Question about GE Profile Spectra JGBP90 Gas Kitchen Range

Open Question

GE Gas Range Model JGB900SEPSS. Window has the following message that flashes: locked door. Unable to bake or use self cleaning function in upper oven. When i try to use the bake or self clean function the word door appears in the same window. I turned the power off for about a minute and a half but that did not clear this problem.

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: hotpoint 30" self cleaning gas range with sealed burners - no bake

It may be the ignitor, they can crack and you wouldn't even see. Good news is they are cheap ($5-20) and they are usually easy to replace. But before you replace it...

When set to bake, does the "oven cycle" light come on? If not, that means no power is being sent to the ignitor. Reason? There is a switch in the oven latch, to make sure a) latch must be closed for cleaning cycle and b) latch must be unlocked for baking. On mine, the switch button gets stuck, so even when the latch is unlocked, it thinks it is locked and will not allow the bake cycle to proceed. Cycling the latch a few times may free it, otherwise you'll need to replace the switch (not that hard but a bit of a pain to get to).

Posted on Nov 22, 2007

Ad

robert samples

  • 1314 Answers

SOURCE: GE Profile XL44 Spectra gas oven

try to hold down the light switch on the door set it up for another cleaning hit start when oven clean door lock showes hit cancel if that doesnt work try unplugging it for three min fyi the doors can take up to an hour to un lock after cleaning its so it dont burn your face off from the intense heat after cleaning some take 2

Posted on Feb 14, 2008

Anonymous

  • 1 Answer

SOURCE: GE Spectra XL44 Gas Oven, flashing "Locked Door". Can't use oven or close door

I had the same problem happen tonight. I have an XL44 self-cleaning gas range. We unplugged it for several minutes and pressed 'cancel' a bunch of times--neither worked. We finally lucked out--opened the oven door and pressed a black button on the upper left side of the front of the oven. It turned out the flashing words and unlocked our door. Weird. There was nothing in the manual about this...

Posted on Dec 28, 2008

Anonymous

  • 1 Answer

SOURCE: GE Profile XL44 Spectra gas oven

My Spectra XL44 suddenly refuses to ignite the baking portion of the oven - broiler and top work just fine. The day before it was working fine. Wondered if it was an electrical egnition problem - gas feed or what??? Help!! Mregressor@aol.com

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After self clean cylce the LOCK indicator remains in the dispolay and BAKE function will not work. door flashes in display when BAKE is pressed.


Hello. It sounds like the door switch is shorted and telling the main board that the door is still locked. This will prevent the oven from functioning properly. The door switch part number is 74009591. The manual door lock assembly is 74009764. The part number for the main oven control board is 74009777.

Aug 31, 2015 | Maytag MGR5752BDW / MGR5752BDQ /...

1 Answer

Kenmore Electric Range model 790 has F9 & F1 code error


Hi,
Before you go working too hard to get you oven to go into the self clean mode....check out this tip...


http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! "

Apr 20, 2010 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

Oven door after self clean cycle won't unlock


Both the oven" ON " light and " Clean " light will flash when the clean has finished . When the " clean " light flashes , slide the latch handle to the left as far as it will go , then turn the " OVEN SET " knob to " OFF " to open the door.

Mar 26, 2010 | GE Profile JGS968SHSS Gas Kitchen Range

4 Answers

Lost instructions - I have my oven cleaning how


Typical oven self clean cycle is 3 hours. Oven needs to cool down to under 550 degrees before door will unlock. Download a use and care manual at http://www.geappliances.com/service_and_support/literature/

Nov 20, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

3 Answers

Www.ge.net How to get rid of flashing lock door on JGBP35


There is a button on the left upper corner by the door when you open oven. Hold the button down and press the clear button on the panel till the display clears itself. Just like that you have a functional oven.

Jun 25, 2009 | GE Spectra JGBP35 Gas Kitchen Range

3 Answers

Message says "unlock door", but the door is already unlocked.


redo the self clean, something got stuck... also, dont use the selfclean again, use easy off overnight, self cleaning sucks and uses lots of $$$$$$$.

Feb 13, 2009 | Kenmore 75620 / 75621 / 75622 / 75624 Gas...

1 Answer

GE Profile XL44 Spectra gas oven


try to hold down the light switch on the door set it up for another cleaning hit start when oven clean door lock showes hit cancel if that doesnt work try unplugging it for three min fyi the doors can take up to an hour to un lock after cleaning its so it dont burn your face off from the intense heat after cleaning some take 2

Feb 14, 2008 | GE Profile JGS968 Gas Kitchen Range

5 Answers

GE Profile XL44 Spectra gas oven


My Spectra XL44 suddenly refuses to ignite the baking portion of the oven - broiler and top work just fine. The day before it was working fine. Wondered if it was an electrical egnition problem - gas feed or what??? Help!! Mregressor@aol.com

Nov 13, 2006 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...