Question about Dual Car Audio & Video

Open Question

My dual radio(xhdr6435 cd reciever) wont turn on. I had the battery replaced and it worked fine for two days. Then the third day after the battery was replaced the radio would not turn on. It is supposed to light up blue when it is on but all its doing is lighting up red on the power button. Are the wires maybe loose, or does it have something to do with the new battery?

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

BlacKrimson

  • 1 Answer

SOURCE: Dual XHDR6435 CD Receiver was working fine for a

just simply take out the reciever and disconnect the power cord and plug it back in and there you go.

Posted on Oct 04, 2010

Ad

tlouie28

  • 1 Answer

SOURCE: my dual XHDR6435 reciver turn

All I did was take my negative off and put it back on, reset my system and the CD player works again :)

Posted on Dec 14, 2010

jturcotte

Jeffrey Turcotte

  • 8984 Answers

SOURCE: where do i hook the

Hi, the blue wire is used to turn on a separate amplifier or to raise the antenna. If you don't have a telescoping antenna or amplifier, just tape off the blue wire and leave it hanging behind the head unit. Please let me know if you have more questions, and thanks for using FixYa.

Posted on May 06, 2011

Aloke Das

  • 1833 Answers

SOURCE: i have a dual XHDR6435 In-Dash Receiver in my car

Hi,

According to your problem, Sometime this type of Audio player doesn't support all types of audio format. So check that the disk you have burn in your PC are MP3 format. Try to play another original MP3 disk of market. If the supports the original disk then helpless to play burned disk. If all disks get problem to play then you may have to change lens of the player. You can try to clear the lens by a lens cleaner kit. Reset your receiver then reboot it.

Posted on May 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power button is stuck on


  • Try Shutting it down with the remote.
  • CAREFULLY Spray a little bit of WD40 around the button and press it several times to see if will unstuck.
  • Take it back to the store where you purchase the set from for exchange, or to a repair shop.
Here is a link to your receiver operating Manual.
Best of Luck,
JP

Dual XHDR6435 Installation Manual

Jul 14, 2015 | Dual Xhdr6435 Cd Receiver With Bluetooth &...

1 Answer

I installed a DUAL XHDR6435 to my 1991 Ford Explorer XL the radio works fine got sound and cd functions but the display is all out of whack everything that can light up on the display is on the display...


I Would try the reset button on the back off the cd player if there is one...If not shut it off and back on...U may have to tinker with the controls for a bit to get it conform to your liking....

Jan 26, 2014 | Dual Electronics XHDR6435

1 Answer

How to enable bluetooth on a XHDR6435 cd receiver by dual


You must purchase the BTM60 module (as it is Bluetooth ready, not Bluetooth capable) like this one at Amazon http://www.amazon.com/Dual-Bluetooth-Hands-Free-Module-Built-In/dp/B000PDR5O6

Sep 23, 2011 | Dual Electronics XHDR6435

1 Answer

I have a RCI 2950 comes on keyed up and stays keyed untill you turn it off. I have replaced the auto amp, all voltage regulators and the black diode with yellow strip below mic plug with no change. I need...


i have the same radio rci 2950. Ive had the same problem with mine,turns out with mine the processor would lock up,turning the radio off & on repeadly would clear the problem and the radio would work fine x-mit & recieve. the solution to fixing the problem is to replace the memory backup battery this battery works similar to a computer motherboard cmos battery when this battery goes dead all sorts of strange things happen to the radio wont transmit wont recieve or like your problem transmits continiously. the problem with replacing this battery is finding out what year & model your ranger 2950 is. the internet says only first generation ranger 2950s use the battery second genration & third generation do not use the battery. but the internet could be wrong. so i suggest getting a hold of (usa ranger.com) & give them a phone call or email and ask them about the year your radio was made. they may even service it for you or if you are electronic savvy you can do it yourself. the battery is located close to the main cpu on the front panel if yours uses a battery.

Sep 07, 2011 | Ranger Communications RCI-6900F-25 CB...

1 Answer

XHDR6435 radio was working fine yesterday, now it will not turn on. the red led behind the faceplate flashed when i turn on the car, and cds will load and eject but the radio will not power up. i habe...


I just Spoke to tech support. This is what they said:
1. Key in the on position and the red power button lit, remove the face plate.
2. On the left bottom side press and hold the reset button, with a pen, for 10 seconds and let go. The red led on the right should flash.
3. Reinstall the face plate.
4. Push power. The unit should come back on.

Mine worked, and i was about to tear it out and return it. So try this first or even call tech support for Dual 1-866-382-5476.

Jun 14, 2011 | Dual Electronics XHDR6435

1 Answer

Radio won't work on my Dual XD1222


same problem, but if i disconnect unit or car battery systems (resets?) works again for a day or two then problem comes back

Feb 05, 2010 | Dual Car Audio & Video

2 Answers

Plug volkswagen radio


i have a 1998 vr6 and i replaced my radio as well with a wiring harness that only fit two of the factory plugs, the third plug is for the optional cd changer that goes in the trunk, so after about 3 days of trouble shooting i noticed a BLACK wire that went to both remaining plugs, took it out of one plug and spliced it into the other wires that were remaining and it worked, assuming that your radio shows that it has power but no sound, that was my issue, now it works fine, hope this helps

Jan 29, 2010 | Volkswagen PAC C2R-VW Radio Replacement...

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

856 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dual Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Dual Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...