Question about Samsung SMH9187ST Microwave Oven

6 Answers

My Samsung Microwave gives an error code -SE-.

Posted by on

  • 11 more comments 
  • damy331
    damy331 Nov 07, 2012

    thank you very much for providing sears contact details. I was going crazy trying to find the sensor without luck until I read your comments. I just order it and waiting to receive

  • aklimenko
    aklimenko Nov 08, 2012

    Sumsung sucks. I bought Samsung microvave SMH9187ST just a little over 1 year ago and now it is dead with error code -SE- (or -5E- ?). Support technician on chat said that this can happen when you press 2 buttons simultaniously If this (pressing 2 buttons) can break expensive product, Samsung should be ashamed and shood stopp selling this product to public. I will never buy anything from Samsung again. Anatoliy Klimenko, Potomac MD

  • Diane Jun 04, 2013

    Purchased samsung SMH8165ST in Oct 2009. have had the SE code problem for a few month now. Resetting worked at first. Then the light started flasing on & off along with the beeping...would not reset. Out of frustration I called Samsung. I was told they are aware of the problem & would repair in the "epidemic warranty". Repair man just left. It took him about 15 minutes to change out the keypad. No charge!!

  • Don Gallagher Jun 12, 2013

    Call Samsung if you have this issue. They are replacing my panel for free and it's out of warrenty.

  • Michelle L Jun 19, 2013

    I just contacted Samsung as well regarding the same service error SE I have an OTR micro which I purchased in 2010 model SMH9151W. They are going to replace my control panel at no charge as well due to this "epidemic warranty". Thank goodness cause I certainly dont have the money to replace my microwave at this time and I use it almost all of the time.

  • Sharon Dreher Jun 28, 2013

    Can someone please tell me who to contact? I am having the same SE error I called Samsung and they told me I had to pay for the repair. Thanks!

  • Keng Seet Jul 12, 2013

    Thank you Michelle L. I just contacted Samsung after reading your post. They will send a technician over to fix the SE issue - free of charge.

  • Patrick M Aug 17, 2013

    I have the same Samsung microwave and have the SE error code (again). I took it apart. I unplugged the various wires from the board and used compressed air to dry out all of the connections. That worked for two weeks. Now I have the code again. The manufacture date is Oct of 2010. Do I have a chance of Samsung fixing this at no charge?

  • Edward Aug 18, 2013

    Did anyone have to pay for a control box instead of the key pad.

  • Keoko T
    Keoko T Aug 25, 2013

    I have the same problem with my micro. manufacturing date 2010 but I bought it about 18 mos ago. Because of the time they say there is nothing they can do, I guess that is the life span of a SAMSUNG. There is something I can do and that is to recommend others to NOT buy SAMSUNG!

  • Robert Stucker Oct 15, 2013

    I had the SE Code. I cleaned all the wiring connections to no avail. I had to buy the $35 keypad/touchpad, which is like a plastic skin with the ribbon cable going to the circuit board behind it. My microwave is now working and happy. I was worried because if that did not work, the parts store said the circuit board is "no longer available."

  • Michael Norris Dec 20, 2013

    I, too, have the exact same problem with my Samsung- I replaced the keyboard pad like most everyone else, but now the microwave doesn't come on at all- can anyone help me out with that? I rechecked all the connections, but am not sure about the second ribbon coming from the keypad- one fits into the socket on the ckt board, which is easy enough, but where does the second one go? From what I can tell, it just attaches to the plastic tab on the inside of the shell- is that correct?

  • Keamogetswe Sep 18, 2017

    My microwave is been on SE for months now how do I remove it???

×

Ad

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 794 Answers

Hi cbrophy91,

On Samsung microwaves the SE error code flashed on display means "Sensor Error". This means that your humidity sensor has shorted and needs to be replaced. You will need to uninstall the entire unit and remove the outer shell to access the sensor that needs to be replaced. It will be mounted somewhere around one of the vent on the cavity of the microwave. You may contact Sears for the replacement part at 1-800-252-1698; M-F 6:30 AM-10:30 PM - Sat 7:00 AM-9:30 PM - Sun 7:30 AM-9:30 PM - All times Central.

Hope this helps.

Thank you for using FixYa.

