Question about Hitachi DZ-MV750 DVD Camcorder

1 Answer

How can I view videos recorded on camcorder on pc? What cable should I use? What software should I install on pc to enable this function? Editing can be done once it is on pc with this software? Where can I download for free this software? Can I convert it to wmv without loosing its video quality? If video quality is affected, what file should it be saved,Flv? My intention is to zip and encrypt it later so that it cannot be viewed by unauthorized party. Appreciate if you could answer my queries. tq. Richard

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Passionate:

    Visited the website for 10 consecutive days.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 140 Answers

To view on a pc you can use a usb cable.
the free software available now, is rubbish. if you have an older pc with movie maker, that's the best option. or you can go for a free trial.
https://www.techsmith.com/camtasia.html
any loss of quality, you probably won't notice.

Posted on May 19, 2017

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: How do I upload my raw-video from my Hitachi BX35A mini DVD-RW camcorder to my pc for editing?

Hi
I think I had a similar problem with my new Panasonic DVD camcorder. Even though I had finalised the RAM disc the PC could not read the disc but could see it. I tried drag & drop into a new folder on my PC. I then renamed the video files by changing the ending to .VOB.
I could then open & play these files in Power DVD. Using software downloaded from the internet I converted the VOB files into AVI and could then use PINNACLE to edit them into a holiday movie/DVD. Some software will enable editing/reading of VOB fileswithout converting to AVI but as I am familiar with PINNACLE I just stick with what I know! Bit laborious but it worked for me.
I still prefer my mini dv camcorder - firewire works perfectly & direct into PINNACLE software for editring..
Hope it works for you
Dave

Posted on Jan 06, 2008

Anonymous

SOURCE: Cant open/view DVD-R videos on my PC

i'm havind the same problem, i want to watch little man :(

Posted on Jun 04, 2008

Anonymous

  • 1 Answer

SOURCE: Imagemixer3

Hi Hope you guys checked, there is an update for this imagemixer3 software on the panasonic site. Try to update with this patch may be your problems get resolved.

Regards
Raja Rapakia

Posted on Jun 27, 2008

Anonymous

  • 1 Answer

SOURCE: ImageMixer 3 SE for SD. Create Disc, Save Files to

They are greyed out when the camcorder is not plugged into the computer, and a power outlet. Try that.

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have a JVC GR-D750AA digital video camera. I do not know how to download the things recorded to my PC. I have also bought the USB cable n tried but the camera USB port is not recogned by the PC. I do...


Turn the power switch on your camcorder to "Off." Connect the USB cable that came with the camcorder to the USB port on the camcorder. If you are using the DV cable, connect one end of the cable to the computer first. Put the other end of the USB cable into the USB port on your computer. If you are using the DV cable, connect it to the camcorder. Power on your camcorder. Wait while your computer recognizes the attached JVC GR-D270U camcorder. Typically you will get a pop-up on your screen asking how you want to proceed once the camcorder has been recognized. Open your video editing software, such as Adobe Premiere, Roxie, iMovie or Windows Movie Maker. Import, or capture, the video from the camcorder to your computer using the video editing software. For example, in iMovie you click on "File," then "Import from Camera" to download the movie from your camcorder to the computer.

Jan 13, 2018 | JVC GR-D275 Mini DV Digital Camcorder

1 Answer

I need to transfer the videos recorded on the camcorder (JVC GR-DVL120U) to my PC (DELL DIM 3000). How can I do that?


You need to get a firewire card for your computer in order to use the DV cable connection on the camcorder. Once inserted Windows will immediately install it and usually without drivers. You will also need the correct DV to Firewire cable which are pretty cheap and easy to obtain.

You then need some video editing software, though you may find Microsoft's Movie Maker that comes with Windows too basic. Do a quick google search for "video editing software" and you will find some software that is easy to use. I know Cyberlink PowerDirector had favourable ratings on the review and comparison sites last time I checked.

