Question about HP 1050 Plain Paper Inkjet Fax
If it is registering a paper jam, than more than likely there is some sort of obstruction in the paper path that is obscuring one of the sensors. My recommendation, manually feed a piece of thick card stock through the paper path and try to force any debris out. Also, you can try blowing a can of air through the path, this act should hopefully free any debris or dirt that is blocking the jam sensor.
Posted on Nov 03, 2010
Testimonial: "Did what you said to do and problem was solved. Thank you............"
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 16, 2013 | Epson ME OFFICE 900WD MULTIFUNCTION INKJET...
May 04, 2012 | HP 1010 Plain Paper Inkjet Fax
May 05, 2011 | Lexmark X125M All-In-One Printer
Ensure that all cables are securely connected. First, make sure that the printer cable connecting your computer to your printer is connected securely. Then, make sure that the power cord is inserted into a wall outlet. Try your print job again after you have ensured that all cables are properly connected.
Clear a paper jam if your printer is not responding or you are receiving a "Paper Jam" error message on your printer. To clear a jam, first open the rear output door by pushing down on the two levers on each side of the door. Opening the rear door simply makes it easier to clear a jam. Open the top cover on the front of the printer by pressing the release button on the right side of the printer. Locate the paper jam and use two hands to gently remove the paper jam. Try your print, scan, fax or copy job again.
Clear stored or saved faxes if you are having trouble sending or receiving faxes. Old faxes may be stuck in the fax queue, which may be causing the printer to not respond. To remove stored faxes, press the "Menu" button on the printer and select "Fax Functions." Then select "Clear Saved Faxes." Wait for the queue to clear and try your fax job again.
Remove paper from the automatic document feeder (ADF) input tray if your scan job is coming out crooked. The ADF input tray can only hold up to 50 sheets at a time. If there are more than 50 sheets in the input tray, the output may appear skewed. Try your scan job again after removing the paper.
Adjust your computer monitor's display settings if your scanned image is not an accurate representation of the original image. This can be done in the "Control Panel" in Windows. Set the settings to the highest possible resolution and try your scan job again.
Perform a power cycle on your printer if the previous steps were unsuccessful. To do this, turn off your printer, then unplug it from the wall. Wait a few minutes and plug the printer back in. Try your print, scan, fax or copy job again.
Oct 04, 2010 | HP LaserJet 2840 Printer
Mar 19, 2010 | HP 1050 Plain Paper Inkjet Fax
Oct 20, 2009 | HP 1050 Plain Paper Inkjet Fax
Mar 05, 2009 | HP Officejet 7210 All-In-One InkJet...
Feb 27, 2008 | HP LaserJet 3055 All-In-One Printer
Feb 16, 2008 | HP PSC 2355 All-In-One InkJet Printer
133 people viewed this question
Usually answered in minutes!