Question about Zebra LP 2844 Thermal Printer

3 Answers

Wont print this printer has always worked and it functions all but the labels come out blank.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check to make sure you have direct thermal labels. You can test this by scratching your fingernail across the label quickly. You should see a black line. This printer uses the same paper as a ups or fedex label. test a ups of fedex label with the fingernail test. Does it look the same? or call Andrew @ 908-725-1699

Posted on May 08, 2009

Ad

J'ai le meme probléme, sous wind xp et j'utilise le programe fourni dans le cd de zebra

Posted on Jul 03, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 148 Answers

What program are you using to print with and what operating system?

Posted on Jun 28, 2008

2 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 31 Answers

SOURCE: I have a zebra TLP 3844-Z printer. My printer

Sounds like it is set to do a label length check at power on. Go into your printer preferences and set it to "do nothing" on power up.

e07a00e.jpg

Posted on Jun 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Prints label then prints a blank


This is always a calibration or label template size issue.

Feb 04, 2013 | Zebra Eltron LP 2824 Thermal Printer

1 Answer

Zebra TLP 2844 label gaps


you can try contacting zebra. im not familiar with that model.

Aug 25, 2017 | Zebra TLP 2844 Label Printer

2 Answers

Kodak printer will not print on avery label paper. Have been on teck support with anurag s for about an hour and tried again to print labels.


Hi , i have been using avery templates and label paper at work for ages and always printed off without problems on my lexmark . I bought a Kodak however and all of a sudden I could no longer print off my labels , when I put paper in it just came out blank and said paper wrong size .I could not find any solutions at all and was tearing my hair out . I just kept trying different things and all of a sudden I changed a setting and it worked perfectly.When you go to print your label change the ' scale to paper size ' function to A4 and then it will print.
hope this helps

Feb 28, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

When I go to print labels, I always get the message to Load MPF paper


I think it wants you to put the blank labels in the multi purp. tray or tray 1

May 13, 2010 | Dell 3100cn Laser Printer

1 Answer

Printing in page mode feeds extra blanc labels


Make sure,
you firmware is right one for that printer because in most of cases it happens due to wrong firmware and bad ADF kits. so check your ADF kids and if you find them fine the install updated firmware on in.
And put job seperator option always as disabled2168eac.gif
once you done with these all then turn your printer off and turn it back on.

post back if any thing changes and rate all answers.

Good luck



Feb 24, 2009 | Epson TM-L90

1 Answer

Printed Tape Cuts Off Letters


I was having the ame issue. Found the solution on the user manual (posted online). Press Function, scroll to "Margin", press "Function", use arrows to select "#" or "##", then press Function again. Now it should print with a margin, thus not cutting off your letters. Mine was set to "-", which is basically no margin.

Dec 29, 2008 | Brother P-Touch 1180 Label Printer

2 Answers

I get 2 labels(1 with data and 1 blank)for every label printed


THE LABEL SENSOR IS NOT SENSING THE BEGINNING OF THE NEXT LABEL

Clean the photo eye that senses the label gap with a q tip and alchol

Open side door release print head and remove label stock you will see small photo eye clean

put printer in manual mode( switch 1 on to and 1 on botom on

turn printer on it should advance one label and hit skip it should advance another

put back in computer mode

should work now if it still skips check yur label desigh=n software and label mode (continuous or sense label)


Best of luck to you



Dec 29, 2008 | Intermec EasyCoder 3400 Thermal Label...

1 Answer

Printing blank labels


I am having the same problem! Printing blank labels. Don't know what's wrong now. It was working fine yesterday.

Jul 22, 2008 | Dymo LabelWriter 400 Thermal Printer

Not finding what you are looking for?
Zebra LP 2844 Thermal Printer Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...