Question about Nortel 2526T-PWR Ethernet Routing Switch with PoE - 24 x 10/100Base-TX LAN, 2 x 1000Base-T Uplink, 2...

1 Answer

How to config ip to nortel switch - Nortel 2526T-PWR Ethernet Routing Switch with PoE - 24 x 10/100Base-TX LAN, 2 x 1000Base-T Uplink, 2...

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

On the Nortel Passport sw

vlan x
ip address x.x.x.x
ip address netmask x.x.x.x
on the interface

ip address x.x.x.x
ip address netmask x.x.x.x
on the Baystack

it smilar to the cisco sw

pls try and tell me

Posted on Feb 24, 2011

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: IP IOS Command not working with switch

you want to give IPs to your VLANs and also make physical interfaces members of a VLAN instead of giving IPs to physical interfaces

Posted on Mar 06, 2009

Anonymous

  • 82 Answers

SOURCE: how to configure STACK IP on nortel 2526t IN USE

for the answer to the query log on to the web site http://nortel.com/

Posted on Feb 10, 2010

Alex93Serbia

Aleksandar Adzic

  • 209 Answers

SOURCE: Hi Team We replaced our existing

As you described it there shouldnt be any problems with your configuration, there should be auto ip conf. enabled so VoIP phones should accept 1st IP range automatically. If that doesnt help contact your operators. Thats all. Good luck!

Please rate my solution! :)
Aleksandar Adzic

Posted on Aug 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I want to factory reset my nortel AP 7220, how do I reset? What would be default IP after reset?


There is probably a reset button somewhere on the device, it is probably a small pinhole that you put a paper-clip into the reset.
If it has its own http web page, there is likely a reset to factory defualts option.

The ip of the computer connecting to it should not change.
On a computer connected to it, open cmd start>run then type in cmd, and type 'ipconfig'.
It will display details about your connection. Where it says 'default gateway' is the ip of the device.
You could try to put the ip in your browser and see if the device has a web page.

May 02, 2011 | Nortel Networks 7220 (NTE350BG) 802.11...

1 Answer

How to Assign an IP address in Nortel 1648T switches


Add a computer to your network, and install Microsoft Windows Server on that computer, and enable its "DHCP-server" component. Then, this computer will supply IP-addresses for all the other computers connected to your switch.

The switch is _NOT_ a DHCP-server; therefore, you need to add a DHCP-server.

Dec 10, 2010 | NorStar Nortel PASSPORT 1648T ROUTING...

1 Answer

Confi stack on nortel switch 2526


Hi friend i want help can you give me the reply. i have 4 nortel 2550T-24 port switch but i don't know how to active stack config.

Sep 27, 2010 | Nortel 2526T-PWR Ethernet Routing Switch...

1 Answer

I want show commands of nortel 1612g switch


Show config is used to check the configuration of running config!!!

Sep 04, 2010 | Nortel Passport 1612G Ethernet Switch

1 Answer

How do i program ip 2033 on nortel system


when you plug it in, and the Nortel logo appears on the screen, swipe the three buttons that are under the display, with your finger, and that will get you into programming.
you will select following
Manual DHCP config? yes
Partial? yes
enter the IP address of your system
for port #: enter: 7000
retries: enter 5
for the rest of the programming select "0" till the end

Aug 23, 2010 | Nortel Networks IP 2033 Audio Conference

1 Answer

Hi Team We replaced our existing Nortel Switches with Nortel 2550T 48 Port Switches and since then our VoIP phones are not getting IP from DHCP. Putting static IP is working. Can you please guide me...


As you described it there shouldnt be any problems with your configuration, there should be auto ip conf. enabled so VoIP phones should accept 1st IP range automatically. If that doesnt help contact your operators. Thats all. Good luck!

Please rate my solution! :)
Aleksandar Adzic

Aug 23, 2010 | Nortel 2550T 48-Port Ethernet Switch...

1 Answer

I have nortel bes 1010 switch what is default ip for it?


WHAT IS THE DEFAULT IP ADDRESS OF NORTEL BES 1010-24T

Jul 02, 2010 | Computers & Internet

Not finding what you are looking for?
Nortel 2526T-PWR Ethernet Routing Switch with PoE - 24 x 10/100Base-TX LAN, 2 x 1000Base-T Uplink, 2... Logo

Related Topics:

1,070 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Computers & Internet Experts

Vuk B

Level 3 Expert

717 Answers

ray gallant
ray gallant

Level 3 Expert

65372 Answers

Scott Fryer

Level 2 Expert

106 Answers

Are you a Nortel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...