Question about Asko Dishwashers

2 Answers

The pump on our Asko D3122 goes even when it is turned off, if you add water to the machine it pumps it out but keeps running

Posted by Anonymous on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

The overflow capture plate is flooded. Basically, any overflow falls to the bottom of the unit to protect the floor. There's a foam floater attached to a lever which floats up and triggers a switch sending F2 error. Best to open bottom front skirt and sponge up any water still in the spill sump, or remove back panel to better access the water and sponge it up. F2 error message vanishes once float drops and machine starts working correctly again. Remember to fix cause of flooding, which is usually are blocked sink drain pipe. This blockage causes sink water to flow into the machine instead of down the drain.

Posted on Apr 09, 2015

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

D3122 Asko Dishwasher fault code F2 - how do you stop pump runing and reset?

Posted on Jan 05, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Asko Dishwasher D3122 fills with water and stops


if the heating element has failed the water temperature will not reach the trigering threshold to allow the timer to advance to the next program step good luck !

Dec 26, 2013 | Asko Dishwashers

1 Answer

Dead circulation pump capacitor: I have an Asko


Capacitor should have a uF and voltage rating stamped on it. They are NOT a one-size-fits-all.
Always keep your Owners Manuals so you can use it to get parts. Without seeing it myself, the part will probably have to be replaced.
Sometimes you can find the manufacturer online and get parts through their website.
Possibly find this capacitor at an AC shop.

Oct 29, 2013 | Dishwashers

1 Answer

Asko d1706- drain pump keeps running at the end of the cycle, even in the Off position. Water sometimes remains in the bottom of unit. Any clue


There was a small leak when I re-installed the pump causing water to accumaulate in the base. By reading on your site, I realized that this is normal and expected, for the event that a leak occurs, the pump stays on to purge all possible water.

Thank you

Dec 23, 2009 | Asko D1706 Built-in Dishwasher

1 Answer

ASKO D3122 PUMP STAYS ON AND MACHINE WILL NOT SWITCH ON


The machine has activated a safty seq. There is most likely water on the lower buttom. Leakage or drain pipe blocked. The power will get to the drain pump, when this happends. To prevent overflow on your kitchen floor. Dry out the water. Then it will start as usual.

Jul 25, 2009 | Asko D3122XLSS Stainless Steel Dishwasher

1 Answer

Asko D3122 dishwasher will not fill with water and will not turn off


you may have water under the dishwaher ... have any plumbing work done lately?

if the dishwaher overflows or leaks it will trip a float switch under the dishwasher... as long as it is triped it will run the drain pump.. and not let any water into the tub...

the water will have to be removed and the leak stopped before it will run a cycle....

Hope this helps if not let me know more about your problem..

Mar 20, 2009 | Asko D1876 Dishwasher

1 Answer

ASKO D1986: Water pump running constantly


Solved by draining water from bottom pan.

Jan 18, 2009 | Asko 24 in. D3350 Dishwasher

1 Answer

Asko d/w d3122 Hi gang the overfilling protection has been activated, what can I do to remedy the sitution. regards banger35


Hi,

Have a look to make sure that the pump and drain hose are unblocked. If they are, you might have to call Asko and arrange a service call.

Good luck!

Oct 08, 2008 | Asko Dishwashers

1 Answer

My problem is with a Asko D1996


Remove the panel down on the backside of the machine. Dry ut the water on the bottom pan with a towel or so. Should work like new;)

Jan 27, 2008 | Asko D1776 Stainless Steel Built-in...

4 Answers

Asko 1805 Frozen


Sounds like the controlunit is bad.

Jan 01, 2008 | Asko 24 in. 1805 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

3,213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asko Dishwashers Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

MARLON KELLER

Level 2 Expert

111 Answers

Are you an Asko Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...