Question about Washing Machines
Error code e20 means a clogged drain pump. This might have happened due to small clips, pins, coins, etc being stuck in the pump. Please note that error e20 can also occur when the drain pump is not pumping fast enough or when the pump fails. To fix the issue you'll need to check the drain pump.
Remove the 2 screws from the bottom of the front access panel, it will come off. Now check for the pump on the right side and remove hoses from it. Remove pump from machine then remove whatever is there in the pump. Hope this helps... Please post back for any further assistance.
Posted on Nov 27, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Hello Diane Snow, thank you for your inquiry!
I understand that your Frigidaire washer is displaying "E20" error code. The "E20" error code means water is not pumping out fast enough. First, you want to check the hoses for restrictions.
If the hoses are not restricted it could be an issue with the drain pump or control board. I would suggest seeking assistance from a professional technician for proper repair. I hope this is helpful. -Matt
Oct 06, 2014 | Frigidaire Washing Machines
Nov 01, 2013 | Washing Machines
Nov 29, 2012 | Frigidaire ATF6000ES Front Load Washer
Aug 20, 2011 | Washing Machines
Apr 29, 2010 | Frigidaire ATF6000ES Front Load Washer
Jun 06, 2009 | Zanussi ZWD1470W Front Load Washer / Dryer
May 29, 2009 | 1997 Buick.5 Regal
Sep 26, 2006 | Zanussi ZWF1430W Front Load Washer
411 people viewed this question
Usually answered in minutes!