Question about Weiser Lock POWERBOLT ELEC DEADBOLT

1 Answer

We put new batteries in the lock, and the lock starts beeping for about 30 seconds, then it stops for a minute or two, then starts beeping again. And this continues until you totally pull a battery out.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 963 Answers

To determine why your lock is beeping abnormally, please follow these steps:

Take out batteries and unplug powerstrip.
Let it sit for 1 minute, then put the batteries back in and wait another minute.
If it does not beep, the keypad needs to be replaced (17733-1).
If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).

Navigate to the complete page that I cut this from can be found by cutting and pasting this link into your browser search bar:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Then go to: US & International/FAQ Categories/Keyless Entry/Powerbolt 1000/Search Results/ How do I troubleshoot my Powerbolt 1000?

I suggest calling the appropriate toll-free number and having a conversation with a representative about this problem, first of all to confirm that you need the part before you go through the expense. Secondly, your lock may be new enough for you to talk them into warrantying it, and thirdly, they will be able to get the correct part on order for you.

Good luck--and please provide feedback if this helps!

Posted on Nov 09, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Weiser powerbolt lock is beeping-changed batteries-won't stop


Why is my Powerbolt 1000 unit beeping?
To determine why your lock is beeping abnormally, please follow these steps:
  1. Take out batteries and unplug powerstrip.
  2. Let it sit for 1 minute, then put the batteries back in and wait another minute.
  3. If it does not beep, the keypad needs to be replaced (17733-1).
  4. If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).
Contact Customer service from here:
http://www.weiserlock.com/CustomerService/ProductSupport/SupportContact.aspx

Good luck!

Jan 09, 2012 | Weiser Lock Powerbolt 1000 Lock

1 Answer

Hi. Have had the lock on for at least 5 yars and has worked fine but now suddenly a problem. Locksmiths say its electrical so not their problem and vice versa so very frustrating.. Heres the...


This is the relevant excerpt from the Powerbolt programming and troubleshooting instructions:

Why is my Powerbolt 1000 unit beeping?

To determine why your lock is beeping abnormally, please follow these steps:

Take out batteries and unplug powerstrip.
Let it sit for 1 minute, then put the batteries back in and wait another minute.
If it does not beep, the keypad needs to be replaced (17733-1).
If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).

The complete page that I cut this from can be found by cutting and pasting this link into your browser search bar:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Since you've already gone through the battery change, this suggests that you need to replace the appropriate Powerboard for your lock.
So this is the link to Weiser Customer Support Page:

http://www.weiserlock.com/en/CustomerService/ProductSupport/SupportContact.aspx

I suggest calling the appropriate toll-free number and having a conversation with a representative about this problem, first of all to confirm that you need the part before you go through the expense. Secondly, your lock may be new enough for you to talk them into warrantying it, and thirdly, they will be able to get the correct part on order for you.

Good luck!

Jun 25, 2011 | Weiser Lock GED1460X GED1460X15A Antique...

1 Answer

My lock works for awhile then stops. The beeps sound all the time, then stops locking & unlocking using the keypad. Then a day or two it works again.


Here's a link to the Powerbolt 1000 frequently Asked Questions page:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

You will find this answer on that page:
Why is my Powerbolt 1000 unit beeping?
To determine why your lock is beeping abnormally, please follow these steps:
  1. Take out batteries and unplug powerstrip.
  2. Let it sit for 1 minute, then put the batteries back in and wait another minute.
  3. If it does not beep, the keypad needs to be replaced (17733-1).
  4. If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).

Feb 10, 2011 | Weiser Lock Powerbolt 1000 Lock

2 Answers

Kiddie fire alarm model I12060, beeps once every


This happened to me, my smoke detector started chipping so I changed the batteries. A few seconds later it started chirping again. The answer is in the way you put the batteries in. The smoke detector allows you to put the batteries in wrong and makes a slight connector. This slight connector tricks the detector into thinking the batteries are weak. Simply turn the batteries around so the fat connector of the battery touches the skinny connector of the device. Mine was, fat side on the right.

