Question about HP LaserJet 1150 Printer

1 Answer

If I am not printing continuously, the printer does not print the first 5-6 printing jobs. When print job sent to the printer I get a blank page (printing job can be more than one page). After the blank page, GO light is solid while lower orange light is blinking. Manual feed option is off within the driver (I printed a self test/ Configuration page it shows manual feed off). Then I have to Press Go button few times to get the printer ready again. I send another printing job; again I get a blank page with Go button being solid and lower orange light blinking. Then I have to press few times to Go button to get the printer ready. This goes like this 5-7 times. After doing this for 5-7 times, If I send another printing job to the printer, the printer does print the first page of the printing job with toner faded characters (lower half of the page) but its Go button is solid again with lower orange light blinking. Again I press few times to GO button to get the printer ready. Then I send one more printing job, this time the printer does print. After that, I can send as many printing jobs as I want and printer does print without any problems (without interruption between printing jobs). BUT IF I STOP PRINTING FOR FEW MINUTES, I have to start over as described above. Please, Please Help!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 195 Answers

Hi there,
It seems that " Print on both sides (Manually)" is selected in printing options., when you want to print any document Go to file Print > select printer and click properties and disable the Manual printing option in device settings.
You should be able to get printing without errors,
if the option is not checked then check for the default paper tray,
save the settings and reboot your laptop/desktop and restart printer as well so that settings should work properly and any given command gets clear from memory, If these all settings are ok, Uninstall the printer driver and download the latest version drivers from HP website and install see links below
hp LaserJet 1150/1300 printing system hp LaserJet 1150/1300 PCL5e driver

If you require more assistance feel free to reply to this post
Regards, BA

Posted on Jan 14, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cannon D680 prints a blank page after every print or copy job. the pages print fine but at the end it always feeds 1 blank page. what can it be?


See if there is an option in your settings to print a "job owner" page after each job. That's not what it's actually called but I had a similar issue with a Canon printer and found that you can have the printer automatically print a page after the job that identifies who sent the job to the printer. It's the last page so it lands on top of a finished job and separates it from other jobs sent to the printer before you have a chance to get yours. If you don't have network identifications associated with users it may just print a blank page as a separator.

Jan 14, 2015 | Canon imageCLASS D680 Laser Printer

1 Answer

Dell Mono MFP 1125 Rotate Paper


Hello,

check the size of the pages you are printing: if you are printing A4 on letter, as the set page is too small, the printer takes two.

Good luck !

Feb 04, 2018 | Dell 1125 All-In-One Laser Printer

1 Answer

When I print a one page document, tray 1 prints on multiple papers at a time. 1 page prints on 5 pages.


If you don't have a manual, you can find one here

My guess is either on the printer or the driver. Skimming the manual, it doesn't seem that you can set the default number of pages printed per sent print job on the printer, but that is something I would look into. This is a nice office printer, perhaps the printer is set to print multiple copies of everything it is sent. You could determine if it is the printer or driver/computer by printing to it from another computer.

If it is the computer, go into the control panel and select the properties for this printer. In there, check if the number of copies is improperly set to 5. This would happen for every print job sent from this system.

Does it print 5 copies of documents sent from different programs (i.e. Web Page, Word, Excel)? Quite possibly, one time you set it to print 5 copies and that application retained that as default. In that application, rather than clicking "print" click "printer setup" and look through the settings to see if it is requesting multiple copies.

I am 95% sure one of these three solutions will solve your problem.

May 05, 2011 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Hp 4255, if i send five pages, it shut first five blank pages


check your settings in Start->Settings->Printers->HP4255 rightclick ->properties-> preferences.....

Oct 29, 2009 | HP OfficeJet 4255 All-In-One InkJet...

2 Answers

How do I cancel a print job sent to the Ricoh Aficio 2018D? It is no longer in my print queue, but printer is still printing all 480 pages


You may have to go to the printer and click on Status or printer jobs and cancel the job from the printer. It appears the printer has the whole job already spooled in memory

Jul 14, 2009 | Ricoh Aficio 2018D All-In-One Laser...

1 Answer

4100 stops printing mid streem and engins continue to run


Try printing out an error log and seeing if that leads you anywhere.

Nov 25, 2008 | HP LaserJet 4100tn Printer

1 Answer

Xerox Phaser 6100 will not print


Yeah you need to replace that imaging and transfer units for it to print. That has a counter on it and once it comes up with that message it will not print anything.
NOW THE WARANING. Once you replace the unit. Everything you have sent is in the memory and will print out.
What you will want to do is once it starts printing, continue to cancel the jobs until they are all out of memory. Believe me, the jobs are there....

Oct 09, 2008 | Xerox Phaser 6100/BD Laser Printer

1 Answer

HP LaserJet 3550 spits out blank paper when job sent from computer but prints fine when printing directly from printer


Try connecting the printer via the USB port on either one of the computers. Then test if the machine prints fine then likely possibility is that the Network interface card is faulty remove the network card and install in a different slot and test. If the same thing happens then reinstall the drivers and test.

Hope this helps
Thanks J

Jan 27, 2008 | HP Color LaserJet 3500 Printer

2 Answers

Adjusting printheads - won't stop and keeps printing blank pages


Hi Did you have any print jobs sent to the printer before replacing the printhead. It seems that the printer is trying to print a job and since the usb cable has been disconnected and reconnected the printer is printing blank pages or misc text.

Dec 03, 2007 | HP Officejet 9110 All-In-One InkJet...

Not finding what you are looking for?
HP LaserJet 1150 Printer Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...