Question about Black & Decker B2000 Bread Maker

1 Answer

When I put the flour in the baking pan,I can heard the rotating shaft is working ,but the mixing paddle doesn't work.and when the baking pan is empty,I turn round the mising paddle feeled very tight.Where I can repair it?

Posted by on

  • Daryl Nash
    Daryl Nash Nov 04, 2010

    Let's start over....empty all the ingredients out and discard them. clean your pan and paddle with soapy water and reinsert the pan without the paddle. Turn your machine on basic program and push start. Is the spindle in the bottom turning? If yes, then push stop and put the paddle on the spindle and repeat. Does the paddle turn around? If the answer is no to both questions then you have probably thrown a belt or the belt has snapped and you need to have your machine serviced.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 433 Answers

Hi, The sealed bearing and paddle shaft can not be repaired. You will need to purchase a new bread pan..... Sorry. Hank

Posted on Nov 05, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

When i put in the baking pan, the kneading blade does not move


If the motor is working and the paddle doesn't move, take the pan out and see if the drive shaft is turning. If not then it's probably a broken belt. If it is then check for a seized shaft in the pan.

Mar 29, 2015 | Sunbeam 5891 Bread Maker

1 Answer

How do i tighten the belt for the paddle?


It's a timing belt, so it isn't supposed to stretch. There is no tension adjustment that I can see. Are the 4 motor screws in place and tight? Is either the motor or the kneading paddle drive shaft turning in its drive wheel? Is the frame bent and causing the belt to walk off one of the pullies? Another problem can be that the bearing in the pan won't turn, then you'll get a loud bump as the drive mechanism tries to turn the paddle in the pan. If this happens, try to free up the paddle by hand so it turns. Then when you bake, always put the oil in the recipe in first and rotate the paddle a few turns to work the oil into the pan bearing. If the oil gets in first, it will keep the water out and the pan will work fine. I've been getting away with this approach for hundreds of loaves.

Jul 02, 2014 | Cuisinart CBK-200 Bread Maker

1 Answer

Can't remove kneading blade


If you baked bread in it and cannot get the paddle free, put enough water in the pan to cover the paddle and let it set for 5 or 10 min to soak the bread crust that formed between the shaft and the paddle. Then take a hold of the shaft on bottom of pan with hand or pliers to hold it still and try to work the paddle clockwise with other hand until it becomes unwedged from shaft. Sometimes it gets wedged on shaft pretty tight due to the beating against dough ball and cooked bread holds it tightly wedged.

Apr 06, 2014 | Sunbeam 5891 Bread Maker

1 Answer

Mixing paddles come off during mixing, am using teflon tape on shaft to hold paddles on, what is a better fix?


Sound like you need new shafts or paddles and I know the paddles can cost $30 each. so think about a new model or buy one at a thrift store and try those paddle or use the machine. I got a great one for $10 . :)

Jul 30, 2017 | Black & Decker B2300 Bread Machine

1 Answer

I just bought your breadmaker B2200 and i am looking for recipes for a basic white and whole wheat bread.The booklet does not have basic recipes. I am looking forward to baking bread for a long time to...


Basic White

1 1/3 cups lukewarm water
2 tablespoons powdered milk
1 1/2 teaspoons salt
1 tablespoon sugar
2 tablespoons butter or margarine
3 3/4 cups white flour
1 teaspoon yeast

1. Measure ingredients in the order listed into Baking Pan.
2. Insert Baking Pan securely into unit; close lid.
3. Select BASIC setting and 2.0 lb. loaf setting. Choose LIGHT or DARK crust setting.
4. Push Start button. There will be a 15-minute preheat delay before mixing begins.
5. The Complete Signal will sound when bread is done.
6. Using pot holders, remove Baking Pan from the unit and carefully turn bread out of Baking Pan. (Mixing paddle may remain in bread. Remove paddle when load if cool.)
7. Allow to cool before slicing.

