Question about Ultra Linear UL-2200D Car Audio Amplifier
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: ultra linear ul-600hc
If the amp is in protect mode, it probably has shorted output transistors. To eliminate other possible problems, do the following. I'll assume that you've checked the amplifier's on-board fuses.
With your multimeter set to DC volts, the black meter lead on the ground terminal of the amp (not on the point where the ground wire connected to the vehicle) and the head unit on (so the amp will have remote voltage applied), touch the red lead alternately to the B+ and remote terminals of the amp. If the voltage is below ~11 volts, you need to check the wiring feeding whichever line is too low.
If the voltage remains near or above 12v, disconnect all speaker wires from the speaker terminals of the amp and disconnect signal cables from the amp. If it powers up, the wiring needs to be checked. If it still shuts down, the amp almost certainly has shorted output transistors and will need to be repaired.
Let me know if you have any other questions.
Posted on Aug 26, 2008
Tips for a great answer:
Mar 31, 2013 | Ultra Linear UL-2200D Car Audio Amplifier
Apr 02, 2011 | Ultra Linear UL-2200D Car Audio Amplifier
Aug 12, 2010 | Ultra Linear UL-2200D Car Audio Amplifier
Apr 28, 2010 | Ultra Linear UL-2200D Car Audio Amplifier
Jan 16, 2009 | Ultra Linear UL-2200D Car Audio Amplifier
Dec 23, 2008 | Ultra Linear UL-2200D Car Audio Amplifier
Jun 21, 2008 | Ultra Linear UL-2200D Car Audio Amplifier
Feb 20, 2012 | Ultra Linear UL-2200D Car Audio Amplifier
89 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: