Question about Ray-Ban RB 3360 Sunglasses

1 Answer

The plastic ends on the shades' handles have comes off due to the heat in dubai. Are there any better ones I can purchase which are heat resistant and strong?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

it must be really hot out there :) ok try these brands other than ray ban these asre best in market

Carrera sunglasses

If you are satisfied with my answer please vote three thumbs up.Thank you

Posted on Dec 06, 2010

Testimonial: "thanks.. very helpful"


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where could i purchase the handle casing of the microphone part?

if you can come to Dubai U.A.E, it is available at "Al Dees Camera Repair Center".

Nov 23, 2015 | Panasonic AG-DVC62 Mini DV Digital...

1 Answer

Does anyone repair multimeters?

junk it as the parts would not be available
new ones are now better equipped to handle what you did and the cost of a good unit from places like Jaycar start around $40.00 up
these measure capacitance, resistance , voltage ac/dc, show polarity of the current, test diodes ,measure up to 10 amps current, and a host of other functions including range settings for all readings all of which come in handy for a shade tree mechanic

Oct 14, 2015 | Measuring Tools & Sensors

1 Answer

Where can I purchase a complete handle for my Tower pressure cooker Model4306 Part no 1959376BS, it seems to be obsolete now

Hi there, I believe you can buy pressure cooker components on line. I am in the UK and have purchased spares for two prestige pressure cookers. I think tower parts may be available to online

Good Luck

Jun 08, 2015 | Crock Pots & Slow Cookers

1 Answer

Cant remember how to refit the sun shade


The sun canopy has a length of elastic at either end with a turn-over that is stitched in place. These lengths of elastic need to be pushed past a nub of plastic inside the sunshade rim around where the handle of the carseat is joined. Pull them past the nub of plastic and release, and the turn-over will prevent it popping past the nub. Tuck in the sunshade around the rim.

Oct 18, 2012 | Maxi-Cosi CabrioFix (Black Reflection)...

1 Answer

Moen Single Handle Shower Faucet-turn on get cold, little hot

You can try to rotate the first plastic ring to the left of center a few teeth, this will let the handle advance alittle more to the hot side.

Oct 09, 2009 | Moen 3175 Legend One Handle Shower Faucet...

1 Answer

Power goes on and off.

It could be three different things- or one or more of these three, but more than likely just one.
1- a bad cord or plug end
2- a bad switch
3- a motor brush is losing contact due to poor pressure due to the carbon brush being worn- of the two motor brushes, their length is normally sufficient to last for years with trouble free service. However, if a vacuum is neglected, as in the filters never cleaned or replaced ( use 10/ $2.99 electrostatic register vent filters from any home store's furnace filter section. Cut to fit, and in the case of the Hepa filters, if you have a dusty family you'll go broke changing these so just cut your electrostatic ones and maybe stack a layer or two, but since they are cheap be liberal and change often). What happens with dirty neglected vacuums is they overheat causing the motor brushes to glaze the copper commutator they ride on and eventually wear out the carbon. The added brush dust cakes up and acts as an abrasive.
Alright, so it's not an issue of neglect or jerked on cords? Well, unfortunately several manufactures have lately installed somewhat inferior switches on their vacuums by way of saving a few cents in manufacturing costs. The amperage ratings on the switches are rated just above the typical 12 amp motor ratings on the vacs motor. In real world use though the strains of suction resistance and cord resistance caused by ultra thin copper wire in the cord add up to extra heat at the switches terminals. The plastic in the switch will get very hot as you vacuum and when you flip the switch off each time you finish vacuuming it literally shifts the switching contacts into positions a little more distorted from their original setting. Arcing is the next thing that happens and then its a heated plug end.
That's the story of how a vacuum cleaner works when it's stressed and strained. Ironically when all of this goes on the bearings also overheat due to the arcing motor brushes. And because the belt for the roller is on this motor as well, when you shut the vac off the belt will heat up and even melt slightly. Then when you go to vacuum again the belt will vibrate causing more damage...
This is why bag vacuums are better.
Better yet, get a Rainbow D4 and ALWAYS ALWAYS ALWAYS spin the separator by hand to assure the brushes are not sticking before powering it up. The D4 is the best vacuum ever made. The Eureka Vibragroomer is the best upright ever made.

Oct 07, 2009 | Vacuums

2 Answers

Size 0 maxi-cosi sun shade

The sun shade is already on the car seat! It comes with it! When I recieved my car seat I thought it was missing this part. It is actually pushed in behind the plastic ridge at back of car seat!! I found it kind of hard to pull out but it is def there!!!

Apr 06, 2009 | Maxi-Cosi CabrioFix (Black Reflection)...

1 Answer

Removal of "shading film" from car windows.

there is a widow film solution sold at most part stores its good for putting the stuff on and taking it off also use a razor blade and scrape it after spraying it down with solution

Sep 14, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
Ray-Ban RB 3360 Sunglasses Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ray-Ban Clothing Accessories Experts

ray gallant
ray gallant

Level 3 Expert

65348 Answers

Tom Chichester

Level 3 Expert

54841 Answers

Bill Boyd

Level 3 Expert

53755 Answers

Are you a Ray-Ban Clothing Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides