Question about Minolta bizhub 200 All-In-One Printer
Help for resolving the error code C1183 of muy Konica Minolta C252
First check the alignment front and rear of the finisher, check the finisher exit guide rollers if the paper is exiting properly, open both rear and the front cover and check the lower gears attach is the up/down drive belt. that lower gear one might be broken by the pin slot.
Posted on Jul 09, 2009
Tray lift motor failure on the finisher.
C1183 Finishing option elevator drive
See FS-514 Service Manual.
Posted on Jun 25, 2009
Sounds like you have a finisher with the optional output tray and the selector is not in the right position. OR you have a bad ground.
Something with your finisher most likely. I wouldnt tear it apart to check wiring unless you started with the obvious.
Posted on Jun 09, 2009
This problem belongs to elevetor motor of your finisher check by power off and on its going to initialize or not if not open eleveter section and reassemble it
Posted on Jul 07, 2009
Posted on Jul 25, 2013
Konica minolta di470 1808 error code
Posted on Jul 03, 2013
I have a KONICA MINOLTA bizhub 7115, but I do not know the code developer (ATDC - auto adjust), please let me know. thank you
Posted on Mar 04, 2015
Posted on Oct 05, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 14, 2015 | Konica Minolta BizHub C252
May 23, 2015 | Konica Minolta Bizhub C451...
Dec 11, 2014 | Konica Minolta bizhub Office Equipment &...
Apr 01, 2014 | Konica Minolta bizhub C250 All-In-One...
Feb 14, 2014 | Konica Minolta bizhub Office Equipment &...
Error code C1183 means finishing option elevator drive malfunction. It appears due to tray lift motor failure on the finisher. To trouble shoot the issue turn off the power and open the elevator section to check the elevator motor. Wait for 2-3 minutes and check if the issue is resolved. If this doesn't work then check the alignment of front and rear rollers of the finisher. Also make sure that the finisher exit guide rollers are fine & the paper is exiting properly, open both rear and the front cover and check the lower gears attach is the up/down drive belt. Sometimes this error may appear due to a broken lower gear by the pin slot. Hope this helps...
Oct 09, 2010 | Konica Minolta Office Equipment & Supplies
Mar 11, 2010 | Konica Minolta bizhub C250 All-In-One...
19,719 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: