Question about Weiser Lock POWERBOLT ELEC DEADBOLT

1 Answer

Will not reciece code to open lock.Have changed battery.It will lock.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 963 Answers

Http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Then go to: US & International/FAQ Categories/Keyless Entry/Powerbolt 1000/Search Results/ How do I troubleshoot my Powerbolt 1000?

I suggest calling the appropriate toll-free number and having a conversation with a representative about this problem, first of all to confirm that you need the part before you go through the expense. Secondly, your lock may be new enough for you to talk them into warrantying it, and thirdly, they will be able to get the correct part on order for you.

Good luck--and please provide feedback if this helps!

Posted on Nov 06, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the battery compartment in my ce electronical digital safe?


do you have a round lock pad. This model has 2 9 volt batteries under the key pad

http://bestbatterytips.com/change-replacement-batter/safes-with-electronic-locks-replacing-the-battery/

Lots of info here

  • How to open digital safe when battery is flat and key not ... www.youtube.com/watch?v=aqC9V7SDKdQ
    • BY KHTHHONL
    • 1 MIN
    • 417K VIEWS
    2012-11-09 · How to open a digital safe when the battery is flat and the ... How to open digital safe when battery is flat and ... How Secure Are Electronic Safe ...
  • Locked out of my Digital Safe [Archive] - PPRuNe Forums www.pprune.org/archive/index.php/t-357319.html PPRuNe Forums > Misc. Forums > Computer/Internet Issues & Troubleshooting > Locked out of my Digital Safe. ... CE (Chinese made) electronic security safe ... battery ...
  • LA GARD LG Basic digital electronic safe lock changing ... www.youtube.com/watch?v=M07EpfSmoAU
    • BY DEANSAFE
    • 3 MIN
    • 99K VIEWS
    2009-10-13 · For instructions on this and other electronic digital safe ... How to change the combination and battery on ... Basic digital electronic safe lock changing ...
  • User Manual for Safe EA25 Installation - Tayabally www.tayabally.com/digitalsafe/mannuals/Safe EA25 Installation... You should change the code as soon as possible after opening the ... BATTERY REPLACEMENT. This safe uses ... MAINTENANCE FOR KEY AND ELECTRONIC SAFE.
  • Elektronischer Digitaler Safe Electronic Digital Safe www.produktinfo.conrad.com/...799999/...DigitalerSafe_de_en_fr_nl.pdf · PDF file Electronic Digital Safe Version 12/08 ... (CE). Any usage other than ... Replace your batteries when both the red and green light illuminate. 1.
  • Instructions for an Electronic Digital Safe ' eHow www.ehow.com > Home > Home Safety > Home Safes Instructions for an Electronic Digital Safe By Shawn McClain eHow Contributor Pin Share ... Replace the used batteries with new ones. For most safes, ...


  • Apr 24, 2016 | Locks & Locksmithing

    1 Answer

    How do i re set electronic safe after changing batteries


    open the safe door on the panel beside the hinges there should be a reset button, Press the button once the safe beeps, input your new code and press A or B when finished code is now reset. Make sure you check your new code with the door open. Just turn the lock, input the code press your A or B which ever you chose, the lock dial should open.

    Feb 16, 2015 | Locks & Locksmithing

    1 Answer

    I changed the batteries and now I can't open the safe- do I have to reset the code and if so how?


    Assuming you've not changed the master code:

    To Open the safe with the master code:
    Enter the master code (pre-selected 123456) and press #. The LED will show -OPEN- and the door will open automatically and at the same time the LED will show "OPENED".

    Jan 15, 2015 | Gary Laptop Computer Safe, Steel,...

    1 Answer

    How do i set code for paragon safe


    INITIAL BATTERY INSTALLATION
    1. Remove the key plate cover, insert the key into the keypad and open the door.
    2. Remove the battery cover plate located on the inside of the door.
    3. Install 4 AA batteries provided and replace the battery cover.
    NOTE
    : If both the red and green lights are on while the safe is open, this indicates that the batteries are low and need
    to be changed.

