Question about Lands Phones

1 Answer

How do i program your 20200-1 hand set telephone. it has 13 number memory. that i wold like to program?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 225 Answers

To program one of the three emergency buttons:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) press one of the three emergency buttons
6) replace the handset in the cradle
To use; lift handset and press an emergency button, the phone dials the number stored for that button

To program one of the ten memory locations:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) dial a one digit number(0-9) to store the number in that location
6) replace the handset in the cradle
To use: lift the handset, press the MEMORY button, dial the memory location digit(0-9), the phone dials the number stored in that memory location


Here is a link to download the manual.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Posted on Feb 11, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a manual or instructions for Durabrand 13 Memory-Speakerphone PH-3235


Try this site or look for Lenoxx PH-3235 instead of Durabrand http://www.retrevo.com/support/Lenoxx-PH-3235-Telephones-manual/id/22975ci268/t/2/

Aug 05, 2012 | Televison & Video

1 Answer

How do I turn off the ringer for the fax line?


I'm guessing that the fax line also appears on the telephone sets and rings on them.
Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Central telephone Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Aug 24, 2010 | Lucent PARTNER18 Corded Phone

1 Answer

Program phone numbers into memory


My friend, thank you for this information. I understand your frustration at not being able to program Mom's telephone number into your Durabrand so she can speed dial you.

Thank you for this information. At least now I can suspect this is a telephone to be used with a hard wire telephone system, probably in a home, and not a cell telephone.

I searched Durabrand and, well, I still don't know who they are or where they are. I was going to try to get to the instruction book that should have come with your telephone. I couldn't find any Durabrand web site. So, now I share a part of your frustration, but at least you have the telephone in your hand to work with, while I have nothing.

If this is a new device, and you don't have the instruction book, I suggest you return it to the place you bought it and get a model that has instructions with it. Perhaps you should inquire before you leave the store as to programming issues.

The best I can do at this point is offer this web site for you to search: www.archive.org. And, additionally, I will suggest there is, on the telephone, some place where you can get a menu. You will have to search the menu for the speed dial directory. Once you find that, it should be self-explaniatory.

My friend, thank you for using FixYa.com. Please come back often. Remember, good questions get good, quick answers at FixYa.com. Please include important particulars without drowning we volunteer question catchers with unnecessary details.

Thanks

Jan 07, 2010 | Lands Phones

1 Answer

I want to find out how to set up our Canon CFX0-L4000 fax Machine


CANON CFX-L4000 UNOFFICIAL MANUAL

RIGHT KEYPAD

FUNCTION
SET
01 DATA REGISTRATION
02 DELAYED TRANSMISSION
03 POLLING
04 MEMORY REFERENCE
09 REPORT
11 UP
13 +
14 LEFT
15 SPACE
16 RIGHT
18 CLEAR
19 DOWN

Keys 1-20 are speed dial keys. If speed dial is not set, message is displayed and manually entering the telephone number is prompted. Press STOP to clear.

Pressing FUNCTION accesses the menus associated with keys 1, 2, 3, and 4. After accessing a menu, the cursor keys, SET, and occasionally the telephone key pad are used for selecting options and setting values.

EG. Setting a speed dial number:
FUNCTION - DATA (01) - SET - SET - UP/DOWN to select speed dial number - SET - UP/DOWN to set number/name - SET - UP/DOWN/LEFT/RIGHT/PHONE KEYPAD to enter value - SET

EG. Setting unit telephone number
FUNCTION - DATA (01) - DOWN once - SET - DOWN once - SET - PHONE KEYPAD to enter number - SET

EG. Retransmit from memory (assumes memory light is on)
FUNCTION - MEM (04) - DOWN once - SET - UP/DOWN to select document number (LEFT/RIGHT to view associated telephone number) - SET

EG. Delayed transmission
place document into feed - FUNCTION - TX (02) - SET - PHONE KEYPAD to enter time to send - SET - PHONE KEYPAD to enter phone number - SET - SET - document is scanned and will be transmitted at set time


for full guide you will have to search and purchase one.

May 28, 2009 | Canon Office Equipment & Supplies

1 Answer

Bell Phones by Northwestern Bell Phone 20200 memory function


Here is a link to the manual with the instructions in PDF format. You can wither download and print it or just follow the instructions. Glad to help!

http://www.smarthome.com/manuals/5172_Man_English.pdf

Mar 27, 2009 | Northwestern Bell Big Button Plus 20200...

1 Answer

Binaton big button combo telephone


Press Speakerphone button
Press Set/Store
Enter the telephone number
Press Set/Store
Enter the memory number (M1, M2, M3 or 1-9)
Press Speakerphone button to hang up.

To use the memory feature,
For M1, M2 or M3, just pick up the phone and hit that button.
For memory number's 1-9, pick up the phone, press auto button, then enter number 1-9 for who you want to call.

Apr 16, 2008 | Lands Phones

1 Answer

Remove save number


My parents bought a Big Button Plus 20200 and people that call them cannot hear anything. We can hear the person calling but they can't hear us. Any suggestions?

Nov 26, 2007 | Northwestern Bell Big Button Plus 20200...

1 Answer

Need manual


Given that consumer telephones are inexpensive, the cost of repairing the speaker phone on the 960 (assuming you still have it) is probably not worth it.

Going off of my memory....to program a speed dial you would first press "Program", enter the telephone number you want stored and then press the one of the memory buttons to save the number to. If the number is to be saved on a lower memory position press "Lower" before you press the memory button.

AT&T's telephone product website has a section where user manuals for many AT&T and Lucent branded telephones.

http://telephones.att.com/telephones_ui/support/dsp_manuals_list.cfm

The 960 is no longer listed, but the many of the basic functions are similar to the 922.

Sep 20, 2007 | Lucent AT&T 960 Corded Phone

1 Answer

ConairPhone SW324WCS


I just had same problem and went conairphone site and found model sw322 that looked about the same. I downloaded the manuel and it worked for my phone. Here it is. MEMORY FEATURE To Program Your CONAIRPHONETM telephone is equipped with 10 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each of the numeric keys (0 through 9), by following the steps outlined below: 1. Lift handset (releasing hook switch). 2. Press and release STORE key. 3. Press the keys for the telephone number you wish to store. 4. Press and release the STORE key again. 5. Press the keypad number (0-9) you want that telephone number stored in. 6. Your number is now stored. 7. To change a stored number, repeat the same process. The new number will store over the old stored number. A Memory Index card is provided for your use in writing down the person?s name. To Retrieve Memory Numbers Keypad Memories: To retrieve numbers stored in the keypad, pick up the handset and press the MEM (Memory) key. Then press the keypad number (0-9) which stores the telephone number you want to dial. Your call will be automatically dialed.

Jul 12, 2007 | Conair SW324WCS Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...