Question about Jet 3 Ultra Power Chair
Then you must have a charger problem. If you have a digital voltmeter or access to one. Set it to 200 volts dc and plug the leads into the two outter holes of the charger port located under the front of the joystick. Without the charger plugged in you will be reading the current voltage of the batteries. Now plug the charger cord into the wall socket and the reading on the meter should go up to 26-30 volts. if it doesn't change the reading after a few minutes then the charger is bad. Now you can get an off-board charger for your chair somewhat cheaper than an on-board charger. If you have a friend or neighbor that has a chair or scooter with an off-board charger you can borrow it for a few hours to charge your chair until you can get a charger of your own. Check on e-bay for any good 4 amp charger for a power chair it would work fine to charge your chair. Hope this helps you
Posted on Oct 20, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 31, 2016 | Pride Used Mobility Jet 3 Power Wheel...
Aug 23, 2012 | Invacare Supply Group Invacare Pronto M91...
May 07, 2011 | Jet 3 Ultra Power Chair
Mar 04, 2011 | Jet 3 Ultra Power Chair
Feb 03, 2011 | Jet 3 Ultra Power Chair
Feb 02, 2011 | Jet 3 Ultra Power Chair
Jan 22, 2011 | Jet 3 Ultra Power Chair
Nov 07, 2010 | Jet 3 Ultra Power Chair
May 21, 2010 | Pride Jazzy 1103 Ultra Standard Power...
May 29, 2009 | Invacare Supply Group Invacare Pronto M91...
40,801 people viewed this question
Usually answered in minutes!