Time 3:50 hours

100% Whole Wheat

1 1/2 cups lukewarm water
2 tablespoons powered milk
1 1/2 teaspoons salt
2 tablespoons honey
2 tablespoons molasses
2 tablespoons butter or margarine
3 3/4 cups whole wheat flour
1 3/4 teaspoons yeast

1. Measure ingredients in the order listed into Baking Pan.
2. Insert Baking Pan security into unit; close lid.
3. Select GRAIN setting and 1.5lb. loaf setting.
4. Push Start button. There will be a 25-minute preheat delay before mixing begins.
5. The Complete Signal will sound when bread is done.
6. Using pot holders, remove Baking Pan from the unit and carefully turn bread out of Baking Pan. (Mixing paddle may remain in bread. Remove paddle when load if cool.)
7. Allow to cool before slicing.

Time: 4.10 hours

Feb 19, 2011 | Black & Decker Bread Machine

1 Answer

The machine gets warm but the paddle doesn't turn.


Hi, The paddle should turn freely by hand with the bread pan out of the machine. Make sure the pan is inserted in the machine correctly. If the motor shaft turns but the paddle doesn't then the sealed bearing that the paddle rotates on has failed and is frozen so the paddle does not turn.. You may need a new bread pan. Hank

Jul 01, 2010 | Kenmore KTR2205SPR Bread Maker

1 Answer

When i put the ingredients as directed, i selected the program then put the delay on. when i woke up expecting fresh bread, i had a hard 3 inch brick with flour and yeast sitting on top of it. was i...


No, Everything should be done automatically. It seems that the machine did not knead the dough. Two things may have caused this. 1) The paddle is frozen and wont turn. Take the pan out of the machine and see if you can rotate the paddle by hand. If yes...that's cool, if no then the sealed bearing that the paddle rotates on is jammed or broken. Try filling the pan with warm water and let it soak. If after a few times it's still frozen, then the bearing is broken and bread pan needs to be replaced. 2) Belt fell off or is snapped. Keep the pan out of the machine and go to a kneading cycle. Look through the window on the lid and see if the motor shaft is turning. If no... the belt fell off or snapped, or the motor is broken. Good luck..Hank

Dec 03, 2009 | Oster 5836 ExpressBake Bread Maker

1 Answer

I have been happily making bread for a while with my welbilt machine. I put ingredients in the other day pushed my usual buttons and nothing happened. I reprogrammed and after an hour it started to bake....


Hi,
Take out the bread pan and put the paddle on the shaft. See if it spins freely. If it does not spin freely it could be stuck, or the bearing is frozen.

If it spins freely, put the pan and paddle in the machine and start it up with nothing in it. If the paddle does not spin then it is either your drive belt is snapped or worn, or the motor is broken.

Hopes this helps,
Hank

Aug 27, 2009 | Kitchen Appliances - Others

1 Answer

Sunbeam 3500s


Hi,
It seems the kneading paddle isn't spinning. Clean out the pan and take it out of the machine. Put the paddle on the shaft and see it it spins freely. If it does not, then the shaft is stuck or the bearing is frozen.

Next keep the pan out of the machine and start the bread maker up. Look through the clear top and see if the shaft is spinning. If not then the drive belt is broken.

If paddle is okay, and belt is okay, then the motor is broken.
Hank


Aug 25, 2009 | Sunbeam Kitchen Appliances - Others

1 Answer

My Black and Decker All in One Automatic breadmaker seemed to be working fine. It was making the right sounds but when it finished the bread was not mixed. The yeast was still on top with the flour and the...


Hi,
Empty the bread pan and clean it out. Put the pan and paddle back in the machine but do not add ingredients. Start the bread cycle and look in the window (or lift the lid) during the mixing cycle. You should see the paddle spinning around.. If not you probably need a new belt.

Hank

Jul 27, 2009 | Kitchen Appliances - Others

Not finding what you are looking for?
Kitchen Appliances - Others Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Kitchen Appliances - Others Experts

Irene Tulloch

Level 2 Expert

498 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Cindy Wells

Level 3 Expert

6069 Answers

Are you a Black & Decker Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...