Posted on Jun 07, 2011

  • 4 more comments 
  • cetambert
    cetambert Jun 03, 2012

    GOOD NEWS! I had the same problem this morning. Bought mine 16 months ago and woke up this morning to the SE code. Looked in the manual and online. Unplugging it didn't help...holding down the cancel button for 3 seconds didn't help. I called Sears and they said it was going to cost me the same $270 whether I called someone to replace the circuit board on my own, bought a new warranty or replaced the unit. I was so angry I just hung up on him and started shopping for a new NON-SAMSUNG microwave. I looked at the blogs one more time and noticed someone said to hold the start and pause button at the same time for 3 seconds. I don't have a pause button but held the start and cancel button down. It took about 20 seconds, but all of a sudden it started beeping. I let go and everything is fine! I'm angry and relieved at the same time. Why wouldn't this fix be in the manual and/or on Samsung's website?

  • Eddie Senechal
    Eddie Senechal Sep 04, 2012

    Thank You it worked

  • Steve Power Sep 11, 2012

    we ran a blow dryer over the circuit board rather than unplug everything. worked like a champ!

  • Rosanne Ray May 28, 2013

    Just had mine go out this weekend. Thank you so much, I tried the blow dryer first and it worked great

  • Tony Snedgen
    Tony Snedgen Aug 06, 2014

    I exposed circuit board and used blow dryer and is now working

  • Gary Oct 22, 2019

    Where is the circuit board located? I have the exact same problem. Happened after I replace the handle. Imagine that.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thank you!!!! I didn't find moisture but discovered that my panel was dislodged. I unplugged all the connections, realigned the panel and plugged everything back in...... it worked again!!!! Followed the following directions:

  • By My Samsung Microwave gives an error code -SE-. - avatar3.jpgbcoonstx348 Jan 21, 2011
  • I am a housewife that NEVER touches this stuff...but I fixed this one myself! Take off the top front vent (two screws on top) Then there is one screw above keypad panel. Take that off and CAREFULLY pulled back key pad panel. I then carefully unplugged all connections making sure I could get them back where they belong. I noticed some moisture and used condensed air to carefully blow it all out. Then I let it sit open over night to air out. Put it back together, plugged it in...and yippee it works like a champ now....hope this helps...atleast worth a try to start with.

Posted on Jun 14, 2012

  • 11 more comments 
  • andynjane
    andynjane Aug 27, 2012

    I just took your advice - disasembled - no real sign of moisture - took circuit board off, lifted teh metal frame as much as I could (it wouldn't come all the way out easily and I didn't want to force it), then blew compressed air underneath. I didn't let it sit out overnight. Just put it all back together, plugged it in, and no -SE- code! We'll see how long it lasts, but, as you said, it was worth the try. The whole thing took less than 45 minutes. Thanks!

  • Anonymous Sep 10, 2012

    Thanks, Peggy, worked for me too. I removed all connections and slid out the keyboard panel with its printed circuit board, which I left out in the sun for a few hours to dry thoroughly. Reassembled, and problem solved.

  • Anonymous Sep 10, 2012

    Uh, Patty that is. Sorry!

  • eric525
    eric525 Oct 06, 2012

    Thanks Patty and bcoonstx348. This worked like a charm for me. Saved me a lot of headache.

  • eric525
    eric525 Oct 06, 2012

    Thanks Patty and bcoonstx348! Your solution worked perfectly for me. Saved me a ton of headache.

  • Bill Nov 10, 2012

    This worked for me as well-- Thanks! Our problem first started when we boiled water underneath the right side of the microwave and steam got into the sensor. The popcorn button activated and the microwave turned on and then we got the S5 code. I removed everything like Patty said (which was easy- even for me), disconnected the panel and ran the blow dryer over everything. I put it all together and it works perfectly... (for now)

  • keith_taggar
    keith_taggar Feb 02, 2013

    This worked for me as well-- Thanks! Our problem first started when we boiled water underneath the right side of the microwave and steam got into the sensor.

  • Manish Sep 02, 2013

    Thanks Patty n team, it worked for me too. I remove the circuit, unplugged all the cables from the circuit. I don't have blower at home, so I dryied and circuit keep it in A/C room and using the dry mode. As extra step I also placed the complete microwave in front of A/c . After two hours, I connected all the cables to circuitboard and it started working. It worked perfectly now. Also my wife gave me a good kiss for the brilliant work. All thanks to Petty n team...

