Question about Tasco 750 Monocular Microscope
You will need to focus in on the slide. There should be 2 1" diameter knobs on either side of the stand, and just to the rear. Those knobs control the height of the stage (where you slide sits). Slowly raise or lower while looking into the eyepiece. At some point something should be see, if the microscope is working properly.
Sometimes it is easiest to start with the lowest magnification. On the outside of the objective (little lenses hanging down that can be rotated) there should be some numbers written on them (usually 4, 10, 40). Those numbers reference your magnification. If you multiply that number by the eyepiece (10) magnification, you will get your total magnification, so start out with your 4x. It will give you the largest field of view, so it is great for finding whatever it is that you are looking for on your slide. It is also the easiest one to get focused. The higher you go in magnification, the smaller the field of view, thereby the more difficult it is focus in on your sample.
Posted on Jan 01, 2011
I am in the exact same boat my friend haha, thrift store check, 18-1200 check, no manual check
Posted on Sep 05, 2011
Where can I get an old bushnell microscope manual. It doesn't have any numbers except the magnification ones
Posted on Mar 21, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 09, 2011 | Bushnell Deep Space 78-9003 (525 x 76mm)...
Oct 10, 2010 | Bushnell Optics
Sep 21, 2010 | Bushnell NorthStar 78-8846 (675 x 114mm)...
Oct 01, 2009 | Bushnell Optics
Jan 10, 2008 | Premiere Microscopes MRJ-01L Microscope
1,064 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: