Question about Frigidaire FEB30S6DC / FEB30S7DC Electric Single Oven

1 Answer

I have a slide in Frigidaire Professional Series Range. When i put it on self clean -- after about 2 hours it starts to beep and flash a F1 error. The only way to quiet it is to turn off the breaker until it cools down. This is the second time it has done this. Help ! it is not that old (5 years)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Frigidaire Master
  • 9,472 Answers

This usually indicates a faulty EOC, electronic oven control. Please see the image provided below that explains the F1 error code on your Frigidaire range.
I have a slide in - richroth_107.jpg

Posted on Feb 13, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oven is keep beeping and I can't cancel it


Good Morning Friend, that's a great question!

Typically error code F10 indicates that your Frigidaire range has detected an issue with the runaway temperature (overheating). Let's attempt reprogramming your range by either unplugging it or flipping the household circuit breaker off. It is best to wait roughly ten minutes and then turn on your range. Usually this will clear most false error codes. If issue persists, at this moment I would suggest contacting a professional to proceed further. Most likely the RTD Probe (Resistance Temperature Detector) or the EOC (electronic oven control) will need replacing. Hope this helps! - Z

Aug 13, 2014 | Frigidaire Ovens

Tip

Please help. We are a cleaning crew that went to a client's home to do a reno...


If you are having oven problems with your GE XL44 oven then you need to do a bit of oven troubleshooting. The first part of that problem is to know what the oven fault codes are trying to tell you.

The codes F0, F1, and F7 could either be a problem with the control or the keypad.
-to see what the problem is cause by, push clear/off on the keypad. Then disconnect the ribbon connector from the control. Wait at least 35 seconds to see if the code comes back. If the code comes back then the control is the problem. If the code does not come back, then replace the key panel.


F2 – This means there has been a problem with the temperature of your oven. It could be a cooling fan or air flow problem. Also could be that the oven got too hot in either a baking mode or a cleaning mode.
-check to make sure the contactor contacts are not welded together. If this happens the oven will always be putting out heat, even if turn off. The thermal switch may also have burnt out. If this switch is open then the fan may be bad, causing the thermal switch to activate. The thermistor that senses oven temperature may also bed bad or have a poor connection somewhere.


F3 and F4 - These are oven temperature sensor codes.
- check the sensor by removing power to the range and then removing the sensor. Check that the sensor reads approximately 1100 Ohms at 72 degrees F. Then check the oven sensor lead to make sure that it is not shorted out. Then check the terminals to make sure that you are getting good contact. If everything checks out okay, then replace the control.

F5 – This is a relay safety circuit failure code
-check the lock circuit for problems. Then check the thermistor for high resistance. Press clear/off on the key pad and reprogram the control. If the code is still there then replace the control.
The F5 code can also result from a short loss of power. If you had a power flicker then reset the control.

FC – This shows a problem with the door lock circuit. Check all the wires and the switches. Check the operation of all the switches.

FD – This is a problem with the meat probe. Check the probe wiring and the receptacle where the probe plugs in at. Resistance on the probe should be 30 to 50K ohms at 72 degrees F.

FF – This is a problem with the door motor safety circuit. To fix this the control will need to be replaced.


http://www.fixya.com/support/r4388324-oven_fault_codes_ge_xl44_oven

http://www.fixya.com/support/r4391163-range_stove_oven_door_glass_replacement

http://www.fixya.com/support/r4404788-electric_oven_problem_oven_will_not_shut

http://www.fixya.com/support/r4319588-electric_oven_problems_not_use_in

http://www.fixya.com/support/r4154940-fault_codes_admiral_range_stove_oven

http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

http://www.fixya.com/support/r3907570-buy_appliance_parts_online

on Jul 01, 2010 | Ovens

1 Answer

Fridgidaire self cleaning range: F1 error code?


You have a control board failure. First thing I would try is to unplug the range for at least 10 min. and then plug back in and see if that works. Hope that helps

May 29, 2014 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Frigidaire flashing F1


Hello wills_amber - Typically, error code F1 indicates that the range has detected a runaway temperature issue (overheating). Try reprogramming the range by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and if the error code does not clear, I would recommend contacting a professional to proceed further. Most likely the EOC (electronic oven control) on the range will need replacing.

Mar 21, 2013 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

My oven just started beeping and flashing an F1 symbol and won't stop for a while. Can someone tell me why this is and how to fix it? Thank you so very much.


Hi,

You can try a hard reset by unplugging the range for a good 1/2 hour, then plug back in. Unfortunutely this probably won't work, as these clock/timers are notorious for only lasting a few years. You have to blow $150+ and replace the clock/timer.

Note: A hair dryer will help you get the face off the old one to put onto the new one

Please rate this solution
Rnj VINODKUMAR

Nov 14, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Oven door locked


ah, you lucky guy. You can try a hard reset by unplugging the range for a good 1/2 hour, then plug back in. Unfortunutely this probably won't work, as these clock/timers are notorious for only lasting a few years. You have to blow $150+ and replace the clock/timer. Note: A hair dryer will help you get the face off the old one to put onto the new one.

Nov 10, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

F1 ERROR


Hi. This (f-1) code represents a failed oven control board. Have this damaged board replaced asap, if possible. It has failed. Possible logic chip set failure.

Aug 22, 2009 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

Self cleaning oven won't lock


Generally
There is a motor that lets the latch slide out and catch the door either this latch motor isn't getting power from the board or the motor is bad. You will have to need a volt meter and a wire diagram, and take the covers off to see the motor and board.

Always remove power until you get the item open and can see whats going on before reapplying power.
If you don't feel confident I recommend calling in a repair man.

Mar 08, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Frigidaire during cleaning F1 error,


F1 means its your electronic control and it will probably cost you the same amount to get this problem fixed again. The part is usually $350 plus.

Nov 24, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

Not finding what you are looking for?
Frigidaire FEB30S6DC / FEB30S7DC Electric Single Oven Logo

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Bruce Denton

Level 2 Expert

273 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...