  • Brother Rodney Sep 07, 2013

    Thank you Patty....we had the same problem with the "SE" error

  • Brother Rodney Sep 07, 2013

    I got lazy and just tried to use the hair dryer without disconnecting the power cables from the function box. Worked for like 5 minutes and the error came back. NOTE: you have to disconnect the cables, blow dry the function box. let it all sit for about 6 hours and then reconnect. Been 24 hours now microwave working fine!

  • Dayna
    Dayna Nov 12, 2013

    Awesome fix advice! I followed bcoonstx advice, unplugged all on the back touch pad panel, air dried on "cool" setting with my hair dryer, plugged back in. All working great, as new! Thanks for your forum(s) and input! I was prepared to purchase a new micro, just canceled that order! Saved me $$$. :)

  • Donna Parker
    Donna Parker May 15, 2016

    Awesome fix thank you,thank you thank you! I had popped two bags of popcorn back to back and I believe this is what caused the problem. I checked the manual and it says to wait at least 5min between pops to give the moisture time to evaporate. Who Knew!

  • Anne Bloomenthal
    Anne Bloomenthal Jan 25, 2017

    THANK YOU!!! I just unscrewed and pulled out the key panel and let it sit for a couple hours open to the air. Plugged it back in and it was working. Without either any unplugging or any active drying.
    EDIT: After only a couple hours of being open to the air, once I closed it up it stopped working again, but after being open overnight it's been working fine.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just called Samsung and the tech support person I spoke with said mine (was purchased in 2010) was manufactured during a time when there was an issue with the circuit board, so they extended the warranty on the sensor board and are sending someone out for free to look at it. We will see!

Posted on Aug 06, 2013

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When I encountered this error, it had been about 18 hours since I used the stove. I had two burners going, both generating some steam. So, it is very well possible that moisture IS creating this problem, as others have noted. I have had my microwave for about 2 years, and today was the first time for this issue. Instead of removing the front panel, I figured maybe the moisture had dried out by now. I unplugged the microwave for about 10 seconds and then plugged it back in. TADAH!! Back in business. So if you're patient, and can do w/o your microwave for a day or so, this might work for you. Otherwise, it looks like a manual drying method on the back of the electronics panel should work. Good luck!

Posted on Jul 24, 2013

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have no idea how my son worked this out but he pressed every key on the key pad in order left to right, each row, missing out the number keypad, then pressed reset/cancel and the error cleared itself. It worked perfectly for two weeks when the error occurred again. He followed the above procedure and again the microwave works.

Posted on Feb 20, 2016

  • Anonymous Mar 09, 2017

    Worked for me too! So happy I found this solution!

×

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Thanks to all who commented. I held down the start and stop buttons for about 25 seconds. Jumbled letters apppeared but when I let up it was all ready to go.

Posted on Jan 25, 2015

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: My Maytag microwave has error code "SE" on the

SE error means you have a shorted membrane keypad.

The full model number would be MMV1153AAB or MMV1153AAW and denotes color.

On this model, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly ("control panel/switch" as it's called) which comes with a new keypad.

It's actually a pretty easy do it yourself job.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Next, disconnect the strip as shown in the photo below, then remove the screws that hold your circuit board in the old frame.

40716d4.jpg

Some connectors have a lock:

microwavesvc_33.jpg

Then carefully (since the display is made of glass) move your circuit board to the new frame, and reassembly is the reverse of disassembly.

You can get the part from the Pros here. They're our favorite supplier.

You can also find helpful exploded view diagrams at that link.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Apr 29, 2011

KevinWhite

Kevin White

  • 1902 Answers

SOURCE: I have maytag over the

Hello & Welcome to FixYa
SE or 5E means shorted keypad and to solve this problem the keypad needs replacement,
PART NUMBER: W10258190. Please get back to me if you have any other questions.
Kevin

Posted on Aug 10, 2011

remmi28

  • 1 Answer

SOURCE: My samsung microwave model SMH718 keeps showing an

I had the same problem, I changed the daylight savings time on mine and it worked untill summer, then it happend again. Finally mine quit working altogether. P.S. when this first happend samsung didn't even know what the error coded meant. It is an engineering code, meaning service engineer I believe. If it is beyond the year warranty your hosed, it would cost so much to try and fix your better off buying a new one.

