Question about Washing Machines

3 Answers

I washed a throw rug about 4 x 2 ft & it was very wet when finished I ran it through spin only twice & it didn't help much. Someone said to check the outlet filter, don' know where that is. Could there be something else I should do?

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Washing Mach... Expert
  • 517 Answers

You need to clean the filter and pipes from tub drain hose to exit

Posted on Mar 09, 2014

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Most cheep rugs sold in box stores are "hand tufted". What this means is that cheep adhesives are used to hold the rug together and when washed the adhesives come out, destroying the rug and plugging up the filters on your washer. Find a certified rug expert to care for ALL loose rugs and you will avoid the greif.

Stephen "Dusty" Roberts
Certified Master Rug Cleaner
www.rugbadger.com

Posted on Feb 13, 2011

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

THE WASTE PUMP IS BLOCKED OR DAMADGED AND IS NOT PUMPING OUT

Posted on Feb 02, 2011

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine, model #WA45M7050AW/A4, wash throw rugs. There is no information in the manual which came with the machine. Is there any information one might find useful when washing a rug?


like a bedspread throw rug, rather than a rug for the floor?

Same as the material it is made from, normally cotton. Cold wash, minimum agitation, medium spin. You may need to re-balance the load after washing as it is a top loader.

WA7050 4 5 cu ft Top Load Washer Washers WA45M7050AW A4 Samsung US

Mar 18, 2018 | The Computers & Internet

Tip

THANK YOU !!!!! and thanks to my 15 yr mechanically inclined son...he did do...


This advice is for Kenmore Elite and Whirlpool Duet model FRONT LOADERS displaying the “F02” error code.

“F02” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:

  1. Check the drain hose to make sure it is not kinked or clogged.
  2. Check the electrical connections to the pump and ensure the pump is running.
  3. Remove the drain pump filter and check for foreign objects and/or debris.
To check the drain pump, click on the following link for step-by-step instructions.


http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front

If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump.

on Aug 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Will not spin & now will not wash,


June,
unplug it for a minute replug. should reset the cpu.
Best to you.

Jan 04, 2018 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

When washing a throw rug, I need extra spin but it won't seem to let me set the extra spin option...what am I doing wrong?


it could be a defalt for the paticular cycle your washing the rug on to not allow for an extra spin. try a normal or heavy duty cycle.

Feb 19, 2011 | Kenmore 3.5 cu. ft. Front Load Electric...

1 Answer

3 area rugs wee washed but would,nt spin out . E20 kept flashing. I took all but 1 rug out machine finished cycle but still didn,nt wring out This has never happened before


there is a lint screen inside the water pump hose(the one that goes from the outer tub to the pump). if you have a port or access door to get to it remove it, if not you may have to remove the front panel to get to it. you could have debris blocking the drain and causing the computer to delay the spin process.

Feb 09, 2011 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Throw rugs are dripping wet after washing. My washer doesn't have just a spin cycle, so I have to rinse and spin. This still doesn't help. Every rug I wash comes out dripping.


The washer is likely detecting an off balance load with only a rug or two. You may want to try and put more rugs or old towles in to offer a counter balance to alleviate off balance condition. Or, you may consider washing the rugs at a commercial facility. They really are hard on the residential machines, especially if they come apart or the backing comes off.

Jan 12, 2011 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Washer won't spin. Washed bath mats (small) and


Read a post from someone else on this - turned out it works fine, just wouldn't work with the small wet load. I added towels to the bath mat load, washed them, it spins fine. Washed clothes & that worked fine too. Yay!! Not broken. Just not found of small loads of bath mats!

Jan 22, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

WHIRLPOOL LXR7244JQ1 CLOTHES ARE STILL SOAKING WET


More than likely motor has lost a stage in it. I would replace it.

Jun 29, 2009 | Whirlpool 3.2 cu. ft. Plus Washer

1 Answer

Kenmore HE 3t started leaking from the side when filling


check dispencer and make sure its not cracked,,if not turn your water pressure down to the dispencer its splashing up and over running down..keep me posted onthejob

Jan 12, 2009 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...