Question about Hobart HL200C Mixer

1 Answer

I need a wiring schematic for a Hobart A-200T mixer. when I got it the switch was gone and all the wires in a ball unhooked.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 285 Answers

Here is the complete manual of parts with exploded views and part numbers:
http://www.wasserstrom.com/wcsstore/ExtendedSitesCatalogAssetStore/Attachment/item%20680610.pdf

Good luck and thank you for using FixYa! We would sure appreciate a 4 "thumbs-up" rating for this FREE answer. Happy holidays!

Posted on Dec 05, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i test the stator, this one has 4 wires 2 going to the little stator strands the other 2 going to the larger stator strands, i get audible continuity when one lead is grounded and the other tou


Contact Hobart for a schematic and manual if you lack one. While on line, ask a technician why it gets hot as this is a sign of a bigger problem.

Mar 25, 2014 | Hobart A200 Stand Mixer

3 Answers

Hobart A 200 Mixer


There are four possibilities to look at here. Assuming your mixer has a normal capacitor start motor (older a200's used a different style motor), possibilities are, in order of likelihood:

Motor start capacitor
Start switch (electronic or mechanical)
Burned wiring
Motor start winding

The start capacitor is located at the rear of the mixer. Remove the rear cover (4 screws) and pull the cover towards you. Disconnect one wire from the capacitor and test with any multimeter.

The start switch, if electronic, is able to be tested, but not very easily. Once you've eliminated the other possibilities, it's time to replace the (electronic) start switch. If the motor has a mechanical start switch, it's easy to test: Remove the two wires at the rear of the motor and test for continuity with the motor stationary. A multimeter should show near zero ohms for a good mechanical start switch.

Burned wiring should be easy to spot with some careful inspection around the motor, capacitor, and start switch.

Start winding: Look closely at the stator (stationary part of the motor). If some of the copper windings look significantly darker in color than the others, it's likely the start windings were overheated (the start windings are the thinner copper wires - if you look closely, approximately half of the wires are thinner than the other half). Look for a wiring diagram behind the power switch and determine which wires leading to the start switch and/or capacitor are for the start windings and test for continuity across the start winding. You should read a fairly small value such as 5 - 15 ohms. Values significantly outside this range could indicate a partially open or partially shorted start winding.

Jun 09, 2010 | Hobart A200 Stand Mixer

1 Answer

Hobart m-802 mixer won't start up


call Hobart for the correct oil any way and an elcetrican will just add more problems for yoy

May 30, 2009 | Hobart A200 Stand Mixer

1 Answer

Hobart mixer model D 330 with 3 wires disconnected


Hobart mixer model D 330

You can go to the www.hobartcorp.com website and register to download a parts manual.
You may be able to get the wire attachments from that.
Click on the operator and service manuals link. You will have to register.

May 07, 2009 | Hobart D300-6036 Mixer

1 Answer

The ball turns in opposite direction.


You have a 3 phase unit, it can run opposite direction if the main feed wires are not correct for the motor wiring. If you simply swap any two of the main electrical feed wires it will run in the opposite direction. This should correct your problem now. Enjoy.

Dec 29, 2008 | Hobart D300-6036 Mixer

1 Answer

95 year old hobart mixer: two pole single throw switch


Im a tech for hobart and have seen old mixers but not that old.Hobart wont have parts but you could goto an electrical supply place,take the switch and ask them for something universal.

Dec 16, 2008 | Hobart HL600 Legacy Stand Mixer

2 Answers

Hobart L-800 Mixer is rotating in the wrong direction


Doesnt matter,just switch any 2 power wires.

Aug 29, 2008 | Hobart D340-6007 Mixer

4 Answers

NEED A WIRING DIAGRAM FOR A A200 HOBART MIXER


I had a look on google and came up with a service manual. not sure if this has the wiring diagram but the only other thing i can suggest is to contact te manufacturer direct. Go to http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem
hope this helps.

Feb 02, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart HL200C Mixer Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...