Posted on Dec 07, 2010

MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: My Samsung microwave is giving

SE error means you have a shorted membrane keypad.

We would need the full model number with any suffix in order to provide you with free assistance.

It is usually found on a tag located inside the cooking cavity or around the door frame or controller frame.

Since FixYa is still not notifying us when you respond to clarification requests, you will have to post a new help request with your model number and symptoms / questions or eel free to contact us directly here for free help.

Sometimes it's a simple DIY job to fix this.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Sep 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix E5 code for Samsung Microwave


About 64,200 results (0.62 seconds) Search Results

    Fixing a broken Samsung Microwave - The dreaded 5E ...

    ? 4:30
    https://www.youtube.com/watch?v=_yWSU0kTkTg
    Mar 20, 2013 - Uploaded by Joe Devlin
    When my Samsung Microwave was just over a year old it failed giving me an "5E" or "SE" Error code which ...

    Samsung Microwave SE (5E) Error Fix - YouTube

    ? 9:23
    https://www.youtube.com/watch?v=YubSrHE7WFc
    Dec 7, 2012 - Uploaded by eric hatch
    I had pretty much decided to throw it away since the cost to fix it by a ... Fixing a broken Samsung Microwave ...

    Samsung Microwave SE Error FIX! - YouTube

    ? 1:33
    https://www.youtube.com/watch?v=oPQE2oLTR3o
    Jan 26, 2014 - Uploaded by jjthetechguy
    I am not responsible for any damage done to your microwave*** ***Do at ... Fixing a broken Samsung ...



Jan 27, 2016 | Samsung SMH8165B Microwave Oven

1 Answer

SAMSUNG MICROWAVE SHOWS SE AND WILL NOT WORK.WHY?


SE is an error code for a shorted keypad, although the keypad might not really be shorted.

Unplug the oven for a few minutes to see if it clears the error code. If not, then leave it unplugged over night. If the problem persists, then you probably do have a shorted membrane switch on the keypad.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Aug 29, 2014 | Samsung SMH9187ST Microwave Oven

1 Answer

Oven shows -se- error,and now doesnt heat


Sorry but the -se- error code from the manual means:
An error of the oven may cause
low performance and problems
in safety. Stop using the oven
immediately.
Call local SAMSUNG service
centre.
Look for the 1-800 number on the back and give them a call.

Jun 10, 2014 | Samsung Microwave Ovens

2 Answers

Samsung microwave se error


see the video attached. God bless you

Dec 09, 2013 | Samsung MS1040BB Microwave Oven

1 Answer

Se error code


see the video attached, and fix it. God bless you

Jul 20, 2013 | Samsung SMH9187ST Microwave Oven

1 Answer

Se code


Contact Samsung for the SE error message. They are fixing my microwave for free today even though it is 4 years old. Model #SMH9187ST.

Feb 22, 2013 | Samsung SMH7178STD Microwave Oven

1 Answer

Samsung SE error code


Followed Timm Eckenroth's suggestions in a post from 08/02/2012
and it fixed the problem on my Samsung same model as his.I was a little skeptical at first ,followed all his steps ,put it back together ,prayed about it and it worked..Thanks to Timm and the ourLord..

Nov 12, 2012 | Samsung SMH9187ST Microwave Oven

3 Answers

Samsung microwave SMH8165W displaying error code -SE- and continuously beeps.


SE means system error, the keypad has a short in the membrane, or the control board has issues.

Jun 14, 2012 | Samsung SMH8165W Microwave Oven

1 Answer

My Samsung SMH7178STD gives me an error condition that flashes -SE- and beeps every so often but i can not get rid of the error condition. I have unplugged to perhaps reset it but it still flashes the same...


Hello :

SE error means you have a shorted keypad . If you couldn't find parts , then It will be cheaper to replace the unit or have new one .

good luck .

please rate !

Mar 30, 2010 | Samsung SMH7178STD Microwave Oven

Not finding what you are looking for?
Samsung SMH9187ST Microwave Oven Logo

63,040 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...