Question about Yamaha RXV367 Receiver

1 Answer

I HAVE BOUGHT AN RXV367 A FEW WEEKS AGO. IT IS SET UP WITH A VIRGIN HD+ BOX, BLU-RAY & TV. THE PROBLEM I HAVE IS THAT WHEN WATCHING PEOPLE SPEAKING, THEIR VOICES ARE NOT IN SYNC WHEN CONNECTED.IF I CHANGE THE SETUP TO WORK THROUGH THE TV SPEAKERS INSTEAD OF THE AUDIO IT IS OK. I KNOW YOU CAN ADJUST THE LIP SYNC, BUT I'M NOT SURE BY HOW MUCH.CAN YOU HELP?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,546 Answers

It's the nature of the beast. The TV has to process the digital video bitstream more than the receiver has to process the audio so the result can be a gradual lagging of the video behind the sound...

http://en.wikipedia.org/wiki/Lip_sync

Some receivers have a sound delay control which you can use to try to sync them up. You didn

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I start watching Netflix on my hitachi smart TV


Open the Netflix app and sign in to your account!

Dec 24, 2016 | Netflix

2 Answers

Why is there no power to DVD box?


Check your power cord and plug for damage, do a wiggle test with DVD plugged in and see if it comes on while moving and bending wire plug. press the helpful button

DVD power supply repair tips

Press Release Consumer Electronics Video Audio Camera TV


DVD Player Repair Guide Covers Every Detail

Jan 26, 2016 | Televison & Video

1 Answer

My Vizio LCD TV screen fades to dark. Sound stays on.


I w having this same issue when watching a Blu-Ray disc. I found it to be dependent upon what picture mode the TV was set to. By this I mean certain picture modes would cause the TV to dim during dark scenes of a movie. Changing the picture mode helped a lot.

Feb 28, 2010 | Vizio VW42LF 42 in. LCD HDTV

1 Answer

Have a 3-4 yearold pro view hd tv, just bought a blu ray player, when i hhok up the player to the tv using the hdmi, i get a red picture that will not go away, tried several hdmi connecters, but nothing...


That's an incompatibility issue between the blu ray player and the TV. I would check on the Proview website to see if there is a firmware update if its possible on your TV. If the TV doesn't have one or is not capable of updates then you will need to connect the blu ray to the TV via component cables. Please take a few moments to rate my answer. Thanks...

Nov 20, 2009 | Televison & Video

1 Answer

No sound from speakers when tv is on


It is likely that you do not have an HDMI cable connecting your cable/satelite set top box to the reciever. If you you run coxial striaght to your TV you will need a digital tuner and run the audio componet cable to the receiver and picture cable to the TV. Also be sure that TV out is perferably with optical audio. Hope this helps. If not its all listed simply in the owners manual. Try Sony's website if you lost it.

Apr 05, 2009 | Sony HT-SS2000 Theater System

1 Answer

Sharp Aquos 37" Audio Static Issue when watching DVDs


i have had to replace the hdmi input board on these units to fix them.

Jan 08, 2009 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

3 Answers

No picture from samsung blu-ray to samsung TV


Put the blu ray player into the tv to see if you get a picture,if you do put it back into the amp then assign the hdmi input you have used in the amps set up menu,if you did not get a picture when hooked up to the tv run a cable from the video [yellow] out put to the video in put on the tv and then set the out put of the blu ray player.

Hope this helps.

CABLE GUY.

Nov 16, 2008 | Electronics - Others

1 Answer

Poor signal bush hd set top box


I have a saterllite reciver just bought a bush hd freesat top box i am running my virgin cable tv through my samsung hd television i put my satallite cable in to my bush top box connect the hdmi cable to get the freesat turn my virgin box off source the hdmi cable on tv get the freesat logo but nothing else what am i doing wrong

Aug 31, 2008 | Televison & Video

3 Answers

How to play ps2 games on pc


there is the software called pcsx2 software which allow to play ps2 cds on pc

Dec 18, 2007 | Computers & Internet

Not finding what you are looking for?
Yamaha RXV367 Receiver Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76173 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...