Question about GE Profile Spectra JGBP90 Gas Kitchen Range
The last time I posted was in August, 2007. The problem still persists with my GE Profile Spectra JGBP85WEB5WW. My husband did replace the oven igniter back in August, 2007. The broiler ignites and works well. It seems as though the problem with my oven really hasn't been fixed. When I turn on the oven, it seems to take forever to reach proper temperature. On rare occasions, my oven seems to reach the desired temperature in about 15 minutes compared to the 25-30 minutes it usually takes. Sometimes, I even smell gas. About 20 minutes after starting my oven last night, I smelled gas and noticed that the temp was only at 100. I turned oven off and started the broiler. Kept the broiler on for 5-10 minutes and then turned oven back on. Temp read 242 and stayed and would not increase in temp. So I kept alternating by turning on the broiler and then the oven to try to finish cooking my dinner. At one point the oven did reach 350 degrees. This went on for about 1 1/2 hours and still my dinner was not completely cooked. It was hot but not hot enough to melt the cheese in my lasagna. I don't know what to do any more. My husband insists on fixing the problem himself, but doesn't know where to start. Some one said it might be the gas valve. If so, where would the gas valve be located on the appliance?
When I used m oven a couple of days ago to bake a cake, it did reach the desired temperature but it took some time before it got to the desired temp. And it took a lot longer for my cake to bake.
Any help anyone can give would be greatly appreciated.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
F4 Error indicates
a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is
bad and should be replaced. To solve this issue test the oven temp. sensor, it
should read between 1080-1120 ohms, if the rating is more then that and the door
appears to be closing fine then it is the control board that is bad and should
be replaced. Hope this helps...please post back for further assistance.
Aug 28, 2011 | GE Profile Spectra JGBP90 Gas Kitchen...
Nov 22, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Oct 02, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Aug 31, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Dec 19, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...
Nov 10, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...
Jul 15, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...
Oct 04, 2016 | GE Profile Spectra JGBP90 Gas Kitchen...
Dec 16, 2014 | GE Profile Spectra JGBP90 Gas Kitchen...
766 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: