Question about Ovens

1 Answer

Timer dosn't work therefor oven dosn't go on - Ovens

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 235 Answers

The timer must be working and must be in manual mode for the oven to operate. If the timer is blank it is probably faulty and you will need a new timer. If you don't need the timer/clock the timer can be by-passed inside the oven by someone who knows what their doing and the oven will work no problems.

Posted on Mar 02, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you set the clock/timer to make the oven work?


have not idea what the make is therefore can not look it up search Google for an instruction manual

Apr 20, 2016 | Ovens

1 Answer

I have a Zamussi ZUQ875 double oven. I have just replaced the bottom oven element after it went bang. Nothing tripped out but the digital display has gone out and cannot get main oven to work because


i suspect that you did cut power to the oven when you replaced the element. therefore the oven needs to be reset as new. there are quite a few pages of instructions on setting the timer so be prepared if you are going to to proceed with this "little" project.
I was able to locate your manual online here:http://kitchen.manualsonline.com/manuals/mfg/zanussi/zuq_875.html?idRes=625295

I suggest unplugging it for a few minutes...then plugging it back in. Hopefully if the electrical is good you will see the oven's timer flashing. then you can proceed with the instructions from page 7.
Otherwise, you may have a blown a short and should get a licensed electrician to look at it.
Another option would be to contact the manufacturer:service.eid@electrolux.ie

Or, find the bloke that installed it and invite him over for dinner and maybe he'll notice it's not working and will fix it for free! ;-)
Good luck mate!

Feb 22, 2012 | Zanussi ZDF490 Electric Double Oven

1 Answer

I have a New World Twinline 4000 double oven which is approx 15 years old. The progammer has developed a fault and I cannot set the clock, therefore the oven won't switch on. Is this repairable because...


You need to take the timer out of the circuit (you will only be able to run the oven without timer).
1. Switch off the mains or disconnect the oven from mains.
2. Pull out the 5 buttons of timer. Might need to apply a bit of force but they should come out fairly easily.
3. Pull the two temperature adjustment knobs out.
4. The glass decorative plate is attached with some sort of clamps so if you pull it off the oven it should come off as well.
5. Take out the 3 screws on top of the oven above the wireing. You should be able to bend the metal panel up a bit.
6. Take out the 3 screws that secure the side panel by the front panel. You should bend the panel out here as well.
7. Now you should be able to see inside behind the timer unit. There are two clamps on each side of timer that keep it in place. From behind they can be pressed in so the timer can be pulled out towards the front.
8. Once done take a look at the wires that go into the timer unit. There are four: A, B, C, D. Disconnect all but make sure you mark them which is which.
9. You will not need wire A and B so put insulating tape on the metal connectors and let them hanging loose. The are the power source of the timer.
10. Cut the connectors off of wire C and D, and solder them together. Then put insulating tape over the bare soldered wire. The timer is now cut out of the circuit and can only be switched on/off by the temperature adjusting knob.
11. Tuck the wires back into the appliance making sure they are loose and well placed, possibly far from the oven side.
12. Lock the timer back in place if you want. It is going to be a dead weight doing nothing so it is not necessary to put it back.
12. Assemble the coverings in reverse order as described above.

You should be a working oven now with the annoying bit removed and being better off a few hundred quid.

Jul 21, 2011 | Ovens

1 Answer

My GE wall Oven Model #jctp18ba1bb is not working.the board is blankm the only thing that works is the oven light.Is there any kind of thermal fuses etc. in this oven.thge control board was replaced 8...


When you say board I assume you mean the electronic clock/timer. This timer directly affects the oven operation. Even if the internal oven fuse is blown or the thermal overload is tripped the electronic timer and oven light will always work. If the oven light works and the electronic timer/clock does not I'd say that the timer/clock is faulty.

Feb 10, 2011 | GE Profile 30" Built-In Single Electric...

1 Answer

My new neff oven b1524 dosn`t get hot the lights are on timer works but no heat??


Hi.
If it is a fan assisted oven, and the fan is working o/k, then you to replace the oven heater element.
Please rate my solution.
Thanks.

Oct 24, 2009 | Neff B1421 Electric Single Oven

1 Answer

Stove-top works, oven showing all 888888 across the screen


You're stove must be perfectly fine, but the thing displaying all those options may have a problem. Try to get this fixed as soon as possible.

Jan 31, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Where is the reset button


Hi.
thanks for request re your gas oven,unfortunately ,I have no experience of gas ovens, and am therefore unable to help solve your prob.
Check the experts, and see if there is one who is conversent with gas ovens.. Once again , sorry.

Jan 10, 2009 | Electrolux EOG7330WN Gas Double Oven

1 Answer

Automatic button on lower oven


This is how I reset my U1420NOGB/FD7907 NEFF double electric oven that I inherited also without an instruction book.
There are 4 buttons in a row and then a timer knob that moves left and right.The first button is black,second has an arrow,,third has an arrow and fourth a hand symbol on it.Hold down together, the black button and the arrow button next to it.Without releasing either,twist the timer knob clockwise(to the right)until correct time is showing.Do not release the other buttons at all ,until time is ok.If you miss correct time keep going ,dont go backwards.When time is correct,,release black and arrow buttons and auto will stop flashng ,and oven work.If auto doesn,t stop flashing at this point press the button with hand symbol (manual)on it once.

Aug 27, 2008 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

852 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...