Question about SMC EZ Switch SMC-8024L2 24-Port Gigabit
Looks to me like they never implemented the serial port. The used unit I just obtained has no signal on the serial console pins and no SMC documentation beyond plugging it in appears to exist. Likewise with TELNET access.
However you can reset the switch to factory defaults with the following procedure from a pop-up window off the login page. It worked for me.
If you have forgotten the administration password you can return the Switch to its factory default state by doing the following:
1) Remove the power cord from the back of the Switch.
2) Remove all cables from the front-panel ports.
3) Connect port 1 to port 2, on the front panel, using a standard network cable.
4) Reconnect the power cord to the rear of the Switch.
5) Wait at least 40 seconds before disconnecting port 1 from port 2.
After completing this procedure, the password will be 'smcadmin' and the network address will be returned to the default; 192.168.2.10/24.
Posted on Aug 14, 2013
SOURCE: How Can I reset the
hi there Ramesh -- please rate me command. Default Setting None Command Mode Privileged Exec Command Usage This command resets the entire system. Example Console#reload
i believe i have what you asked for .. read on
i found the following information
a 2 page overview for this item
home page for this item
This example shows how to reset the switch:
System will be restarted, continue ? y
i hope this helps you
This command resets the entire system.
Posted on Nov 05, 2010
Tips for a great answer:
Apr 29, 2012 | Motorola AP 6532 Access Point
May 05, 2011 | Belkin (54G F5D7230UK4) Wireless Router
Jan 01, 2011 | Computers & Internet
Nov 03, 2010 | EnGenius / EOC-8610 EXT / 54Mbps /...
Jun 20, 2008 | D-Link DES-3226L Networking Switch
Jan 30, 2007 | Extended Systems Pocket Print Server
Sep 16, 2006 | Symbol ES 3000 (ES3000PWR10WW) 24x10/100...
4,457 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: