Question about UPM Remote Control Timer Set

Open Question

My remote control doesn't work. I have tried to reset it by pressing the learn button and then pressing the on button, but it doesn't seem to link up. what could be wrong?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the frequency of a garage door opener 139.53930ODM?


Hi... You have to "erase all codes" (you can read that section of the manual and teach the opener to use the remote using a new code. You can get the manual at the Craftsman site, page 35. Essentially you do this: access the reset button n the back right of the motor, press and hold the 'learn' for 6 seconds or more,until the learn light goes off. TO reprogram it, press the learn button until the light goes on, then within 30 seconds, press and hold the desired button of the remote. Voila!

Dec 26, 2014 | Chamberlain Liftmaster 355LM 315MHz Garage...

1 Answer

My garage door receiver does not have a "learn"


The 900 series remote control only works with door openers having an orange learn button see the liftmaster remote 971 manual 4th one down

Feb 19, 2011 | liftmaster 971 Lm Remote

2 Answers

My remote for a denon 2805 doenn't seem to be working. When I try to change to say DVD it doesn't work. The CD button just lights up. I also have a Harmon remote that I have learned the commands on but...


Check on e-bay for a replacement, call Denon tech support and have them send you a new one, or buy you a universal remote and put in the code from their manual for your Denon receiver.

Oct 26, 2009 | Denon AVR-2805 Receiver

1 Answer

Can't set code for keypad and remote...one works, then when other


You have used up all of the remote spaces on the opener. You need to reset the remotes. Press and hold the learn button for 8 seconds. This clears the memory for all remotes. Then press and release the learn button and then press the button on the remote. The light will blink once on the opener. Repeat this step on the other remotes.

Feb 25, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Deactivating tv remote control codes


I am not certain these are the instructions for your specific remote. If you are brave, give this a try.

To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you
replace your CD player with another brand or model. If
you had learned a feature from your old CD player’s
original remote on to this remote (such as RANDOM
PLAY), that feature would no longer work for your new
CD player. Should you wish to remove or clear one or
more “learned” commands, follow the steps below:
1. Press and hold the SETUP button until the red
indicator turns on. Release the SETUP button.
2. Press and release the button for the mode you want
to clear (TV, VCR, etc.). The red indicator blinks off.
3. Press and release the LEARN button TWICE. The
red indicator blinks off.
4. Press and release the SETUP button. The red
indicator turns off. All learned Commands under that
mode are now cleared.
Master Clear - To Clear all Learned
Commands under all modes
1. Press and hold the SETUP button until the red
indicator turns on. Release the SETUP button.
2. Press and release the LEARN button TWICE. The
red indicator blinks off.
3. Press and release the SETUP button. The red
indicator turns off. All Learned commands in the
remote are now cleared.

If you would rather error on the side of caution, here is the link to Philips Customer Assistance. It will help you locate the correct model number and the appropriate User Manual.

http://www.support.philips.com/support/html/index_us_en.html

I hope this helps, good luck!

Kym McC

Oct 05, 2008 | Philips Magnavox Learning Universal Remote

7 Answers

Remote control code


The remote control for your DVR has the capability to control 2 additional DVRs in addition to the one that you currently have. In order for the remote control to work with your DVR, you will need to make certain both of them are talking on the same frequency. If you press the remote control and the front of your unit says DR2, that means that you need to have your remote on DR2 as well so that it can operate the DVR. To set your remote to DR2, you will need to make sure the unit is off then you will need to press and hold down the SETUP button and while you are holding this button down, press the number 2 button. Your remote is now set to DR2.

Good luck...

Sep 07, 2008 | Toshiba RD-XS35 DVD Recorder/HDD Recorder

1 Answer

Re: Remote Control Brand: Pioneer Model: XXD3086 I'm trying to set-up my remote control to my TV and I can't because I lost the instruction book. Please help me with the...


Pioneer remote XXD3086:

1. While pressing the Receiver button, press and hold the 1 button. LCD shows SETUP.

2. Press the Milti Control button for the component you want to control. LCD displys the component (for example, TV/Sat).

3. Use left and right cursor buttons until the LCD displays Preset. Press Enter to select Preset.

4. Use up and down cursor buttons to select the first letter of the brand name of your component. Press Enter. For example, select P for Pioneer.

5. Use up and down cursor buttons to select the manufacturer's name from the list. Press Enter.

6. Use up and down cursor buttons to select the proper code from the list. DONT press Enter yet.

7. Try out the remote control. For example, switch the component on or off by pressing Source. If it doesn't seem to work, select the next code in the list (if there is one).

8. Press Enter to confirm. LCD displays Ok.

VSX-915 model only:
Instead of selecting Preset above, select Learn. Point the two remotes at each other, press the button that will be doing the learning, press the corresponding button on the other remote that is teaching. Press the Receiver button to exit.

Apr 27, 2008 | Pioneer DVR-107D DVD±RW Burner

1 Answer

Tv remote control


You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Apr 22, 2008 | Televison & Video

1 Answer

Unresponsive remote


Had same problem with this reciever over the weekend. I had to hook up a TV to the COMPOSITE monitor jack and then I could see the menus. I could never get it to show the menu over the component outputs, however a DVD player hooked up played perfectly. Anyone have a solution?

Jan 21, 2008 | Denon AVR-2803 Receiver

Not finding what you are looking for?
UPM Remote Control Timer Set Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top UPM Hardware & Accessories Experts

Brad Brown

Level 3 Expert

18110 Answers

Gene Haynes

Level 3 Expert

5390 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Are you an UPM Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...