Question about DISH Network 625 Duo DVR Receiver (Remanufactured)

1 Answer

Dish network. Blue screen. Aucun signal. How do I get rid of this and get signal back??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • DISH Network Expert
  • 286 Answers

Hey there! This issue is usually caused by the tv being on the incorrect channel. Depending on what tv you are at, here are some steps to try. At tv2, the tv will need to be on 60 or 73. At tv1, the channel is 3 or 4, and may need to be on an input. Usually video1 or 2, etc... If this does not work, try to unplug the receiver from the power source for about 10 seconds. Hope this helps!

Becki Barned
DISH Network Customer Service

Posted on Jan 14, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have dish network. if I change channels by it's remote the tv goes to a blue screen with "no signal in spanish


that would be a question best addressed by a dish technician. did you contact DISH for service help ?

Mar 25, 2018 | Televison & Video

1 Answer

Dish network Blue screen No "Signal


Hi john harrison!

A blue screen with "No Signal" is usually related to a video problem. The TV may be getting changed off the correct input/channel, or the video cable might be going bad.

If you have a spare, I would recommend a different cable and seeing if that fixes the problem. If it continues, verify the input/channel your TV is on when it receives a picture and if it goes out try putting it back on that input/channel.

If problems still continue I would be happy to review additional options with you. You can reach me here or at thomas.faust@dish.com

Tommy Faust
DISH Social Media Representative

Jun 03, 2012 | DISH Network Televison & Video

1 Answer

Turn off and on, blue screen


Hi, I am sorry you are having a problem with your DISH video. A blue screen means you are on the correct channel or input on your TV. If you turn the Tv off and then back on, ehat channel ot input does it say it is on. You should be on channel 3 if at TV1 or 60 or 73 if at TV2. If the receiver is connected to the TV using the Red/ White/Yellow cables, then the TV needs to be set to a video input. If you any additional assistance, please email me directly. Thank you!

Mary Catherine Brady
DISH Internet Response Team
marycatherine.brady@dish.com
2:45pm-11:15pm (MST) Tuesday-Saturday

Jun 03, 2012 | DISH Network DVR-625 DTV Receiver /...

1 Answer

I have a flat screen and Dish Network for my cable. I switched the "source" to watch a dvd, and when I switched it back to channel 3 I have a blue screen. cable (dish network) is on and working....


It all depends on how your dish cable is connected to your television. The possibilities I can think of would be by composite cables (not HD)--these cables are the yellow red and white combo. It could also be component--the video cables are the blue, green and red. The other possibility is a single HDMI cable which looks like a rectangle and delivers both the video and the sound from the cable source to the T.V. as one cord. Depending on which of these you are using to output the signal from the cable box to the T.V. will determine which "source" you should select when trying to watch tv. Hope this helps!

Aug 25, 2011 | Niko Televison & Video

1 Answer

Vizio TV with Blue Screen says, "Aucun Signal!"


Guys aucun signal just means no signal in french

Mar 01, 2011 | Vizio L37 Television

1 Answer

Will not record from EPG settings but will record on 'live' record ie whilst already watching a program. Tried all usual reboot tricks but to no avail. Please note the forward recording schedule list has...


mikelake735

If you have DISH Network equipment, you can try a check switch test on your receiver so the receiver can update its information from the satellite. With the DISH remote press the Menu button which will display Main Menu on the TV screen.

Press 6 (System Setup), 1 (Installation), and 1(Point Dish). Highlight the CHECK SWITCH button on the upper right of the screen and press the Select button on remote. On the Installation Summary screen, highlight the TEST button at the bottom of screen and press the Select button on the remote. This will initiate the test. Allow the test to complete. Once completed, exit out of each screen till you get Acquiring Satellite Signal on TV screen. After acquisition completion, allow it to download the program guide. If this doesn't fix the problem, you may need a new receiver. I hope this helps.

Ray Calo
DISH Network

Feb 21, 2011 | Televison & Video

1 Answer

Hello- using dish 500 with twin lnbf, 311 receiver. 119 locked in easy with 70 signal . When trying to find 110, I cannot get a strong enough signal to lock. 129 signal shows strong along bottom of point...


Hi CharlieO my name is Mike of DISH Network and I was reading over your post and seenwhere your 110 satellite is not locking in or on your install summary screen. Iwould be more than happy to help with this issue and to research further I willneed to look at the account to look what satellites they have setup on youraccount. I will need your account number or your phone number; I will leave mye-mail so you can contact me directly. Michael.houston@dishnetwork.com

Jan 30, 2011 | RCA DISH Network(r) 311 Satellite System

1 Answer

Just moved my TV to a home with cable. It was hooked up to Dish network. there is no signal. Thank you.


We would be happy to help get your DISH Network signal back.The first thing we want to check is if there is anything blocking the signal toyour satellite dish like tree branches, severe cloud cover, or snow build-up.If it is safe to do so, remove the obstruction or wait for it to pass. If thatis not the case then reset your receiver by unplugging it for 10 seconds thenplugging it back in, the reset may take up to 5 minutes to finish (note: thereceiver's power plug usually has a red tag attached to it). At this point wewant to check the connection between your receiver and the outlet; please visitthis link and select the model receiver you are using to check the wiring ofyour receiver: http://www.dishnetwork.com/SupportSection/setup-receiver-towall.Once you have check the connections perform a check switch test. Press the menubutton, then the numbers 6-1-1 on your DISH remote, this should take you to thepoint dish screen, select check switch on the right, then test on the bottom ofthe screen. Once the test is complete exit the menus and let the receiveracquire the signal (If Error 836 appears, do not save the matrix, cancelit and call our 24/7 customer support number listed below.). After all thesesteps if the receiver is still not getting the signal it should please give usa call on our 24/7 customer service line 1-800-333-DISH (3474) for additionaltroubleshooting.

We hope this gets your signal back. Thanks for choosing DISH Network!


Phillip Chang
DISH Network Customer Service Representative

Nov 12, 2010 | Olevia 742I 42 in. LCD TV

1 Answer

Dish Network "No Signal" Message on Screen..Standby Mode


austinbrooke,

I saw your post and I'm wondering if you are still having problems getting a picture on your TV. Is it TV 1 or TV 2? What type TV is connected? If it's a HD TV, you will need to go through your input or source list on the TV to find your picture on TV 1. TV 2 is generally on either channel 60 or 73. I hope this helps.

Ray Calo
DISH Network

May 31, 2010 | DISH Network 322 DTV Receiver

1 Answer

No signal


Call Dish and ask them is there any firmware you need for your tv....they should provide it for you.

Feb 11, 2009 | Akai LCT2060 Television

Not finding what you are looking for?
DISH Network 625 Duo DVR Receiver (Remanufactured) Logo

914 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Home Security Experts

Brad Brown

Level 3 Expert

18110 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a DISH Network Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...