Jul 25, 2011 | JVC GR-D201U Mini DV Digital Camcorder

1 Answer

I have DCR-HC 36E and as the PMB given as an alternative for Windows 7 comes with an ilink connection which is not there i n my computer. is there any USB driver for this camcorder.


Hi,


This solution is only applicable for the selected camcorder models. You can follow the steps mentioned below for the DCRHC36 models.


  • Turn on the computer.
  • On the computer, install the USB driver from the CD-ROM supplied with the camcorder.

Only the USB driver included on the supplied CD-ROM will properly enable the camcorder for USB streaming. The USB Streaming Driver can only be installed from the supplied Software CD.

  • Turn the camcorder on to the PLAY/EDIT mode.
  • Turn on the USB streaming feature in the camcorder menu. P-MENUPICT.APPLI.MenuUSB SELECTSTREAM
  • Connect the USB cable to the camcorder.
  • Connect the other end of the USB cable to the computer.
  • Cue the video to the beginning of the video footage to be transferred.
  • Start the video capture software on the computer. You can try Software like Windows Movie Maker

o NOTE: The computer must have compatible video capture software to complete this procedure. Many video editing software applications include a capture function. If you have video editing software, you might not need a separate video capture application.

  • Begin playing the recorded video in the camcorder.
  • Begin importing the recorded video with the capture software.

Good Luck

FixYa

Nov 19, 2010 | Sony Handycam DCR-HC36 Mini DV Digital...

2 Answers

How do I transfer the footage I recorded to PC?


The USB cable is only to download still images recorded on the memory card, using the software that came with the camera. To download video, you need to connect to a computer with a Firewire cable, and have video editing software on your computer to communicate with the camera.

Mar 06, 2010 | Canon DM-XM2 Mini DV Digital Camcorder

1 Answer

Trying to transfer camcorder video to computer.


To transfer camcorder video to computer, you need the following:-
1. Firewire cable (it looks similar to the USB cable, but has very high speed capability)
2. Appropriate software/application.
If a firewire cable did not come with your camcorder then see that purchase one right away, ‘cause you will always need it for this purpose. Then you should have a video editing software like Adobe Premiere or Ulead installed on your system. Adobe Premiere is recommended for its speed.
Once you have these in place, all you need do is connect the camcorder to your computer via firewire, have your video editing application/program open, and simply playback. You will observe that the playback on the camcorder is at the same time being shown on the computer screen within the application. While the mini DV tape is playing back click on capture on the video editing application you are doing the playback from, i.e. Adobe Premiere, Ulead etc.

Sep 03, 2009 | Sony Handycam DCR-HC32 Mini DV Digital...

1 Answer

ZR85


Hi! If you go to the Canon, they have a trouble shooting section. I copied and pasted some information below. Good luck!
Details Print Friendly Version Issue: How do I transfer video tape recordings to a computer via Firewire?
Solution: Transferring video recordings to a computer ZR80, ZR85, and ZR90

Transferring Video Recordings to a Computer You can transfer recordings to a computer using the IEEE1394 (DV) terminal. With the ZR85 and ZR90 transferring video recordings via USB is not possible.
Before starting the video transferring, make sure to prepare the following:
  • A computer equipped with a IEEE1394 (DV) terminal or a IEEE1394 (DV) capturing board (the IEEE1394 protocol is frequently also called "Firewire" or "iLink").
  • A DV cable (sold separately)
  • Video Editing Software
You can use (1) the video editing software that came bundled with your computer or video capturing board, (2) the video editing software included with your operating system ("Windows Movie Maker" with Windows Vista Home Premium, Windows Vista Ultimate, Windows XP and Windows ME, "iMovie" with Mac OS 9 and later), or (3) video editing software purchased separately, with features ranging from very basic to very sophisticated.
  • The appropriate driver
A driver is included with Windows operating systems later than Windows 98 Second Edition and Mac operating systems later than Mac OS 9. The driver is installed automatically when you connect the camcorder to the computer. No additional driver is necessary or available.
  1. Start your computer.
    (If this is the first time you are connecting the camcorder to your Windows based computer your computer will display the "New Hardware Found" message while the driver is installed automatically.)
  2. Set the camcorder to playbackicon.gif mode.
  3. Connect the camcorder to the computer with the DV cable as shown below. Once the camcorder and computer are connected together the camcorder will display "DV IN" on the LCD/viewfinder. This message confirms that the camcorder is ready to receive or transfer video.
  4. Refer to the instructions for your video editing software to download your video from the camcorder.
    Note: Because procedures for digital editing software applications vary greatly, Canon cannot offer any additional support or suggestions regarding downloading and editing your video. Please refer to the software publisher or your computer manufacturer (if the software came with your computer) for assistance in using the software.
zr80dvjack.gif dv_jack_connect.gif caution.gif
  • Operation may not work correctly depending on the software and the specifications/settings of your computer.
  • If the computer freezes while you have connected the camcorder, disconnect and reconnect the DV cable. If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them.
  • Before connecting the camcorder to the computer using a DV cable, make sure that camcorder and computer are not connected with a USB cable, and that no other 1394 device is connected to the computer.
note.gif
  • We recommend powering the camcorder from a household power source while it is connected to the computer.
  • Refer also to the instruction manual of the computer.
  • The programs ZoomBrowser EX and Image Browser included with the supplied CD-ROM are intended for use only with images recorded on the memory card.
  • Video recordings on the tape cannot be transferred to the computer using the software included with the supplied CD-ROM.

Nov 07, 2008 | Video Cameras

8 Answers

JVC Everio GZ-MG145 backup on mac - files are .mod


The software iVerio might help you. It transfers and converts automatically all your videos from your HDD camcorder.

Have a look on the site http://www.convertmod.com

Feb 21, 2008 | JVC Everio G Camcorder

2 Answers

Video problems


If your camcorder is a digital version, you should have a 1394 iLink Firewire cable which is needed to connect your camcorder to your PC. A Firewire is a higher transfer rate connection than USB 1.0 (but slower than USB 2.0), and it is intended for applications such as video editing. Some camers, e.g., Sony, require a Firewire connection to exploit certain features of a digital camcorder and editing software, and it's best to use one. If you do need the Firewire but your computer doesn't have a 1394 Firewire port built in, you can purchase a PCI card version for around $50 and install it separately very easily.

And if your computer doesn't have the 1394 port, but does have a USB 2.0 connector (all newer computers now do), then you can connect your camcorder to your PC via the USB 2.0 (note: NOT a USB 1.0!) to begin capturing video. If you're still having trouble, make sure you go to your camcorder manufacturer's website to download any relevant drivers then retry your connection. If your computer Finds New Hardware sucessfully, you're in. Good luck!

Feb 15, 2008 | Video Cameras

2 Answers

How to transfer videos on JVC Everio GZ-MG21U camcorder to DVD


always check for new firmware and download it and load it to your cam. may sure also tthat the file type can ber supported @ your cam.

Jan 25, 2008 | JVC Everio GZ-MG21 Camcorder

1 Answer

DV-PC recorder


DV-PC Recorder is a Windows XP only application that enables you to record images and sound on the tape in the camcorder and on the computer's hard disk by connecting a camcorder equipped with the DV CONTROL function to a computer using an IEEE1394 (DV) cable. DV-PC Recorder has the following features. 1. You can record movies simultaneously on your computer's hard disk and on the tape by pressing the start/stop button on the camcorder. 2. It enables long, continuous recordings, which you cannot achieve with the tape alone. (Approximately four and a half hour's worth of recording will fit on a 60GB hard disk.) 3. You can start editing the movies on the computer right after recording, as the images and sound are saved on the computer's hard disk. (Optional editing software is required to edit movies) 4. You can record movies on the tape in the camcorder and on the computer's hard disk by controlling the DV-PC Recorder from your computer.

Sep 04, 2005 | Canon XL2 Mini DV Digital Camcorder

Not finding what you are looking for?
Hitachi DZ-MV750 DVD Camcorder Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Video Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Al Rush

Level 2 Expert

270 Answers

Are you a Hitachi Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...