Question about Epson AcuLaser C1900 Printer

1 Answer

My Printer Alert "Service Req

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 56 Answers

E086 is an ADC sensor error, it is usually caused by a piece of paper caught between the rollers of the photoconductor/IDT unit. Open the front cover, operate the latch inside the handle & turn the handle to the bottom position. Pull the handle to draw out the IDT unit until it stops. Gently lift the orange handle on top of the unit to remove the PCU. Treat these parts gently and avoid shining bright light at them as they are very sensitive. Check for & remove any paper and clean any toner spills with a soft cloth or air duster being careful not to scratch the delicate surfaces. Reassemble in reverse order. Hopefully all will now be well, please take a moment to rate the success of this suggestion.

Posted on May 03, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service req 0001001C


SERVICE REQ - 0001001C - FS origin (Suction fan shutter home position) error

Jan 18, 2013 | Epson Stylus Pro 10600 InkJet Printer

1 Answer

PRINTER SHOWING 'SERVICE REQ E300'


Sadly this is a serious error requiring a replacement Laser Unit - if you are lucky. It may also be a system board error that is falsely reporting the error.

This printer is likely to be beyond economical repair.

Aug 22, 2012 | Epson Aculaser C3800 Transfer Unit

1 Answer

My printer is Epson stylus pro 4880c. when i start my printer printer shows a massage "service req 00010028" and all the indicators starts glowing.


THIS MESSAGE APPEARS WHEN THE PADS OF THE PRINTER BECOME FULL, YOU HAVE TO REPLACE THE PADS FOR THIS BETTER CALL THE TECHNICIAN

Jul 31, 2011 | Epson Stylus Pro 4800 InkJet Printer

1 Answer

HI MY NAME IS RALPH I HAVE A PROBLEM WIHT MY PLOTTER EPSON 9600 IN DISPLAY SAY SERVICE REQ 001002D WHAT IS THIS???????


Hi mofeed1400 ,

the message " SERVICE REQ 001002D " simply means that some service is required.
call the service centre for " Epson " in your area and get it serviced.

or take your printer to the store where you bought it along with your receipt and ask them that you printer is in need of service.

i hope this helps.

May 16, 2011 | Office Equipment & Supplies

1 Answer

My epson c2000 printer have a "service req e033"


Because the Epson AcuLaser Color 2000 was made for Latin America, there's not much information that I can give you concerning your Service Error Condition. All I can tell you is that the Service Request error # E033 is an Engine Related Service Call Error Message for OHP Detection Sensor Malfunction [abnormal condition]. Check to see if the windows on the OHP sensor are dirty and clean OHP sensor window and the OHP sensor reflective window. I'm sorry, but I can't even tell you where the OHP sensor is located, or anything else about it. If you cannot figure it out using your Owners Manual/Users Manual, you can always e-mail Epson Technical Support for possible help or advice, at epson.com

Mar 10, 2011 | Epson AcuLaser C2000 Printer

2 Answers

EPSON AcuLaser C1900 with Error "Service Req E020"


ERROR CODE: E020
“SECONDARY TRANSFER VOLTAGE CONTACT/RELEASE PROBLEM”
Solution
�� Electric parts which can cause the trouble:
• Transfer Roller Pressure Solenoid (SL2)
• Transfer Roller Pressure Position Detection Sensor (PC7)
• Engine Board (PWB-A)

May 18, 2009 | Epson AcuLaser C1900 Printer

1 Answer

Epson stylus pro10000 problem service reg


SERVICE REQ. 00020000:NVRAM ERROR
SERVICE REQ. 00020001:NVRAM COMPARISON ERROR
SERVICE REQ. 00020002:SDRAM ERROR
SERVICE REQ. 00020003:FLASH MEMORY ERROR
Problem
Abnormal detection in a corresponding element
Solution
1. Once save parameter to Flash memory card and install it to the printer again.
2. C362DRV board. replacement

Feb 18, 2009 | Epson Stylus Pro 10000 InkJet Printer

1 Answer

Error in printer


" Service Req E 0003" means that your printer needs to be serviced. Pls contact your service provider.

Jan 27, 2009 | Epson EPL N1200 Laser Printer

1 Answer

Espon Aculaser C9100


E086 is an ADC sensor error, it is usually caused by a piece of paper caught between the rollers of the photoconductor/IDT unit. Open the front cover, operate the latch inside the handle & turn the handle to the bottom position. Pull the handle to draw out the IDT unit until it stops. Gently lift the orange handle on top of the unit to remove the PCU. Treat these parts gently and avoid shining bright light at them as they are very sensitive. Check for & remove any paper and clean any toner spills with a soft cloth or air duster being careful not to scratch the delicate surfaces. Reassemble in reverse order. Hopefully all will now be well, please take a moment to rate the success of this suggestion.

Oct 29, 2008 | Epson AcuLaser C1900 Printer

2 Answers

Error c0998


That what service manual says:

Service Req xyyyy
A Controller error or print engine error detected. Turn off the printer. Wait at least 5 seconds and then turn it back on. If the error message still appears, write down the error number listed on the LCD panel (xyyyy) and turn off the printer, unplug the power cord, and contact a qualified service representative

Apr 29, 2008 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Epson AcuLaser C1900 Printer Logo

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...