    TO SET UP OR CHANGE A USER CODE
    1. With the door open, locate the red button on the back of the door near the hinge.
    2. Press the red button and listen for the beep.
    3. Immediately enter your new passcode (3-6 digits long)
    4. Immediately after entering your new passcode, press the "A" or "B" button on the keypad. Your new user passcode is now stored.
    NOTE:
    This safe stores up to 2 passcodes (a user code and a manager code). Entering a third code will erase the
    first passcode entered.

    SETTING UP OR CHANGING A MANAGER PASSCODE
    1. Open your safe with the passcode you wish to change and leave the door ajar.
    2. Press the "0" button on the keypad twice. Press the red button, listen for a beep and then enter your new user passcode.
    New user passcodes may be 3-6 digits long.
    3. Immediately after entering your new code, press the "A" or "B" button on the keypad. Your user code is now changed.
    OPENING THE SAFE
    1. Input your code and then press the "B" button, the green light will turn on.
    2. Turn the knob clockwise within 5 seconds to open the door.
    3. Each key pressed will be accompanied by a buzzer and a yellow flashing light. If the entered code is invalid the yellow light will
    flash and the buzzer will quickly sound, this indicates the code needs to be re-entered.

    CAUTION
    : Entering the incorrect passcode 3 times will lock the system for 20 seconds.


    More information can be found in the attached document web page.

    http://www.paragonlockandsafe.com/manuals/mastermanual.pdf

    Aug 29, 2014 | Paragon Electronic Digital Safe Jewelry...

    1 Answer

    How do i change the code on the S-25EBF safe


    I'm not familiar with that safe but here's a few to try. You'll need to open the safe first in any case after opening then first try simply entering another code, lock it (with the door open) and try to unlock it,. Next, there may be a reset button inside the safe on the door press, hold, release and try entering a new code this may also require you to enter the original code w/wo some type of access code. As a simpler method, with the door open and electronics exposed, remove the cover plate and batteries, wait at lease an hour and replace the batteries, this may also start you with a code such as 0000. Can you tell me where you purchased it? This may help a lot!

    May 21, 2014 | Safe International Digital Electronic Safe...

    1 Answer

    I have the key I know the3 combination but still i could not open because it's in low battery


    if you know the battery is low then you need to open your safe using the keys and then change your batteries as the safe won't open using your 3 digit code if the batteries are low.

    Jan 03, 2013 | Safe International Digital Electronic Safe...

    1 Answer

    Setting a new code


    Go to this link:

    http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

    Which will show you how to open and change the program code. It's a good time to change the battery!

    Jun 04, 2011 | Weiser Lock POWERBOLT ELEC DEADBOLT

    1 Answer

    Battery cover wont come off


    .

    Here's a link which tells you how to remove the cover, and reprogram the lock codes:

    http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

    Jan 13, 2010 | Weiser Lock POWERBOLT ELEC DEADBOLT

    2 Answers

    Code change for trilogy lock D2700


    First find out if you are dealing with a D2700 or the newer enhanced version. Press any 2 buttons and *,if you get a green LED and 6 beeps it is the new version. Old version remove battery and press any button. New version remove battery, press any number for 10 seconds,release, reconnect battery, press and hold the A button within 3 seconds, 6 beeps, release A button. the lock is at default and ready to program. To program new version 12345 A1A new combo A new combo this will set a new master code, if you are only using 1 code to open the lock this should suffice.

    Jan 27, 2009 | Trilogy Alarm Lock T2 TRILOGY® Digital...

    Not finding what you are looking for?
    Weiser Lock POWERBOLT ELEC DEADBOLT Logo

    81 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Weiser Lock Locks & Locksmithing Experts

    Azam Ali

    Level 1 Expert

    31 Answers

    Scoee Scoffer

    Level 2 Expert

    162 Answers

    Cindy Wells

    Level 3 Expert

    6046 Answers

    Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...