Question about UPM Indoor Electronic Programmable Plug-In Timer with Front LCD

2 Answers

I have a n older mandolyn (upm.??) AX-801S timer. I have it all programmed. However whereas many timers have ON/AUTO/OFF settings this one only has ON/OFF. Does anyone know which way to set this timer to run the timer programs? Thanks ..Pat

Posted by on

Ad

2 Answers

I do not know that timer.
Many older timers never had online manuals.

Check following 2 links to see if your timer and manual show:
http://waterheatertimer.org/UPM-timers-and-manuals.html
http://waterheatertimer.org/Woods-timers-and-manuals.html#seven

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on Jan 24, 2011

  • Anonymous Feb 05, 2011

    I see you downvoted the free answer instead of adding a comment and giving the fixya community information about your timer that could help others. Which helps nobody. Next step would be to google your model timer and then go to one of those sites that sells the manual spyware. Download the manual spyware and then restore your computer. Afterward, post your manual for free on your website, that you pay for each month, and then send the web address of that manual to me so others can enjoy your generosity for free. Can we count on ya?

  • Anonymous Dec 10, 2018

    Press SET move to CLOCK using the left/right arrow. press SET again the days will flash.Press arrow to get requires day/days. Press SET hour will flash. Press arrow to get hour. SET arrow to get minutes to finish time Using right arrow move to PROGRAM press SET hour will flash.arrow to set on hours and min. for no. 1 setting SET right arrow to go to OFF setting. Repeat time as previous I'm finished 2nd tine is requires press right arrow and repeat as in 1st settings SET when finished If randum on/off requires press RND. Hope this works for you Happy Christmas Tony

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have this timer switch also. It doesn't matter whether you push on/off button. It always runs the scheduled program ie. it automatically triggers the scheduled program at the time you have setup. This device has also the ability to setup ON or OFF at a specific time without being forced to select both.

Posted on Oct 13, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model DT 420. I need instruction to program this timer. Dave


UPM DT420 is automatic dusk-to-dawn timer, with options to set run time, and random on-off after dusk.
Open following links to identify timer and download possible manual:
Manual has illustrations.
http://waterheatertimer.org/UPM-timers-and-manuals.html#DT420
http://waterheatertimer.org/pdf/DT420-Manual.pdf

If this is not your timer, or if part of manual is confusing, add a comment with specific detail for possible help.

Aug 15, 2011 | UPM Heavy Duty Outdoor Programmable Timer

1 Answer

Want to know how to set the times "on" "off". Timer is a bit older. Front of the timer has "set' "cd" rnd."


1) Open following links to identify same-similar timer, and download possible manual:
http://waterheatertimer.org/UPM-timers-and-manuals.html#ETW
http://waterheatertimer.org/images/ETW350-buttons-200.jpg

http://waterheatertimer.org/Woods-timers-and-manuals.html
http://waterheatertimer.org/images/Woods-49556-400.jpg

2) If timer does not appear on links above, take in-focus photo and post on flickr, and then add a comment with link to photo so I can see the timer for possible identification.

Aug 08, 2011 | UPM Programmable Wall Switch Timer

1 Answer

Friend left RCT100 timer programmed, it comes on the time programmed, but it goes off much earlier than it is supposed to. How can I correct this?


Most digital timer problems can be solved by resetting timer.
Open following link for possible instruction manual with troubleshoot steps
http://waterheatertimer.org/UPM-timers-and-manuals.html#Garrison

Check the following:
Program disable feature is not enabled.
Check 2 different sets of batteries: 1 set AA for transmitter, and 1 set button-cell batteries on back of timer
Choose between 4 different functions: programmable, photocell, countdown, or random
Using programmable mode: make sure there are no programming conflicts

Jul 20, 2011 | UPM Remote Control Timer Set

1 Answer

How do you set upm model dt 420 electronic timer


Open UPM DT420 manual on following link:
http://waterheatertimer.org/UPM-timers-and-manuals.html#DT420

The manual is longer than allowed for free answer and has important illustrations and options.
Please read the manual in addition to instructions given below.

Copied directly from the manual:
1) Select AUTO using the slide switch
2) Select the desired On-period (2, 4, 6, 8, 10 hours) using the dial switch
3) For continuous Dusk to Dawn operation, Select CONTINUOUS using the dial switch.
Timer turns ON automatically at dusk and turns off according to how you set 1 2 and 3.
If timer does not operate, or if it turns on at odd times, then it is broken.

Note: UPM manuals normally leave out important information, but this particular instruction matches closely with similar products and is probably accurate.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Feb 28, 2011 | UPM Programmable Outdoor Timer

1 Answer

What is the purpose of the countdown timer? Can you program for just 1 program setting for the full week? When setting program time is the manual on/off switch in the on or off position?


You posted under UPM programmable timers
Open following link to identify product and download manual
http://waterheatertimer.org/UPM-timers-and-manuals.html

Q1) Some UPM timers, and other brands, offer countdown feature in addition to regular programming.
So you choose between regular programming and countdown.
Countdown is for a bathroom fan for example.
Push the button and fan turns on for set amount of time.
After countdown is over, fan turns off automatically.

Q2) Yes all days of the week can be selected.
Set event 1 ON for all days.
Set event 1 OFF for all days.
Do not set more events unless you want more on-off events.

Q3) Switch position depends on model number.
Add a comment with model number to identify product and I will look at manual alongside you.
Or try the switch in different positions.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you via e-mail or phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Feb 23, 2011 | UPM Programmable Wall Switch Timer

1 Answer

I am having a problem setting the UPM ETW350 timer, can't seem to have it go off at a certain time. What do I do about the countdown? IS that what I press to go to the time to shut it off?


You posted under UPM 350 programmable timer
http://waterheatertimer.org/UPM-timers-and-manuals.html

Manuals for all UPM timers are missing key explanations, despite the lengthy manual.
I think there are 3 things to look for:
1) Program1 is ON and program2 is OFF and program3 is ON etc.
2) When setting days, be sure that ON and OFF are set for same days so there are no conflicting programs.
3) Timer gives three modes: Countdown and Random and Programming. Countdown is for a bath fan when you want to turn on fan with push of button and have timer turn off fan automatically after the countdown expires. Do not use countdown or random functions when you want timer to perform ordinary on-off functions.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you via e-mail or phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Dec 14, 2010 | UPM Programmable Wall Switch Timer

2 Answers

Noma Timer Model #ET525C - Require Instructions


ET525C is UPM timer
http://waterheatertimer.org/UPM-timers-and-manuals.html

UPM ET525C Manual
http://waterheatertimer.org/pdf/UPM-ET525C-heavy-duty.pdf

Instructions are 14 pages. It is impractical to re-write 14 pages of instructions.
If you have a problem, add a comment and say exactly which programming you want to set, and I will respond.

-Timer can be programmed for ON and OFF times, for Dawn-Dusk, for Countdown, for Daylight countdown, for daylight saving, and for Random. Each different programming option has 8-12 steps shown in manual.

geno_3245_118.jpg

Nov 28, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...

1 Answer

I also am having trouble with this timer. I've got the program set for when I want it to go on but can't figure out how to put in the time I want it to stop. I don't understand where the countdown timer...


ETW350 is programmable timer that offers 3 different timer
functions: Program, countdown and random.
Timer has 20 different settings.
UPM site is not available recently, but UPM timers are still being sold.

Operation manual is not very clear how to program ON and OFF times.
http://waterheatertimer.org/pdf/UPM-etw350.pdf

That being said, usually with programmable timers, you program ON time. And then program OFF time.

I do not own this timer so I can't test ETW350 like I've tested other timers.
I think the way this timer works, is program1 is ON.
And program2 is OFF.
Again, manual is not CLEAR about ON and OFF times.

Following instructions assume timer is wired correctly, timer is set for current time, and you want to set 'timer' function and not 'random' function.
Here's how to set program1.
Press arrow buttons until 1 shows in display. This is program1.
Press Set button.
Select day for program1 ON using arrow keys
Press Set button.
Select hour for program1 ON using arrow keys.
Press Set button.
Select minute for program1 ON using arrow keys.
Press Set button.
Use arrow keys until 2 appears on display. This is program2.
I believe program2 is for OFF times.
Set program2 using same steps above.
Be careful to match ON and OFF days ... for example ON 7pm Monday and OFF 9pm Friday will keep lights on from Mon through FRI.
Conflicts in programming will cause timer not to work. For example program1 ON 7pm Monday, program2 OFF 9pm Monday ... but programs3-4 say opposite times.
Make a schedule of program times before starting to avoid conflicts.
Try steps above and test fire that timer, and then add a comment.

Nov 24, 2010 | UPM Programmable Wall Switch Timer

1 Answer

Do you have a programing manual I can get on line. I have lost the original


UPM website seems to be closed down.
I downloaded manuals some time ago and posted a page
UPM timer manuals:
http://waterheatertimer.org/UPM-timers-and-manuals.html

Nov 23, 2010 | UPM Heavy Duty Outdoor Programmable Timer

Not finding what you are looking for?
UPM Indoor Electronic Programmable Plug-In Timer with Front LCD  Logo

Related Topics:

3,198 people viewed this question

Ask a Question

Usually answered in minutes!

Top UPM Hardware & Accessories Experts

Brad Brown

Level 3 Expert

18110 Answers

Gene Haynes

Level 3 Expert

5390 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Are you an UPM Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...