky contacts that connect light to the main wire need to be re-done. More info on burned out lights below
another clue: is malibu box warm when you touch it? Transformers get warm because 120V continually runs through a coil ... and the magnetic field from the first coil creates lower voltage in another coil. Same as your phone charger. Transformer runs 24-7. The timer does not turn off the transformer, it just switches off the main wire going to lights
If transformer is warm, it says that power is available. That would narrow problem down to timer mechanism. You might try turning malibu upside down for a couple days in dry environment and see if that revives the unit.
If transformer does not feel warm, then transformer is probably burned out. Electrical devices go bad, especially when exposed to weather.
Malibu manual has some troubleshooting steps located below step 8.
-You checked electric supply.
-Turn on-off dial to ON to see if override works
-Troubleshooting mentions power conditions/ voltage conditions ... which I assume would include power surge ... it doesn't say specifically that this causes transformer failure .. but it points to bulb failure.
-Troubleshooting mentions burned out lights ... I think they are saying that once a light burns out, that voltage is increased to other lights and burns them out too
Transformers don't have a reset button.
Posted on Oct 07, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 09, 2015 | Malibu Hardware & Accessories
Jul 15, 2015 | Panasonic TC-P50G15 50 in. Plasma HDTV
Dec 27, 2013 | Computers & Internet
Apr 24, 2012 | Home
May 24, 2010 | Intermatic Malibu 300W Power Pack...
Aug 07, 2009 | GE Monogram ZE2160SF Convection /...
Jul 10, 2009 | Malibu ML200RT - Low Voltage Power Pack...
Feb 01, 2009 | DISH Network Televison & Video
Jan 03, 2008 | Computers & Internet
7,219 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: