Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F dl I get the clicking and F with dl. The washer does not come on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Error F dl indicates door latch failure and to resolve this issue you'll have to replace the door latch assembly. Also before doing this you can leave the washer unplugged for 30 minutes and then check the door latch assembly, if bad replace it. Please post a comment if need more help.


Thanks

Rylee

Posted on Nov 01, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Maytag Brovo 300 seies washer display says dl and will not wash


The error code "dl" is for door lock. From what I've read, it may mean you need to replace the latch assembly.

Sep 07, 2014 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

Whirlpool GHW9400 Door will not latch. Washer turns on, Starts clicking then flashes dL F


Hi, DL means Door Lock Failure while F is either (F80, 82,
84, 85).....

DL flashes if the following conditions occur:
  • Door lid is not closed completely due to interference.
  • Wash media buildup is preventing the lock bolt from extending.
  • Machine/motor control detects open door lid switch when attempting to lock.
  • Machine/motor control cannot determine if door lid is in a locked state.

Oct 03, 2010 | Whirlpool GHW9400 Duet Washer

1 Answer

Clicking and F dl error


Error code stands for door lock. May need a new door lock.

Oct 23, 2009 | Kenmore HE3T Washer

1 Answer

The display keeps flashing DL and I hear a clicking noise in the top of the washer.


On this washer, the dl code indicates a failed lid lock mechanism. Pressing pause/cancel should reset the controls.

You may have to unplug the unit for 20-30 minutes, then restore the power.

If that doesn't work, the only other solution would be to replace the door lock assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

Oct 20, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Dl on screencliccking noise from behind washer won't run


That is the solenoid clicking. dl is a door lock error, and you can test and replace the door lock switch, but I am doubtful that will correct the problem. I really hope it does, but I have seen the dl code with the solenoid clicking at the rear of the(Whirlpool Duet) washer before and it was a faulty control board. I hope I am wrong, but... You can try unplugging and resetting the washer. In the case I saw, the machine would reset, but gradually got to a point that it had to be reset numerous times. (too many). Anyway, I hope I am wrong and best wishes. (Don't forget to test the door lock switch. Use a multimeter and check for continuity. A lack of continuity indicates a faulty switch. Hope this helped.

Aug 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My washer has an F dl problem?


Fdl is a code that indicates a door lock error. The clicking sound that you hear is most likely the door lock. This error occurs because the door cannot be locked. The door will try to lock six times before displaying the error code. You have a faulty door lock switch. Hope this helped and best wishes.

Jul 31, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a whirlpool duet washer front load and its giving me a message of dl f. I can hear it trying to click but nothing happens.


This should indicate a door lock error and the clicking is the door trying to lock. The door is supposed to attempt to lock six times before the dl error is displayed. It is most likely caused by a faulty door lock switch. Hope this helped and best wishes.

Jul 31, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The washer will only click and not turn on. F DL


Door lock error


A Door Lock Error occurs if the door cannot be locked. It will try to lock it 6 times before displaying the error.

Potential Causes

• Door Lock Mechanism broken or removed from the Door
• Check Door Lock/Switch Assembly
• Check the wire harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU)
• Door Lock/Switch Assembly Failure

Replace failed component.

Jul 11, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error F dL?


remove the top cover of washer at rear is the main control bd try wiggling the wires on front side usuually the larger wires if it works bad connections on control no fix but to replace it ..HOWEVER try shimming the plugs in place to hold them in position where it will work...possible door lock itself but control more likely

Sep 06, 2008 | Kenmore 46462 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...