Jan 28, 2010 | Kidde i12040 Hardwire Smoke Alarm with...

3 Answers

After many years of use, all of a sudden it starts beeping continously for about 20-30 seconds, then stops for a little bit then starts again. I had to remove the batteries to get it to stop. I tried...


Hi,
It sounds to me as if you are getting the three wrong entries alarm. Why I don't know. Try reprogramming to a different code and see if that helps. I'm including a Link to Weiser PDF Manual to do this , just in case.
CLICK BELOW
http://www.weiserlock.com/PDFs/install_sheets/pb_eng_install.pdf

Hope this Helps,
RSMITH972278
P.S. CONTACT ME IF YOU NEED TO
P.P.S PLEASE RATE ME !

Oct 17, 2009 | Weiser Lock Powerbolt 1000 Lock

1 Answer

Random beeps


  • Take out batteries and unplug powerstrip.
  • Let it sit for 1 minute, then put the batteries back in and wait another minute.
I contacted customer support... they tell me the FAQ information on their own website is incorrect. The opposite is true, therefore the following is correct:
  • If it does not beep, the powerboard needs to be replaced
  • If the unit continues to beep, the keypad needs to be replaced
Here in Canada, they will send you a new one within 3-5 days free of charge. Call customer support:

Canada: 800-501-9471
US: 800-677-LOCK

-=dån=-

Jun 22, 2009 | Weiser Lock Powerbolt 1000 Lock

2 Answers

Powerbolt 1000 started beeping and quit functioning


  • Take out batteries and unplug powerstrip.
  • Let it sit for 1 minute, then put the batteries back in and wait another minute.
I contacted customer support... they tell me the FAQ information on their own website is incorrect. The opposite is true, therefore the following is correct:
  • If it does not beep, the powerboard needs to be replaced
  • If the unit continues to beep, the keypad needs to be replaced
Here in Canada, they will send you a new one within 3-5 days free of charge. Call customer support:

Canada: 800-501-9471
US: 800-677-LOCK


The woman was very friendly. Great customer support!

-=dån=-

Jun 14, 2009 | Weiser Lock Powerbolt 1000 Lock

1 Answer

My self cleaning oven door will not open, and keeps beeping and


The F9 code indicates there is a problem with the door lock.

Try disconnecting the power to the range for 10 seconds and reconnecting. Open the oven door and hold the door switch plunger in while you try these things. Put the control into clean for 5 minutes then cancel clean. You must hold the door switch plunger in for the 5 minutes.

Try canceling the clean cycle without putting the control into clean.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question^%$%^@#

Apr 19, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

3 Answers

Saab 93 window not closing fully


1. put key to ON, hold window button down until all the way down, then do same for up, repeat one more time until you hear BEEP. You just calibrated your window. You will need to do this everytime you disconnect your battery.
or...
2. anytime window has power and has automatically gone down, hold the X (window lock button) down while holding up on your window button, again untill you hear BEEP. not sure what this does, but it fixed the problem for me.

Feb 08, 2009 | 2004 Saab 9-3

4 Answers

Kyocera lingo..5 minute beep..help


My Kyocera phone has been beeping every 5 minutes for several days. The only way I could make it stop was to turn my phone to silent, but then I missed all my calls and texts. I finally called my carrier and they told me how to fix it. I had to take the battery out while the phone was turned ON. After removing the battery, I had to hold the send button down for 15-20 seconds (while the battery was still out), then replace the battery and turn the phone back on. This apparently resets the phone. I waited 30 minutes before posting this solution, and the phone has not beeped again!!!

Mar 06, 2008 | Cell Phones

Not finding what you are looking for?
Weiser Lock POWERBOLT ELEC DEADBOLT Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Weiser Lock Locks & Locksmithing Experts

Azam Ali

Level 1 Expert

31 Answers

Scoee Scoffer

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...