Question about HP Deskjet D2360 InkJet Printer

Open Question

I have a HP deskjet D1360, there was a paper jam which i have cleared. The green power light is flashing and will not print! Help. I need to print e flight tickets for journey tomorrow. I have turned the printer off, rebooted the laptop and turned the printer back on but still getting the flashing power light

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
IrishDruid

Swilin Sampson

  • 2712 Answers

SOURCE: hp deskjet d1360 printer installer

Select your operating system and download from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1119266&lc=en&cc=us&dlc=en&lang=en&cc=us

Dont forget to rate this a Fixya if it helped!

Cheers!
ID

Posted on Nov 17, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: deskjet printer problem -paper jam still remains on the coputer mode.

printer is not working not printing

Posted on Dec 18, 2007

Anonymous

  • 1 Answer

SOURCE: Power on switch and orange arrow flashing, will not feed or print.

I had the same problem and found this solution. It worked for me, hope it helps you too.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpd09315&lc=en&cc=us&lang=en&product=60653&dlc=en

Posted on Aug 25, 2008

manojro

Manoj Rout

  • 495 Answers

SOURCE: hp deskjet 5552 how to reset?

HP LaserJets - Cold Reset Instructions Cold resetting a printer resets the printer to factory defaults. Please note: Any settings you make at the printers control panel will be reset to factory defaults, including the IP address if you have a JetDirect card installed. Remove the JetDirect card while you cold reset the printer if you don't want to erase the JetDirect card's settings.

You can also reset the NVRAM. Resetting the NVRAM will clear the page count and reset the service mode settings to factory defaults. On printers with a display panel you need to enter service mode to manually change the information stored in NVRAM. On printers that don't have a display panel, such as a 5P, 6P, 2100, 2200 there is a different procedure outlined below.
coldreset.jpg
"Older" printers with a display panel. (e.g. 4000, 4100, 5si, 8000, etc.)

Cold resetting the printer is simply a matter of turning the power off, holding down the GO or Online button while turning the printer on.
Resetting NVRAM settings must be done manually through service mode. See entering service mode.
"Newer" printers with a display panel. (e.g. 2300, 2400, 4200, 4250/4350, 4300, etc.)

Turn the printer off and then on. When the printer begins its memory count, press and hold down the Checkmark button until all the main LED signal lights illuminate and stay illuminated. Then release the Checkmark button, and use the Up/Down arrow keys to find the Cold Reset option, then press the Checkmark button again to choose that option.
Printers with no display panel.
HP 1100, 1200 - While the printer is on, press and hold the Go button for 5 seconds. This will reset the printer.
To reset the NVRAM. Turn the printer off. Press and hold the Go button for 20 seconds while powering on the printer.
HP 2100 - To perform a cold reset, turn the printer power off, then press and hold the JOB CANCEL button. Turn the printer power back on and after all the LEDs come on release the JOB CANCEL button. A cold reset changes most system parameters in NVRAM to the factory defaults. The JOB CANCEL button must be released within 20 seconds after all of the LEDs come on; otherwise, an NVRAM initialization is performed instead of a cold reset.
HP 2200 -
Cold reset:
1. Turn the printer power off.
2. Press and hold GO.
3. Turn the printer power back on and continue to hold GO until the Attention light turns on.
4. Release GO.
5. The device lights will begin cycling from front to rear. The cold-reset process will run until completion and the device will go to the ready state.

NVRAM Reset:
1. Turn the printer power off.
2. Press and hold GO.
3. Turn the printer power back on and continue to hold GO until the Attention, Ready, and Go lights turn on.
4. Release GO.
5. The device lights will begin cycling from font to rear. The NVRAM initialization will run until completion and the device will go to the ready state.
HP 5P & 6P
Cold reset:
Turn the power off and hold the reset button (button closest to the back of the printer) for LESS than 20 seconds while turning the printer on.
Reset the NVRAM:
Turn the power off and hold the reset button for MORE than 20 seconds while turning the printer on..

Posted on Dec 02, 2008

Anonymous

  • 1 Answer

SOURCE: My HP Deskjet D1360 printer

bos dimana tempat download driver hp deskjet 1360

Posted on Dec 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do the three lights on the top right of the 920c HP printer indicate?


Hi,

The first light (from left to right) is the Print Cartridge Status.

This will flash if one or more of the ink cartridges are low or the cartridge incorrectly inserted. Also flashes if the wrong type of cartridge inserted.
If the ink is low the light will stop flashing when you open the top cover of the printer.

The second light is the Resume Light.
This will flsh when anaction isequired such s loading paper or clearing a paper jam.

The third light is the Power light.
This will flash green when the printer is printing.

Hope this helps you. Thanks for using FixYa.

Nov 18, 2011 | HP DeskJet 920c InkJet Printer

1 Answer

Hp deskjet 948c. What Do The Button's Do


buttons and lights The HP Deskjet printer buttons let you turn the printer on and off, cancel a print job, or resume printing. The lights give you visual cues about the state of the printer
sayurisan20_33.jpgcancel button

** Pressing this button cancels the current print job. sayurisan20_34.jpg

print cartridge status symbol and light **The light above the Print Cartridge Status symbol flashes when a print cartridge is low on ink or incorrectly installed.
sayurisan20_35.jpg resume button and light
**The light above the Resume button flashes when an action is required such as loading paper or clearing a paper jam. When the problem is fixed, press the Resume button to continue printing.
sayurisan20_36.jpg power button and light **
The Power button turns the printer on and off. It takes approximately five seconds for the printer to turn on after you press the Power button. The green light above the Power button flashes when printing is in progress. Caution! Always use the Power button on the front of the printer to turn the printer on and off. Using a power strip, surge protector, or a wallmounted switch to turn the printer on and off may cause premature printer failure

Jun 17, 2011 | HP Office Equipment & Supplies

1 Answer

The green light on my HP Deskjet 3845 is flashing ..when I try to print it tells me there is a paper jam ..there is no paper jam. I have inspected the printer carefully, reloaded the paper. It will not...


i think u should check for peices of paper ,tiny objects etc that might be obstructing the movement of the paper. also check that the print head is not disconnected from the belt you can check this by slidind the print head from side to side and ensure that both of them are moving hope this helps.

Oct 19, 2010 | HP Deskjet 3845 InkJet Printer

1 Answer

I have use the HP Deskjet D1360 series printer paper jam


Simple and slowly remove the jamm'ed paper. Please be sure to inspect the system in detail (you may need tweezers) for any small pieces of random paper laying around.

After this you should be set please let us know if this issue persists as this would be a sign of other issues.

Thanks
Frank
Live-Tech
1-888-361-8511

May 24, 2010 | Office Equipment & Supplies

1 Answer

Both paper feed and power lights flash after printing several pag


lean head-eject ink ruler & clean point of contact betwin cartridges and head-ink unit.

Aug 07, 2009 | HP DeskJet 970cxi InkJet Printer

1 Answer

Both power light and paper jam light on


clear the paper jam. take out the paper(if any) from back of the printer. Clear all prints in que and try to print

Aug 13, 2008 | HP DeskJet 970cxi InkJet Printer

3 Answers

D1360 black ink didn't print and green light keep flashing


just unplug the power cable and usb cable from the back side of the printer and let it be for an hour it will help

Apr 15, 2008 | HP Deskjet D2360 InkJet Printer

Not finding what you are looking for?
HP Deskjet D2360 InkJet Printer Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...