Question about Frigidaire FGF316 Gas Kitchen Range
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you may need a new gas valve....but i think you should replace the ignitor first. the gasvalve won't open unless the ignitor pulls a certain amp draw to keep it open, since yours is just opening when you hit it, and closing when you hit it again, i believe it is the ignitor
Posted on Jan 03, 2009
This might be grit or ash that might have found it's into the burner. When the gas flows into the burner has enough velocity to pick up and carry small debris to the inside of the openings in the burner. When you tap it the debris falls from the holes and gas can flow again. If you are on propane, it is common to have grit in the lines. Natural is less likely to have grit unless you have had construction nearby. Finally, does this system use a flame sense probe? If yes the sense probe might also be dirty and need to be wiped with steel wool (soap free)
Posted on Sep 19, 2009
SOURCE: Oven will not light.
you may have a weak ignitor. it is exactly what you are describing for troubles. just replace the bake ignitor and see if that gets you to have heat from the bake burner.
very common problem.
Posted on Jan 12, 2010
Tips for a great answer:
May 18, 2015 | Kitchen Ranges
Mar 21, 2012 | Baxter BXA2G Stainless Steel Gas Single...
Jul 03, 2010 | Tappan TGF657 Gas Kitchen Range
Apr 03, 2010 | Maytag MGS5870 Gas Kitchen Range
Dec 18, 2009 | Frigidaire PLGS389EC Stainless Steel Gas...
Sep 19, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Aug 05, 2009 | Magic Chef CGR3725 Gas Kitchen Range
Jun 02, 2008 | Kenmore 30464 / 30465 / 30469 Gas Single...
May 26, 2008 | Magic Chef 31100 Gas Kitchen Range
May 21, 2013 | Frigidaire FGF316 Gas Kitchen Range
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: