Question about Philips Audio Players & Recorders

1 Answer

My Phillips HTS3520 plays DVDs fine and the sound is excellent. However, it is not playing the TV channels thorugh the theatre system.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

Without more data, I can only make some general suggestions.

First: Check your cables. If you are using a converter box, there must be a set of audio and video cables going from the cable box to the Home Theatre unit. These will be a yellow/white/red set of cables. Second: If these cables are plugged into "AUX1" or "AUX2" make sure this is what reads on the front of the HT unit. You already have cables going from the HT to the TV because your DVD works.

Although this sounds obvious (please forgive me-I am not underestimating you) IF your TV receiver is 6 years old or more, and you are NOT using cable or satellite, there will be nothing for your set to pick up since the conversion from analog to digital.

Posted on Jun 05, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No human sounds when playing dvds.


sound like the center channel is out
either bad connection at speaker or receiver is not putting out sound on center. A quick swap of speakers at receiver end will tell you if it is the latter

Apr 13, 2009 | Audio Players & Recorders

1 Answer

Trying to get the theatre to play all my gaming systems


then you have probably connected all wires from game system to your TV. what you need is, as I did in my case with a PS3, a optical wire from your game system to your samsung home theatre system. and also remeber to configure your game system to direct sound through the proper channel.

Mar 24, 2009 | Samsung HT-Z310T Theater System

1 Answer

Unable to get play dvd or get picture on DVD channell on tv


If the player is doing that for all DVDs but playing CDs properly, the player has gone bad due to either the laser and lens being out of whack or the DVD drive just doesn't recognise DVDs anymore and needs repaired or replaced.

Sorry. Best of luck.

Jan 01, 2009 | Philips Televison & Video

1 Answer

I hooked up a htz510 home theatre system to my tv and it sounds great when I play dvds. However, in pure tv mode, my tv plays through the tv speakers instead of the home theatre speakers. How do I fix...


if you use cable and have a cable box or sat. and have a box you need to get an optical audio cable and hook them between the to boxes. just did this with mine today

May 23, 2008 | Televison & Video

2 Answers

Not playing voice but playing music/surround


sounds like you may have a dodgy scart lead.check that none of the pins are loose/damaged. Also check the sound settings on the tv, it may have reset itself to the default sound setting. Or it might just be the audio settings on your dvd player have been adjusted,almost all dvd movies have there own audio adjustments.

Jan 13, 2008 | Audio Players & Recorders

2 Answers

Phillips Home Theatre System


to play discs from different regions on HTS3548:

Before you begin, ensure you have connected your DVD player to your TV and both have the power on. Once you have connected the TV, follow the instructions below.

-- Open the disc tray
-- On the remote control, press in sequence:
Disc Menu
Stop
7 3 4 4 6 6 0
OK
-- Make sure Region 0 is showing on the TV.

This should hopefully help!!!!

Jan 02, 2008 | Sony DAV-SA30 System

1 Answer

Denon Home theatre System


If TV has AUDIO OUT and you hook up AUDIO OUT from TV to AUDIO IN on your system, it should play.

Oct 06, 2007 | Denon S - SERIES PREMIUM HOME THEATER...

2 Answers

Phillips Home Theatre System


Once you have connected your dvd player to your tv and the tv is turned on. Turn on the machine and press "disc" on the remote control. Open/Eject the disc tray. Press STOP on the remote control. Enter the following numbers slowly on the remote control " 7,3,4,4,6,6,0". Configuration will appear on the bottom left hand side of the TV for three seconds. Press "PLAY" to close the tray. The DVD player eill return to normal operation. This SHOULD make the player Region free.

Sep 01, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Philips Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...