Question about Euro-Pro 473

2 Answers

EZ-Lift Mechanism for Sewing Cabinet

Any Idea who is the Manufacturer of the EZ-Lift Mechanism for Sewing Cabinets or whom sells them? I have an old Solid Maple Flush Cabinet that I want to have retro fitted with one.

Posted by on

  • Anonymous Dec 09, 2008

    Either I do not know how this sytem works or I am expecting to much, as, the Solution #2 statement "How to install Ez-lift mechanism for sewing cabinet" does not tell me anything and there are no apparent Links to use to help you with anything?????

    Where is the information?



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 190 Answers

Try this place, I have had good luck with them.,48759&ap=1

Posted on Jun 03, 2008

  • Rosanna Razo
    Rosanna Razo Oct 08, 2012



  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to install Ez-lift mechanism for sewing cabinet

Posted on Dec 08, 2008


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do you have instructions to replace a pulley on a Horn Sewing Cabinet (manual lift sewing section)? Thank you

you can find many types of repair help here for your cabinet.

horn sewing cabient repairs

just google that and select the one you need or explore til you find it.

Sep 15, 2018 | Sewing Machines

1 Answer

I have a singer 301a machine from a cabinet. The needle mechanism does not work at all, but the motor turns. Am I missing something? George

Could be seized due to old oil that has dried. Could also have a belt that is slipping or broken. Does the needle move if you hand rotate the handwheel?

Wheel on right side that controls the needle up and down is very tight...

Information about your machine:

Singer 301 About the Singer 301

Jul 31, 2017 | Singer Sewing Machines

2 Answers

Is there a zipper foot available for the consew 146rb?

Ask the manufacturer this question . we have no idea

Sep 27, 2015 | Consew Sewing Machines

1 Answer

Wire is stuck on ez lift for sewing cabinet

try using some penetrating oil on the screw that doesn't want to come loose and see if that will help.

May 04, 2014 | Euro-Pro 473

1 Answer

Yahoo group

Is your machine an Air Electronic SU? these were numbered 68 and 69, one was the standard base, the other a duplex base designed to go into a cabinet. The duplex base ones have a dished shape lower plate and the machine can be pivoted up out of the base to use as free arm, or lowered back down to use flush. The standard model has a flat base with four rubber feet.

So if your machine is a standard base Elna then you need to set it on a lowered platform so the top of the free arm is level with the top of your cabinet surface. You may have to rig up something suitable to achieve this different level rather than mounting the machine itself.

Horn sewing cabinets allow you to do this, you set the hydraulic lift platform to the right level so the top of the arm is level with the top of the cabinet, then they sold a persplex piece that would fit around the machine filling in the area between the free arm and the outside of the platform area giving you a flush platform.

Oct 24, 2013 | Elna Sewing Machines

1 Answer

Singer 6110

If it can be attached, there will be a set of screws/hinges on the back side of it.

I actually modified a sewing machine cabinet to be able to place my machine inside for storage, on its side. When sewing, I have
the modified board on the hinge and the machine sets on top of that. When not is use, cabinet looks like a "table" cabinet.

More info, contact

Aug 28, 2013 | Sewing Machines

1 Answer

I have a horn cabinet bought in 1987 and I can't

The old Horn lifts had vertical rails on the sides and the newer style has one center support. Push the lever up and press down on the platform to lower, push up on the lever and the platform should raise. If it binds, the plastic slides are broken or if the cables are loose, then the lift is likely broken.

Jul 29, 2011 | Sewing Machines

Not finding what you are looking for?
Euro-Pro 473 Logo

3,224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides