Question about HP LaserJet M4345 MultiFunction Printer

2 Answers

HP LaserJet M4345 - The printer display is mangled, the touch screen does not respond properly to commands. Is there a way to reset it?

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 1,915 Answers

Calibrate the control panel

Use the following procedure to calibrate the control panel:

1. Turn the device off.

2. Press and hold the # key and the C key.

3. Turn the device on.

4. When a small white square appears in the upper-left corner of the control-panel display, touch

the square with a stylus.

5. When a small white square appears in the lower-left corner of the control-panel display, touch

the square with a stylus.

6. Allow the device to finish the boot process.

Hope this helps.

Posted on Mar 11, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Waoo that great its working thanx baddy

Posted on Sep 28, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove password from printer hp laserjet m4345 mfp


Turn the power off.

-Press AND hold the down arrow (or left arrow) and cancel at the same time.
-Turn on printer still holding the keys.
-Wait until message "Permanent Storage Init"
shows on screen.

Aug 03, 2017 | HP Office Equipment & Supplies

1 Answer

How to assign ip address for laserjet M4345 when it is reset at 0.0.0.0


1 Press MENU.
2 Touch CONFIGURE DEVICE.
3 Touch I/O.
4 Touch EMBEDDED JETDIRECT MENU or EIO JETDIRECT MENU, depending on which type of
network connection you are using.
5 Touch TCP/IP.
6 Touch CONFIG METHOD, and touch MANUAL.
7 Touch MANUAL SETTINGS
8 Touch IP ADDRESS
9 Touch the left arrow or the right arrow to highlight each segment of the IP address.
10 Use the numeric keypad to type the digits in each segment of the IP address.
11 Touch OK to save the IP address.

Sep 16, 2013 | HP LaserJet M4345 MultiFunction Printer

1 Answer

I AM UNABLE TO SET FOLDER IN MY PC PLZ GIVE AME ANY SOLUTION


HI,

its is simple on the desktop click right button of the mouse and select new and then click on it

you can create your own folder.pls visit the following site

HP LaserJet MFP and All-in-One Products - HP Universal Print Driver: Bin ... and LaserJet AiO/product Products - Solve Common Macintosh problems 25 Mar 2011 ...
h20000.www2.hp.com/.../SupportTaskIndex.jsp?... - Cached - Similar HP LaserJet M4345 Multifunction Printer series - Manuals - HP ... HP LaserJet M4345 MFP - (multiple language) Getting Started Guide North ...
h20000.www2.hp.com/.../SupportTaskIndex.jsp?... - Cached - Similar

May 30, 2011 | HP LaserJet M4345 MultiFunction Printer

1 Answer

Model HP LaserJet M4345 MFP The printer displays


You've done everything but replace the formatter.
Can you look at the Event Log? Look for a 79.xxxx error. That is definately a formatter.
Is this a solid error, meaning does it appear when printer inits?
Remove the DIMMs and flash memory and network cable. And reinstall one by one until error reappears.
Do you have another 4345 that you can "borrow" a formatter from?

Jan 11, 2011 | HP LaserJet M4345 MultiFunction Printer

1 Answer

Incorrect Pin Error message coming on HP LaserJet M4345 MFP printer..


The pin for this specific machine should be 11434506.
If that doesn't work you must cold reset the machine.

Turn it off the machine.
Turn machine on hold 6 down until the memory count is done and all 3 lights are on release 6 and use 3 to arrow up to cold reset and press 6 "acts as the enter button"

FYI
3 works as arrow up
9 works as arrow down
6 works as the Enter button

Oct 15, 2010 | HP LaserJet M4345 MultiFunction Printer

1 Answer

LaserJet M4345 MFP Printer: how to cold reset in HP LaserJet M4345 MFP...


walid_sayed@hotmail.com
To perform a cold reset
1 Turn the MFP off and then on.
2 When the memory count appears on the control-panel display, press and hold 6 until all three
LEDs flash once and then stay on. This might take up to 20 seconds.
3 Press 3 four times until COLD RESET appears on the control-panel display.
4 Press 6 one time. The MFP continues its initialization sequence.

May 07, 2010 | HP LaserJet M4345 MultiFunction Printer

1 Answer

My hp laserjet m4345 mfp has all three lights flashing and wont work


Try performing a cold reset. press and hold "6" while booting and counting RAM. Release when all 3 led's are lit. Use "3" and "9" and navigate to "Cold Reset". Press 6 to enter.

Dec 16, 2009 | HP LaserJet M4345 MultiFunction Printer

Not finding what you are looking for?
HP LaserJet M4345 MultiFunction Printer Logo

1,071 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...