Question about Dryers

1 Answer

I have a siemens ultra sense dryer and has started to show a code E01 I have checked the hose and cleaned the lint out I always clean the lint filter what next. It automatically shuts off and sends that code.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 552 Answers

Hello,

This means there is an air flow issue most likely. Try running the dryer without the vent connected. If the dryer runs, the vent needs to be cleaned in the wall. If the dryer still does not, the thermistor on the front bulkhead will probably need to be cleaned or replaced.

Posted on Apr 13, 2011

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ultrasense dryer sending lint filter red light, E01 message and it is beeping after starting to dry.


Try unplugging for a _full_ 24 hours. If problem still exists, bad computer board.

(I feel like I should copy this answer to a notepad and paste it every time I see these questions. This is why I avoid computerized appliances like the plague. Owning such appliances is _truly_ worth having extended warranties).

May 18, 2015 | Dryers

2 Answers

The tumble dryer is working perfectly and is vented through the external wall with a plastic hose , however the dryer is producing high moisture levels we have checked the connection fro the dryer to the...


Your problem is probably a heavy lint build up in the Dryer or Hose.

Check your blower system on the dryer for a heavy lint build up, also remove to clean or vaccum or whatever is necessary to clean the plastic tubing because they will still flow some air, but be really plugged up with lint and could cause a dryer fire.
This is a free answer, Please rate me

Apr 11, 2011 | Dryers

1 Answer

Hi Our Bosch dishwasher (sms63e09uk) has E:01 displayed on the digital control panel. What does this mean and how do we rectifiy the problem


It means the machine is not getting enough water you need to replace the water inlet valve, that is very possible try cleaning it and see if that helps.If it does not then the problem is the water valve.Which is a very common problem.


This air flow error code refers to the dryer vent. This can refer to the dryer's lint screen, the thermistor behind the filter, or the vent itself could be clogged.
In order to determine which one is the problem we will need to gather some information.
1. Will water pour through lint filter's mess?
2. Outside where the unit vents on the side of the house can you feel air coming out?
3. Is the vent hose on the backside kinked or clogged?
4. Obstruction on vent housing outside (if screen is present on outside remove right away this is a fire hazard.)
Water should pour through the lint filter easily. Fabric sheets will put a layer of wax on the lint screen causing the dryer air circulation to be cut off. We should be able to feel warm, moist air at the vent outside. If air is not present you are in need of a dryer vent cleaning. A kinked or clogged vent hose can also cause the E01 error code. Ensure the vent hose is clear and placed in position with as few bends as necessary. When the vent is clear the E01 error should clear itself upon start up.

Hope helps.

Apr 02, 2011 | Bosch Dishwashers

1 Answer

E:01


Hi,


Check for the following if you get "E01" error message
1. Check for the vent hose whether it is clean which is less than two feet (to outside).

2. Check for the temperature sensor probes one in back at heating element and one in front by the lint filter for the temperature rises resistance increases on both of them and vice verse.

3. Check whether the unit has been grounded.

4. Check for the element that turns off and on during drying process.

5. When first starting and dryer is cool it will dry one load of clothes, it also seems to work for at least the first part of the cycle, until clothes began to get dry then it over heats. display shows E01 and will not run until it has set for about an hour.


Thank you!

Jun 21, 2010 | Bosch Nexxt WTMC 3300 Electric Dryer

1 Answer

E 01 display and beeping


Hi
Check for the following if you get "E01" error message 1. Check for the vent hose whether it is clean which is less than two feet (to outside). 2. Check for the temperature sensor probes one in back at heating element and one in front by the lint filter for the temperatur rises resistance increases on both of them and visa versa. 3. Check whether the unit has been grounded. 4. Check for the element that turns off and on during drying process. 5. When first starting and dryer is cool it will dry one load of clothes, it also seems to work for at least the first part of the cycle, until clothes began to get dry then it over heats. display shows E01 and will not run until it has set for about an hour.
Thank you!

May 09, 2010 | Bosch Nexxt WTMC 3300 Electric Dryer

2 Answers

Ge DRYER dpgt750EC2PL back wall of drum gets very hot. Occassional smell as if something starting to burn. How do I open the top lid to get inside to find out problem


This may sound a bit over simplified but when a dryer starts to get hot inside it is a sign of an airflow problem.

Start with the outside vent flapper. Check to see if there is lint build up on the flapper / louvers.

Pull off the vent hose and check for lint build up. If the vent hose is a flexible plastic hose they have a tendancy to clog with lint in the sprials and then the lint contines to build up until airflow is restricted.

After checking external vents and ducts next remove the lint filter. If you use dryer sheets wash the filter with white vinegar to remove the build up. It may appear clean but the material from the dryer sheets clogs the filters.

In the area around the lint filter check the ducting / air passages for lint build up and clean it.

In the process of all the cleaning do NOT use anything sharp. A vacuum crevice tool and a Looped metal coat hanger do wonders for cleaning assistance.

Before you reconnect the dryer vent try running the dryer with a light load of anything wet to see if it drys properly with the vent disconnected. After that reconnect the vent and repeat the same drying test to see if the drying times are close to the same.

This should solve your hot dryer problem.. If it does not then respond here and we can talk about taking your dryer apart.

Thanks for using FixYa.

Kelly


the air flow out of the dryer it should be a very high volume.

Mar 15, 2010 | GE Profile Harmony DPGT750EC Electric...

2 Answers

Bosch Nexxt 500 series gas dryer lint building up inside dryer


Get a long brush they have ones made for this chore proably at Ace hardware.

Aug 06, 2009 | Dryers

3 Answers

Bosch Nexxt 800 series dryer E01 error


My wife has a Bosch Premium dryer that had drying problems. The lint filter would get cleaned but the machine still did not operate correctly, as you explained above. Her machine was made in 2005 and the lint screen, the plastic slotted unit in front of the lint filter was the problem. It gets clogged up with hair/lint that never makes it to the filter. I tried a shop vac to vacuum it but the problem was still there. Get a pistol cleaning kit for a 22 cal gun. Pull the lint filter out & then take the pistol rod and insert it from the drum side into each slot and pull out the tons of lint. Pull the lint off the rod when done and take a flame to burn the rest off as the rod is a brass brush with small wires on it.

Jun 14, 2009 | Bosch Nexxt 500 Plus Dryer

2 Answers

E-01 error code


hi there,

i understand your frustration here.

the E01 code means there is reduced airflow through your dryer and therefore before it overheats and starts a fire, it shuts down.

replacing boards and sensors will not fix this problem as it has nothing to do with the electronics or electrical side.

here is what you can do yourself:

check the venting on the dryer.
the vent hose runs from the back or side to the wall of your house.
it may be clogged or kinked

if everything is fine, i would contact Bosch directly and see if they have a recall or any service reports on this problem and if there are any solutions.

let me know if i can be of more assistance.

thanks.

Mar 02, 2008 | Bosch Nexxt WTMC 6300 Electric Dryer

1 Answer

Clean lent filter sign shows and won't let it run. power is on and have manually checked the vent hose, exterior exit. still won't work Clean Lint Filter Indicator Light Flashes but my lint filter is...


check for wires near lint filter casing. these are the lint filter sensors, they could be defective that is why it always indicate a clean lint filter alarm,

Feb 19, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Mike

Level 3 Expert

4368 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...