Question about NetGear DGN2000 Wireless Router
You Will Have to Disable the Firewall In Your modem / Router
And IF it is a router then Open The Ports
• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53
And Also Make sure that UPnP is Enabled
You will have to open the following ports in your modem /router
Make sure the firewall is disabled in the Modem /Router
Make sure that UPnP is Enabled
Playstation Network Required Ports
Playstation Online Game Ports
Call of Duty 3:
You can use http://whatsmyip.org/ports/ to test if the ports are open.
Posted on Jan 22, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Ok in order to help you resolve this issue I need more information. Is this a newly setup router? Did you setup any type of security? WEP OR WPA these are encryption tools that allow only you to get onto your network.
Posted on Nov 26, 2007
I assume you know the ip adress of your xbox.
First of all check on your router to see if UPNP is enabled.
Then go to Portforwarding/Port triggering.
Then add custom service
service name: the name of how you call it. doesn't matter really
service type is UDP
start port 88
end port 88
server ip is the adress of your xbox
then apply and make another custom service
name it how you want
service type tcp/udp
start port 3074
end port 3074
server ip adress of you xbox
this should work
Posted on Jan 03, 2009
Firstly what you need to do, is go here:
PortForward.com - Free Help Setting up Your Router or Firewall
And choose your router. On the page, look at the first couple of steps. It will tell you to enter an IP address into your browser (ie 192.168.1.1) and then enter the username and password. Do that until you get to your router settings. Stop following that guide afterwards, because it's for port forwarding and not DMZ'ing.
Once you're in the router settings you need to find the "DMZ" page. Have a look through the menus -- it's probably under "Security", "NAT", "Gaming and Applications" or something like that.
You will know you've found it when you simply see a box to enter in an IP, and sometimes a check box saying "Enable". When you find the box, enter 192.168.1.50 into it. That's it, just save if you can.
Easy eh? Not finished just yet though. Now you need to go to your Xbox. Go to the last blade, the settings one, and choose Network Settings. From here choose Edit Settings and choose IP Address. Set it to manual and use these settings:
IP Address: 192.168.1.50
Subnet Mask: 255.255.255.0
Default Gateway: Use the IP address that you typed into your browser to get your router settings up. Normally 192.168.1.1.
Now try to connect. Your NAT should be open. If it isn't, restart both your router and Xbox 360.
I typed this really quickly, so if it's confusing in any parts just let me know. I can post how to port forward too if anyone wants, but DMZ'ing is far more effective and easier.
If your DNS fails then do this:
Go to Start > Run and type "cmd". Then type "ipconfig /all". Take a note of your Primary DNS in there.
Then go to your Xbox, settings, network settings, edit settings, DNS Server, manual and use:
Primary DNS: whatever you took note of from ipconfig /all
Secondary DNS: not needed.
Posted on Feb 04, 2009
Step 1:Connect Modem - Router - Computer (Wired)
Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3:On the Left click firewall
Step 4:Leave the Password blank and click submit
Step 5:Disable it and click apply changes
Step 6:Scan and connect in the Xbox
Step 7: Get the IP Address of the Xbox
Step 8:Open Router Setup in the Computer
Step 9:On the left under Firewall Click DMZ
Step 10:Enable the IP Address of the Xbox in it
Step 11:Click Apply Changes
Step 13:On the left Under Utilities click System settings
Step 14:Scroll down to the bottom
Step 15:Enable UPnP
Step 16:Click apply changes
Step 17:Test the connection ,Check the NAT
If working then let me know
Goto : my blog for more information about belkin routers (Page is still under construction )
If it is still not working
Open Router setup
At the middle Under internet settings check the WAN IP
IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem
Posted on Aug 12, 2010
login to the router and enable uPnP - it should be on the security screen. if you don't have uPnP as an option you will need to use port forwarding rules. These depend on the application reporting the moderate NAT.
Let me know if you need further details on how to get into the router.
Posted on Dec 18, 2010
Tips for a great answer:
May 12, 2015 | Microsoft Xbox One
Jun 11, 2012 | Motorola Computers & Internet
Jan 18, 2011 | Video Game Consoles & Games
Sep 15, 2010 | NetGear WGR614 Wireless Router
Jul 30, 2010 | Computers & Internet
Apr 27, 2010 | Sony Playstation 3 (PS3) Console
Apr 19, 2010 | Linksys WRT160N Wireless Router
Jan 04, 2010 | Dell TrueMobile 2300 Router (000001)
Nov 18, 2009 | Zyxel P660HW-D1 Router
Jul 09, 2009 | Zyxel P660HW-D1 Router
Nov 06, 2019 | Power Computers & Internet
2,005 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: