Question about Cell Phones

1 Answer

I dont kno the default 4ne code for my voda4ne 125 handset

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 81 Answers

Hi
Carefully reading user manuals help in most of cases :)

Just use Read flash option. After reading complete, SagemEG will show you phone code. If not success, there is another option to get code - sent flash.bin to Support@SagDD.com.
Here is log of reset to default , read eeprom n read flash

COM3 [VCP0] selected
Device: ZTE-225
Checking data, wait...
Action: reset
Boot...
Press Power button now !
Checking...
boot answer: 01
Boot Done
Set Baud...
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check free space...
flash chip supported
Check free space Done
Check parameters...
Check parameters Done
backup critical area...
Reading [eeprom-sta]...
file saved: backup_eeprom-sta_20080118-132834.B1E.bin
loading data...
wrong database file: z225_eep65535.cfg
error: can't load database[11]
Reading [eeprom-sec]...
file saved: backup_eeprom-sec_20080118-132834.B1E.bin
Reading [eeprom-dyn]...
file saved: backup_eeprom-dyn_20080118-132836.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
error: set erase range
error: set erase range
Write Failed
Finished, Remove/Install battery now !
Time used: 22 sec
COM3 [VCP0] selected
Device: ZTE-225
Checking data, wait...
Action: read eeprom
Boot...
Press Power button now !
Checking...
boot answer: 01
Boot Done
Set Baud...
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check free space...
flash chip supported
Check free space Done
Check parameters...
Check parameters Done
backup critical area...
Reading [eeprom-sta]...
file saved: backup_eeprom-sta_20080118-133742.B1E.bin
loading data...
wrong database file: z225_eep65535.cfg
error: can't load database[11]
Reading [eeprom-sec]...
file saved: backup_eeprom-sec_20080118-133742.B1E.bin
Reading [eeprom-dyn]...
file saved: backup_eeprom-dyn_20080118-133744.B1E.bin
backup critical area Done
Check memory...
Reading [eeprom-complete]...
file saved: backup_eeprom-complete_20080118-133750.B1E.bin
Completed
Finished, Remove/Install battery now !
Time used: 21 sec
COM3 [VCP0] selected
Device: ZTE-225
Checking data, wait...
Action: read flash
Boot...
Press Power button now !
Checking...
boot answer: 01
Boot Done
Set Baud...
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check free space...
flash chip supported
Check free space Done
Check parameters...
Check parameters Done
backup critical area...
Reading [eeprom-sta]...
file saved: backup_eeprom-sta_20080118-133815.B1E.bin
loading data...
wrong database file: z225_eep65535.cfg
error: can't load database[11]
Reading [eeprom-sec]...
file saved: backup_eeprom-sec_20080118-133816.B1E.bin
Reading [eeprom-dyn]...
file saved: backup_eeprom-dyn_20080118-133818.B1E.bin
backup critical area Done
Check memory...
Reading [flash]...
file saved: backup_flash_20080118-134506.B1X.bin
Completed
Finished, Remove/Install battery now !
Time used: 425 sec



I uploaded all files....

http://rapidshare.com/files/84702678/Vodafone_ztc-125_files.rar

Plz add this model in infinity software....Thx....for ratting

Posted on May 30, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have loss my nokia X2-00 security code 12345 code is not working plz help me


Get the imei of yo 4ne and calculate for its code by using the nokia master code software or send me the imei of that 4ne

Jun 23, 2014 | Cell Phones

1 Answer

How to reset your phone when you dont kno the password


You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Jul 26, 2012 | AT&T Cell Phones

1 Answer

I forgot my 4 number lock code and dont wanna go too the store


hi its very simple to reset ur phone just type 0000 or 1234 these are the default codes for resetting the codes in samsung of its nokia then the default codes are 0000 for vodafone and 7890 for virgin by default the nokia codes are 12345 was this useful if yes pls rate my solution and thanx for visiting fixya if u have further problems then describe ur problem in brief and specify ur handset name
with warm regards - bonefirediv.

Apr 18, 2011 | Cell Phones

1 Answer

I have a zte r100 and can't restore default settings. It's asking me for handset lock code, which should be default 0000, but is indicating incorrect password. I want to restore default settings because...


Menu > Settings > tab right to Handset > Restore Default Settings ... The default. Handset Lock Code is 0000 (unless you changed it). .... If you can't change the message service centre number maybe you can ask for a swap ...

Jul 14, 2010 | Lands Phones

1 Answer

Hi can u pls tel me hw can i retrieve the security code of my nokia handset? i entered the master code bt its nt accepting.. and i have forgotten wt i saved two years back.. thanx, monica


Monica,

try the default code for master code (how ever many digits it take put "0" zeros)
if the zeros dont work your default 12345...by default only

hope this works out for you

Jun 12, 2010 | Nokia 7310 Cellular Phone

1 Answer

I ACCIDENTALLY LOCKED IT NOW I DONT KNO THE CODE, CAN YOU HELP?


In order of severity: If your handset is asking you for a PIN, you will have a few attempts to get it right, before it locks up and asks you for a PUK code.
If your handset is asking for a PUK code, Call your telecommunications provider. They will be able to issue you with one (don't try too many times, as you will render the phone inoperable)
If you have used up all of your attempts to get in at the PUK code stage, you will need to ask your telecommuncations provider, or the handset manafacturer for assistance. They will probably ask for proof of purchase and may charge a fee. If a handset has gotten to this point, the phone will probably be rendered useless.
Best of luck

May 21, 2009 | Nokia 5320 XpressMusic Cellular Phone

2 Answers

Security code of tata indicom handset


i want security code to open setup menu of Tata-Samsung CDMA mobile phone(Model is old 1) ....dnt kno its model no..plz help me out of this problem

Mar 30, 2009 | TT Systems Lands Phones

1 Answer

Unlocking a ZTE Vodafone 125 GSM Handset


The reason why the phone is asking for a code is because its detecting a new sim. It's asking for a security code- every brands of phone has it for security everytime you insert a different simcard. If you surf at website of ZTE, try to log at their URL for security code reference. I'm kinda not familiar for the security code of your phone. Unlike Nokia handsets, its default security code is 12345. For Sony Ericsson, its 0000.
I hope my suggestion will help you with your problem. Good day.

Nov 13, 2008 | Cell Phones

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

William Alequin

Level 3 Expert

931 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...