Question about Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan

1 Answer

How does the receiver of the Hunter model 21871 ceiling fan attach to the canopy? There are two things on the receiver that seem as though they should connect to the canopy with slots but no slots in the canopy. Is the receiver just suppose to sit loose in the canopy? Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

If you look at the mount bracket where the ball of the fan fits in to it should fit right above the ball in the mount bracket and if it can fit loose in the canopy thats ok to just long as ou can get the bell housing back up

Posted on Jan 23, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the receiver go on a model 59016 hunter fan


It goes in the canopy cover at the ceiling. Slide into bracket.

Aug 01, 2014 | Hunter 52" Ceiling Fan With Light And...

1 Answer

Trying to remove the Hunter Stratford II 52" ceiling fan. The canopy ring rotates approximately 1/4 turn but does not release.


http://www.hunterfan.com/uploadedfiles/Support/Owner_Manuals/41803.pdf

Page 8 of the model 20761 Hunter ceiling fan shows how to remove the canopy trim ring. Ours had double stick tape holding the brushed nickel to a plastic trim ring. Dropped it, then squeezed the plastic ring.

Sep 19, 2011 | Hunter 20761 52'' The Stratford II Brushed...

1 Answer

Fan will not work, but light will. it is model # 21871a-420. the remote will not work either function. there is power at the box. i purchased a new Hunter universal remote model # 27227 and the wiring is...


You have to get the correct receiver for that fan. There's no such thing as a universal remote,no matter what it says on the box. Call 1-888-830-1326 and you can order your correct part.

Sep 04, 2011 | Hunter 21871 56'' Ergonomic Brushed Nickel...

1 Answer

Bought a display hunter 20171 Ergonomics C Fan. The wires were cut short, remote control receiver not included.


have no choice but to buy the original receiver through hunter - not a replacement from HD or Lowes - it will not work.

Nov 27, 2010 | Hunter 21871 56'' Ergonomic Brushed Nickel...

1 Answer

The canopy doesn't seeem to fit flush up against


You just need to wrap it and tuck it .. You might need to cut some of the fan wires shorter so there is not so much bulk under the canopy cover. The fans are shipped with enough wire leads to be able to use a down rod, They can be cut shorter when the fan is being installed.

Mar 02, 2010 | Hunter 21871 56'' Ergonomic Brushed Nickel...

1 Answer

Hunter 3 speed ceiling fan now turns slowly


Probably a bad capacitor. What model is it? If it completely wireless (in other words: no pull chains for light or fan) the capacitor is located on the receiver for the fan (in the canopy or the lower switch housing). Unless you are handy with a soldering iron, it is easier to purchase a replacement receiver.

Apr 13, 2008 | Hunter Dryers

1 Answer

Remote control fan


I had the same problem and I thnk Hunter Fan knows about it....I just called Hunter Tecnical Support at 901-745-9222 and they sent me a new White circular receiver which goes inside of the canopy and it worked fine after installing the receiver....

Mar 14, 2008 | Hunter 21871 56'' Ergonomic Brushed Nickel...

Not finding what you are looking for?
Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Joe Paxton

Level 1 Expert

9 Answers

Paul Bade

Level 3 Expert

1662 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...