Question about Canon PIXMA MP810 All-In-One InkJet Printer
Printing with an empty ink cartridge may cause printer malfunction. U051 / U052
U053 / U059 The ink cartridge may not be set properly, or an ink cartridge not supported by the printer is installed.
Install the proper ink cartridge.
If one of the ink cartridges is missing, this error will occur. U075 / U076 The ink cartridges are not installed in the proper position. Install each ink cartridge in the proper position. U140 An ink cartridge not supported by the printer is installed.
Install the proper ink cartridge. U161 / U162 A used ink cartridge may be installed, or the ink cartridge may be empty.
Replace the ink cartridge.
By pressing the OK button, printing can be done without replacing the ink cartridge. However, the remaining ink amount cannot be detected properly, so the function to detect the remaining ink amount does not operate. READ/WRITE MODE Since the memory card is currently write-enabled, printing is not possible.
Set READ-ONLY MODE ON. NO PHOTOS ON CARD Some images in the memory card may not be in a supported format. images listed below cannot be printed directly from a memory card. Print them from a computer.
The waste ink absorber is a part inside the printer, which absorbs ink used in the cleaning operations, etc. CHECK PRINTER Turn the printer off, and remove the power plug from the outlet.
About ten minutes later, plug it in again, and turn the printer on.
If the problem is not resolved, the printer may require servicing. Please contact your local Service Center.
Posted on Mar 27, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken .
Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.
Thank you for using FIxya
Sep 05, 2011 | Canon PIXMA MP810 All-In-One InkJet...
Jul 19, 2011 | Canon PIXMA MP810 All-In-One InkJet...
Jul 07, 2011 | Canon PIXMA MP810 All-In-One InkJet...
Apr 04, 2011 | Canon PIXMA MP810 All-In-One InkJet...
Sep 05, 2010 | Canon PIXMA MP810 All-In-One InkJet...
Feb 02, 2010 | Canon PIXMA MP810 All-In-One InkJet...
Jan 11, 2010 | Canon PIXMA MP810 All-In-One InkJet...
Oct 30, 2009 | Canon PIXMA MP810 All-In-One InkJet...
Mar 22, 2009 | Canon PIXMA MP810 All-In-One InkJet...
Dec 29, 2008 | Canon PIXMA MP810 All-In-One InkJet...
Jun 30, 2015 | Canon PIXMA MP810 All-In-One InkJet...
589 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: