Question about Dell TrueMobile 2300 Wireless Broadband Router (TM23001)
No, but resetting the router back to the factory default will affect the wireless settings.
Posted on Nov 17, 2010
Should not effect hard wired desktop
Posted on Nov 17, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
To load the Dell TrueMobile 2300 Wireless Broadband Router's default settings, hold down the reset button on the router for at least five seconds. While the unit resets, the Power light blinks.
Jan 06, 2013 | Dell TrueMobile 2300 Wireless Broadband...
If you have an existing network, chances are you have already
configured network services on the network. In this case, you would use
the router as a pure Access Point to extend the range of your network by
allowing more attachment of wireless and wired computers. You MUST
also turn off the DHCP server on the router if there is a DHCP server running to
avoid IP address conflict.
To configure the router as an Access Point with the
DHCP server disabled:
Click the Basic Settings tab on the top navigation bar.
Select Access Point Mode.
Click the Next button.
Click OK to dismiss the DHCP disabled message
box (The DHCP server will be disabled in Access Point Mode by default).
Advanced Settings tab on the top
Click the Advanced IP Settings tab on the
left navigation bar.
Assign an IP address to the Wireless Broadband Router.
NOTE: The IP address should be reserved by the DHCP server. The Wireless Broadband Router cannot act as a DHCP client, therefore, it needs a static IP address for its LAN interface.
Save & Restart button.
Note the status bar at the bottom of the screen.
While the Wireless Broadband Router resets, the Power
light on the front of the
When your web browser returns to the main page of the
Wireless Broadband Route, the device has successfully restarted with the new
NOTE: The main page may not return if you have changed IP address of the router in Step 8. To view the main page, type the new IP address of the router in the web browser to access it.
Plug an Ethernet cable from the existing local
network into any LAN
port on the Wireless Broadband Router.
Jul 01, 2011 | Dell TrueMobile 2300 Wireless Router...
Mar 12, 2010 | Dell TrueMobile 2300 Wireless Broadband...
Mar 06, 2010 | Dell TrueMobile 2300 Wireless Broadband...
Jan 05, 2010 | Dell TrueMobile 2300 Wireless Broadband...
Aug 11, 2009 | Dell TrueMobile 2300 Wireless Broadband...
Jan 19, 2009 | Dell TrueMobile 2300 Wireless Broadband...
Dec 28, 2008 | Dell TrueMobile 2300 Wireless Broadband...
Mar 24, 2007 | Dell TrueMobile 2300 Wireless Broadband...
Nov 15, 2006 | Dell TrueMobile 2300 Wireless Broadband...
Dec 08, 2017 | Dell TrueMobile 2300 Wireless Broadband...
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: